Prenatal identification of small mosaic markers of different chromosomal origins

In situ hybridization using a series of alphoid DNA probes has demonstrated the origin of two small accessory mosaic marker chromosomes ascertained from 1079 amniocenteses. These markers appeared to be de novo, derived from acrocentric chromosomes, and identical by traditional cytogenetic staining (G, Q, C, AgNOR, Hoechst-distamycin). Molecular characterization showed that one marker had originated from chromosome 14, the other from chromosome 22. Clinical outcome in both cases was normal.     

Physicochemical characterization of forest and sugarcane leaf combustion's particulate matters using electron microscopy, EDS, XRD and TGA

Physical characteristics and quantitative elemental composition of PM and residual ash produced from sugarcane leaves (SCL) combustion were investigated using TEM-EDS compared with forest leaves (FRL). SEM-EDS was used to analyze the microstructure and chemical composition of biomass raw leaves and PM. XRD analysis was also performed to investigate the characterization of the crystalline nanostructure, structure of PM, and residual ash compared to the TEM image processing method. The oxidation kinetics of biomass raw materials, PM, and residual ash were investigated by TGA. The morphology of fine and ultrafine agglomerate structure of SCL soot and residual ash are not significantly different from the FRL soot and residual ash. The average diameter sizes of single primary nanoparticles of SCL and FRL soot are approximately 37 nm and 35 nm, while the sizes of residual ash are about 18 nm and 22 nm, respectively. The single primary nanoparticles of soot are mainly composed of curve line crystallites of carbon fringes, while residual ash is composed of straight-line lattice fringes. The average fringe lengths of SCL and FRL soot are about 1.25 nm and 1.04 nm from the outer shell and 0.89 nm and 0.74 nm from the inner core. The interlayer spacing of curve line carbon fringes of SCL and FRL soot is approximately 0.359 nm and 0.362 nm by the TEM image analysis and it was matched with XRD analysis. The biomass PMs are mainly composed of soot, Si, Ca, and K compounds: SiO₂, CaCO₃, and KCl.     

Influence of nutrient levels on uptake and effects of mercury, cadmium, and lead in water spinach

In Southeast Asia the aquatic macrophyte water spinach (Ipomoea aquatica Forsk.) is a popular vegetable that is cultivated in freshwater courses. These often serve as recipients for domestic and other sorts of wastewater that often contain a variety of pollutants, such as heavy metals. In addition, fertilizers are frequently used where water spinach is cultivated commercially for the food market. To estimate the importance of ambient nutrient concentrations for accumulation of mercury (Hg), cadmium (Cd), and lead (Pb) in water spinach, plants were exposed to nutrient solutions of different strength and with varying metal concentrations. Metal-induced toxic effects, which might possibly affect the yield of the plants, were also studied. The lower the nutrient strength in the medium was, the higher the metal concentrations that accumulated in the different plant parts and the lower the metal concentration in the medium at which metal-induced toxic effects occurred. Accordingly, internal metal concentrations in the plants were correlated to toxic effects. Plants exposed to metals retained a major proportion of the metals in the roots, which had a higher tolerance than shoots for high internal metal concentrations.     

Structural and functional diversity of microbial communities from a lake sediment contaminated with trenbolone, an endocrine-disrupting chemical

Effects of trenbolone (TBOH), a hormone used in cattle production, on the structure and function of microbial communities in a fresh water sediment from a lake in Southern Germany were studied in a microcosm experiment. The microbial community structure and the total gene pool of the sediment, assessed by 16S rRNA/rDNA and RAPD fingerprint analysis, respectively, were not significantly affected by TBOH. In contrast, the N-acetyl-glucosaminidase activity was almost 50% lower in TBOH treated samples (P<0.05). Also, the substrate utilization potential, measured using the BIOLOG system, was reduced after TBOH treatment. Interestingly, this potential did not recover at the end of the experiment, i.e. 19 days after the addition of the chemical. Repeated application of TBOH did not lead to an additional reduction in the substrate utilization potential. Overall results indicate that microbial community function was more sensitive to TBOH treatment than the community structure and the total gene pool.     

Bis(4-chlorophenyl) sulfone (BCPS) in Swedish marine and fresh water wildlife-a screening study

Bis(4-chlorophenyl) sulfone (BCPS) is a high production volume chemical (HPVC) applied in thermostable polymers. BCPS has been detected as an environmental contaminant both in Europe and in North America but it is still not a commonly studied pollutant. In this study, three Baltic Sea fish species; herring (Clupea harengus), salmon (Salmo salar) and perch (Perca fluviatilis) from the Swedish coast, and one inland fish species, arctic char (Salvelinus alpinus), were analysed to screen for the occurrence and distribution of BCPS. Salmon and arctic char, were sampled in the early 1970s as well as the late 1990s. Fish eating grey seal (Halichoerus gryphus) and guillemot (Uria aalge) from the Baltic Sea were included to screen for whether BCPS biomagnify or not. The representativeness of the analysed samples for studying bioaccumulation of environmental pollutants was compared through analysis of two well known persistent and bioaccumulating compounds, 2,2',4,4',5,5'-hexachlorobiphenyl (CB-153), and 4,4'-DDE. Pooled muscle and blubber samples based on 4-10 individuals were used for analysis, as well as individual samples of grey seal blubber. 2,4,4'-Trichlorodiphenyl sulfone, was synthesised and applied as an internal standard. BCPS was detected in all marine samples but in only one of the fresh water fish samples. The highest BCPS concentrations detected, 1600 and 1900 ng/g lipid weighet (l.w.), were found in muscle from Baltic guillemot. The results indicate that BCPS is bioaccumulated in both grey seal and guillemot, and that the guillemot has higher concentrations of BCPS than the grey seal (50-500 ng/g l.w.). The concentrations found in different species of fish from the Baltic Sea ranged between 15-37 ng/g l.w. and lower concentrations were found in freshwater species (n.d.-1.8 ng/g l.w.). The present study shows that BCPS is found in all investigated species of wildlife but, in most species, still at low concentrations. However, the guillemot has levels in the low ppm range indicating a considerable biomagnification of BCPS in this species.     

