Temporal pessimism and spatial optimism in environmental assessments: An 18-nation study

The personal assessments of the current and expected future state of the environment by 3232 community respondents in 18 nations were investigated at the local, national, and global spatial levels. These assessments were compared to a ranking of each country's environmental quality by an expert panel. Temporal pessimism (“things will get worse”) was found in the assessments at all three spatial levels. Spatial optimism bias (“things are better here than there”) was found in the assessments of current environmental conditions in 15 of 18 countries, but not in the assessments of the future. All countries except one exhibited temporal pessimism, but significant differences between them were common. Evaluations of current environmental conditions also differed by country. Citizens' assessments of current conditions, and the degree of comparative optimism, were strongly correlated with the expert panel's assessments of national environmental quality. Aside from the value of understanding global trends in environmental assessments, the results have important implications for environmental policy and risk management strategies.     

Acute and chronic effects of nano- and non-nano-scale TiO2 and ZnO particles on mobility and reproduction of the freshwater invertebrate Daphnia magna

Among the emerging literature addressing the biological effects of nanoparticles, very little information exists, particularly on aquatic organisms, that evaluates nanoparticles in comparison to non-nanocounterparts. Therefore, the potential effects of nano-scale and non-nano-scale TiO₂ and ZnO on the water flea, Daphnia magna, were examined in 48-h acute toxicity tests using three different test media, several pigment formulations – including coated nanoparticles – and a variety of preparation steps. In addition, a 21-d chronic Daphnia reproduction study was performed using coated TiO₂ nanoparticles. Analytical ultracentrifugation analyses provided evidence that the nanoparticles were present in a wide range of differently sized aggregates in the tested dispersions. While no pronounced effects on D. magna were observed for nano-scale and non-nano-scale TiO₂ pigments in 19 of 25 acute (48-h) toxicity tests (EC50 > 100 mg L⁻¹), six acute tests with both nano- and non-nano-scale TiO₂ pigments showed slight effects (EC10, 0.5–91.2 mg L⁻¹). For the nano-scale and non-nano-scale ZnO pigments, the acute 48-h EC50 values were close to the 1 mg L⁻¹ level, which is within the reported range of zinc toxicity to Daphnia. In general, the toxicity in the acute tests was independent of particle size (non-nano-scale or nano-scale), coating of particles, aggregation of particles, the type of medium or the applied pre-treatment of the test dispersions. The chronic Daphnia test with coated TiO₂ nanoparticles demonstrated that reproduction was a more sensitive endpoint than adult mortality. After 21 d, the NOEC for adult mortality was 30 mg L⁻¹ and the NOEC for offspring production was 3 mg L⁻¹. The 21-d EC10 and EC50 values for reproductive effects were 5 and 26.6 mg L⁻¹, respectively. This study demonstrates the utility of evaluating nanoparticle effects relative to non-nano-scale counterparts and presents the first report of chronic exposure to TiO₂ nanoparticles in D. magna.     

Strong Influence of Variable Treatment on the Performance of Numerically Defined Ecological Regions

Numerical clustering has frequently been used to define hierarchically organized ecological regionalizations, but there has been little robust evaluation of their performance (i.e., the degree to which regions discriminate areas with similar ecological character). In this study we investigated the effect of the weighting and treatment of input variables on the performance of regionalizations defined by agglomerative clustering across a range of hierarchical levels. For this purpose, we developed three ecological regionalizations of Switzerland of increasing complexity using agglomerative clustering. Environmental data for our analysis were drawn from a 400 m grid and consisted of estimates of 11 environmental variables for each grid cell describing climate, topography and lithology. Regionalization 1 was defined from the environmental variables which were given equal weights. We used the same variables in Regionalization 2 but weighted and transformed them on the basis of a dissimilarity model that was fitted to land cover composition data derived for a random sample of cells from interpretation of aerial photographs. Regionalization 3 was a further two-stage development of Regionalization 2 where specific classifications, also weighted and transformed using dissimilarity models, were applied to 25 small scale “sub-domains” defined by Regionalization 2. Performance was assessed in terms of the discrimination of land cover composition for an independent set of sites using classification strength (CS), which measured the similarity of land cover composition within classes and the dissimilarity between classes. Regionalization 2 performed significantly better than Regionalization 1, but the largest gains in performance, compared to Regionalization 1, occurred at coarse hierarchical levels (i.e., CS did not increase significantly beyond the 25-region level). Regionalization 3 performed better than Regionalization 2 beyond the 25-region level and CS values continued to increase to the 95-region level. The results show that the performance of regionalizations defined by agglomerative clustering are sensitive to variable weighting and transformation. We conclude that large gains in performance can be achieved by training classifications using dissimilarity models. However, these gains are restricted to a narrow range of hierarchical levels because agglomerative clustering is unable to represent the variation in importance of variables at different spatial scales. We suggest that further advances in the numerical definition of hierarchically organized ecological regionalizations will be possible with techniques developed in the field of statistical modeling of the distribution of community composition.     

