Preparation and Thermo-Mechanical Characterization of Chitosan Loaded Methylcellulose-Based Biodegradable Films: Effects of Gamma Radiation

Chitosan (0.1–1%, w/w), dissolved in 2% acetic acid solution, was added into 1% methylcellulose (MC)-based formulation containing 0.5% vegetable oil, 0.25% glycerol and 0.025% Tween^?80. Films were prepared by casting. Puncture strength (PS), puncture deformation (PD), viscoelasticity coefficient and water vapour permeability (WVP) of the films were measured. The PS value of 312 N/mm was observed for MC-based films containing 0.25% chitosan. Values of PD, viscoelasticity coefficient and WVP of these films were 5.0 mm, 44.1%, and 6.0 g mm/m² day kPa, respectively. The MC-based films containing 0.25% chitosan were also exposed to gamma radiation (0.5–50 kGy). The PS of the treated films decreased significantly from 312 at 0 kGy to 201 N/mm when treated at a dose of 50 kGy. However, WVP values were not affected by increasing irradiation the dose used. The Fourier Transform Infrared spectroscopy supported the molecular interactions due to addition of chitosan in MC-based films. Thermo gravimetric analysis and differential scanning calorimetric experiments showed that thermal properties of the films were significantly improved by chitosan loading. Surface topography of the films was studied by scanning electron microscopy and found rougher due to chitosan addition.     

Pregnancy after preimplantation genetic diagnosis for Sanjad–Sakati syndrome

Sanjad–Sakati syndrome (SSS) is an autosomal recessive disorder characterized by congenital hypoparathyroidism, growth and mental retardation. In Saudi Arabia, the disease is caused by a deletion of 12 bp (155-166nt) in the tubulin-specific chaperone E gene. In a family with two affected siblings with SSS, preimplantation genetic diagnosis (PGD) was performed. Fluorescent PCR (F-PCR) was utilized to check the heterozygosity and the homozygosity status of the parents and the affected children, respectively. F-PCR was then optimized for single-cell analysis by using peripheral blood lymphocytes. The patient underwent a cycle with intra-cytoplasmic sperm injection. A total of 11 embryos were obtained and biopsied. There were five heterozygous, three homozygous affected and three normal embryos. One heterozygous and one normal embryo were transferred because of their very good quality (morula). A singleton pregnancy was obtained, and amniosynthesis confirmed the presence of the heterozygous fetus. These results show for the first time, the feasibility of PGD for SSS. Copyright © 2004 John Wiley & Sons, Ltd.     

Sequestration of toxic Pb（II） ions by chemically treated rubber （Hevea brasiliensis ） leaf powder

Rubber leaf powder (an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(II) ions from aqueous solution was evaluated. The interactions between Pb(II) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX). The effects of several important parameters which can affect adsorption capacity such as pH, adsorbent dosage, initial lead concentration and contact time were studied. The optimum pH range for lead adsorption was 4–5. Even at very low adsorbent dosage of 0.02 g, almost 100% of Pb(II) ions (23 mg/L) could be removed. The adsorption capacity was also dependent on lead concentration and contact time, and relatively a short period of time (60–90 min) was required to reach equilibrium. The equilibrium data were analyzed with Langmuir, Freundlich and Dubinin-Radushkevich isotherms. Based on Langmuir model, the maximum adsorption capacity of lead was 95.3 mg/g. Three kinetic models including pseudo first-order, pseudo second-order and Boyd were used to analyze the lead adsorption process, and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.     

Infectious Pepper Mild Mottle Virus and Human Adenoviruses as Viral Indices in Sewage and Water Samples

Food and Environmental Virology - The objective of this study was to compare human adenoviruses (HAdVs) genome and infectivity, polyomaviruses (JC and BK) genome (JCPyVs) and (BKPyVs), Pepper Mild...     

Non-conforming fibre-reinforced green polypropylene composite panels: a case study

Journal of Material Cycles and Waste Management - Coal Bottom Ash (CBA) is one of the byproducts of the coal combustion process in power plants that accumulates in landfills due to its porous,...     

Nutraceuticals and mitochondrial oxidative stress: bridging the gap in the management of bronchial asthma

Environmental Science and Pollution Research - Asthma is a chronic inflammatory disease primarily characterized by inflammation and reversible bronchoconstriction. It is currently one of the...