The effect of muscle activation on neck response

Prevention of neck injuries due to complex loading, such as occurs in traffic accidents, requires knowledge of neck injury mechanisms and tolerances. The influence of muscle activation on outcome of the injuries is not clearly understood. Numerical simulations of neck injury accidents can contribute to increase the understanding of injury tolerances. The finite element (FE) method is suitable because it gives data on stress and strain of individual tissues that can be used to predict injuries based on tissue level criteria.The aim of this study was to improve and validate an anatomically detailed FE model of the human cervical spine by implement neck musculature with passive and active material properties. Further, the effect of activation time and force on the stresses and strains in the cervical tissues were studied for dynamic loading due to frontal and lateral impacts.The FE model used includes the seven cervical vertebrae, the spinal ligaments, the facet joints with cartilage, the intervertebral disc, the skull base connected to a rigid head, and a spring element representation of the neck musculature. The passive muscle properties were defined with bilinear force-deformation curves and the active properties were defined using a material model based on the Hill equation. The FE model's responses were compared to volunteer experiments for frontal and lateral impacts of 15 and 7 g. Then, the active muscle properties where varied to study their effect on the motion of the skull, the stress level of the cortical and trabecular bone, and the strain of the ligaments.The FE model had a good correlation to the experimental motion corridors when the muscles activation was implemented. For the frontal impact a suitable peak muscle force was 40 N/cm2 whereas 20 N/cm2 was appropriate for the side impact. The stress levels in the cortical and trabecular bone were influenced by the point forces introduced by the muscle spring elements; therefore a more detailed model of muscle insertion would be preferable. The deformation of each spinal ligament was normalized with an appropriate failure deformation to predict soft tissue injury. For the frontal impact, the muscle activation turned out to mainly protect the upper cervical spine ligaments, while the musculature shielded all the ligaments disregarding spinal level for lateral impacts. It is concluded that the neck musculature does not have the same protective properties during different impacts loadings.     

Potential nitrification and denitrification on different surfaces in a constructed treatment wetland

Improved understanding of the importance of different surfaces in supporting attached nitrifying and denitrifying bacteria is essential if we are to optimize the N removal capacity of treatment wetlands. The aim of this study was therefore to examine the nitrifying and denitrifying capacity of different surfaces in a constructed treatment wetland and to assess the relative importance of these surfaces for overall N removal in the wetland. Intact sediment cores, old pine and spruce twigs, shoots of Eurasian watermilfoil (Myriophyllum spicatum L.), and filamentous macro-algae were collected in July and November 1999 in two basins of the wetland system. One of the basins had been constructed on land that contained lots of wood debris, particularly twigs of coniferous trees. Potential nitrification was measured using the isotope-dilution technique, and potential denitrification was determined using the acetylene-inhibition technique in laboratory microcosm incubations. Nitrification rates were highest on the twigs. These rates were three and 100 times higher than in the sediment and on Eurasian watermilfoil, respectively. Potential denitrification rates were highest in the sediment. These rates were three times higher than on the twigs and 40 times higher than on Eurasian watermilfoil. The distribution of denitrifying bacteria was most likely due to the availability of organic material, with higher denitrification rates in the sediment than on surfaces in the water column. Our results indicate that denitrification, and particularly nitrification, in treatment wetlands could be significantly increased by addition of surfaces such as twigs.     

Filtration and recirculation of early amniotic fluid. Evaluation of cell cultures from 100 diagnostic cases

Due to the low cell concentration, cultures from early amniotic fluid specimens usually require 2–3 weeks in culture prior to karyotyping. The purpose of this study was to evaluate the culture quality of amniotic fluid cells from early pregnancy, obtained by a new filter technique. The hypothetical advantage of the technique was that the increased cell yield might reduce the culture time before karyotyping. Culture quality was assessed by the number of colonies, the percentage of colonies containing mitoses in filter and control cultures, and the culture time. The setting was a consecutive clinical trial. One hundred samples were obtained from ongoing pregnancies at 11–14 weeks of gestation (mean 12·8 weeks). By circulating a mean of 26 ml of amniotic fluid through a cell filter system leading the cell-free fluid back to the amniotic cavity, the cell yield was increased in the sample of 7 ml corresponding to the dead space of the filter system. The culture results were compared with control cultures from 5 ml samples drawn from the same pregnancies prior to recirculation. The cultures from the first flushing of the filter system yielded 2·6 times more colonies and in total 4·2 times more colonies were found in the three cultures grown from each filter sample when compared with the control cultures. Moreover, the filter cultures showed significantly more colonies with mitoses. The mean culture time was 8·0 days for the filter cultures, from which the karyotypes were analysed. The controls would have needed more time in culture to fulfil the diagnostic criteria for karyotyping. One case of 47,XY, + 21 was found; the rest had normal karyotypes. We conclude that the filter technique improves the culture quality of early amniotic fluid samples and allows early arrest of the cultures.