Strategies used to Guide the Design and Implementation of a National River Monitoring Programme in South Africa

This article explores the strategies that were, and are being, used to facilitate the transition from scientific developmentto operational application of the South African River Health Programme (RHP). Theoretical models from the field of the management of technology are used to provide insight into the dynamics that influence the relationship between the creation and application of environmental programmes, and the RHP in particular. Four key components of the RHP design are analysed,namely the (a) guiding team, (b) concepts, tools and methods, (c) infra-structural innovations and (d) communication. These key components evolved over three broad life stages of the programme, which are called the design, growth and anchoring stages.     

Fourth WHO-coordinated survey of human milk for persistent organic pollutants (POPs): Belgian results

Persistent organic pollutants (POPs) are chemicals that accumulate in the food chain and are toxic to humans and wildlife. The fourth World Health Organization (WHO) survey on POP levels in human milk (2006-2009) aims to provide baseline and trend information on human exposure to POPs. So far Belgium participated in all three previous rounds (1988, 1992, 2001). Whereas the first three rounds focused on determination of dioxins and PCBs in pooled (mixed) samples, the fourth survey comprised the analyses of individual milk samples for nine "basic POPs" (chlorinated pesticides and indicator PCBs) and of pooled milk samples for "basic POPs", "advanced POPs" (dioxins and dioxin-like PCBs) and "optional POPs" (polybrominated diphenylethers [PBDEs], polybrominated dioxins and dibenzofurans [PBrDD/F], mixed halogenated dioxins and dibenzofurans [PXDD/F] and hexabromocyclododecane [HBCD]). For the Belgian participation human milk samples were collected during the summer of 2006 from 197 women between 18 and 30 years old distributed over all Belgian provinces. The individual samples were analyzed in a Belgian Laboratory for "basic" POPs. A pooled sample was made from 178 individual samples and analyzed by the WHO Reference Laboratory for the "basic, advanced and optional" POPs. The results indicate that most organochlorinated pesticides banned 25-30 years ago were below or around detection limits in Belgian human milk samples although DDE was still found at low levels in all samples. Over the last five years the levels of marker PCBs and PCDD/Fs in Belgian human milk decreased, respectively, by 58% and 39%. For some of the other emerging or older compounds recent international data are needed to allow comparison. This shows the importance of international studies as run by WHO.     

Metal accumulation in the earthworm Lumbricus rubellus. Model predictions compared to field data

The mechanistic bioaccumulation model OMEGA (Optimal Modeling for Ecotoxicological Applications) is used to estimate accumulation of zinc (Zn), copper (Cu), cadmium (Cd) and lead (Pb) in the earthworm Lumbricus rubellus. Our validation to field accumulation data shows that the model accurately predicts internal cadmium concentrations. In addition, our results show that internal metal concentrations in the earthworm are less than linearly (slope<1) related to the total concentration in soil, while risk assessment procedures often assume the biota-soil accumulation factor (BSAF) to be constant. Although predicted internal concentrations of all metals are generally within a factor 5 compared to field data, incorporation of regulation in the model is necessary to improve predictability of the essential metals such as zinc and copper.     

Spatial variation in concentrations and patterns of the PCDD/F and dioxin-like-PCB content in herring from the northern Baltic Sea

The purpose of the current study was to investigate spatial and seasonal variation of dioxin and dioxin-like PCB (dl-PCB) content in herring sampled along the northern Baltic Sea coast and map out risk zones for dioxins and dl-PCBs. We further aimed to investigate relationships between congener distribution (pattern) and sampling location and season. The results showed that there were distinct geographical differences in concentrations of dioxins, dibenzofurans and dl-PCBs along the Swedish coast, from the Bothnian Bay to north Baltic Proper, with the highest levels detected in the southern Bothnian Sea. The majority of the locations showed concentrations above the prescribed maximum for dioxin residues (4 TEQ pg g(-1) wet weight [w.w.]). If all the edible parts of the fish (muscle, subcutaneous fat and skin) are considered, the estimated concentrations exceeded the prescribed maximum level in the whole study area for herring collected during spring-summer. Concentrations in herring caught during spring-summer compared to concentrations in herring sampled in the autumn indicated seasonal variation. The pattern analysis showed a variation in relative congener concentration at the different sampling locations (spring-summer). Pattern differences were also noticed between seasons.     

The impact of benthic macrofauna for nutrient fluxes from Baltic Sea sediments

This article focuses on the ecological role of benthic macrofauna on nutrient dynamics and benthic-pelagic coupling in the Baltic Sea with relation to eutrophication. Generally, benthic macrofaunal activities have large effects on sediment biogeochemistry and often with stimulatory effects on processes that counteract eutrophication, i.e., denitrification and increased phosphorus retention of the sediment. The degree of faunal impact on such processes varies depending on faunal density and functional group composition. The effect of macrofaunal activities on sediment nutrient dynamics can also result in a higher nitrogen: phosporus ratio of the sediments efflux compared with sediments without macrofauna. Increased internal nutrient loading during eutrophication-induced anoxia is suggested to be caused both by altered sediment biogeochemical processes and through reduced or lost bioturbating macrofauna and thereby a reduced stimulatory effect from their activities on natural purification processes of the Baltic Sea ecosystem.     

Equivalent leak definitions for Smart LDAR (leak detection and repair) when using optical imaging technology

Controlling fugitive emissions from leaks in petrochemical industry process equipment now requires periodic monitoring of valves, flanges, pumps etc., typically on a quarterly basis. Previous studies have shown that over 90% of the reducible emissions come from approximately 0.1% of the components, i.e. the large leakers. A new, and more cost-effective approach for controlling these large leakers would entail more frequent monitoring of process equipment, allowing for the detection and repair of the highly leaking components that contribute the most to emissions. This approach has been called "Smart LDAR." New optical imaging instruments, which significantly reduce monitoring costs, are now available to implement such an alternative work practice. This work describes the determination of the leak detection sensitivity (equivalency threshold) that an optical imaging instrument must achieve to ensure that it will provide at least the equivalent emission control of the current leak detection and repair practice. Equivalency thresholds were developed for various monitoring intervals. The U.S. Environment Protection Agency's Monte Carlo simulation approach was used to perform the analysis and to demonstrate that optical imaging, which is capable of identifying all of the largest leakers, can provide better control of fugitive emissions.     

Determination of total chlorine and bromine in solid wastes by sintering and inductively coupled plasma-sector field mass spectrometry

A sample preparation method based on sintering, followed by analysis by inductively coupled plasma-sector field mass spectrometry (ICP-SFMS) for the simultaneous determination of chloride and bromide in diverse and mixed solid wastes, has been evaluated. Samples and reference materials of known composition were mixed with a sintering agent containing Na₂CO₃ and ZnO and placed in an oven at 560 °C for 1 h. After cooling, the residues were leached with water prior to a cation-exchange assisted clean-up. Alternatively, a simple microwave-assisted digestion using only nitric acid was applied for comparison. Thereafter the samples were prepared for quantitative analysis by ICP-SFMS. The sintering method was evaluated by analysis of certified reference materials (CRMs) and by comparison with US EPA Method 5050 and ion chromatography with good agreement. Median RSDs for the sintering method were determined to 10% for both chlorine and bromine, and median recovery to 96% and 97%, respectively. Limits of detection (LODs) were 200 mg/kg for chlorine and 20 mg/kg for bromine. It was concluded that the sintering method is suitable for chlorine and bromine determination in several matrices like sewage sludge, plastics, and edible waste, as well as for waste mixtures. The sintering method was also applied for determination of other elements present in anionic forms, such as sulfur, arsenic, selenium and iodine.