Female sand gobies gain direct benefits by choosing males with eggs in their nests

In some fish species with paternal care, females prefer to spawn with males whose nests already contain eggs. Several hypotheses have been put forward to explain this behaviour, such as reduced risk of predation or cannibalism (the dilution effect), increased parental investment, and mate copying. This experimental study focuses on female mate choice in the sand goby, Pomatoschistus minutus. Females were found to choose males with eggs in their nests. In addition, hatching success increased with clutch size, mainly because males with larger clutches showed less filial cannibalism. Increased egg survival in large clutches may thus be explained by a combination of the dilution effect and higher parental investment. In another experiment, females did not seem to copy the observed mate choice of other females. In conclusion, female preference for males with eggs in their nests is adaptive, and can be explained by direct benefits, as more surviving offspring are produced. Received: 23 December 1995/Accepted after revision: 11 May 1996     

Reserves, resilience and dynamic landscapes

In a world increasingly modified by human activities, the conservation of biodiversity is essential as insurance to maintain resilient ecosystems and ensure a sustainable flow of ecosystem goods and services to society. However, existing reserves and national parks are unlikely to incorporate the long-term and large-scale dynamics of ecosystems. Hence, conservation strategies have to actively incorporate the large areas of land that are managed for human use. For ecosystems to reorganize after large-scale natural and human-induced disturbances, spatial resilience in the form of ecological memory is a prerequisite. The ecological memory is composed of the species, interactions and structures that make ecosystem reorganization possible, and its components may be found within disturbed patches as well in the surrounding landscape. Present static reserves should be complemented with dynamic reserves, such as ecological fallows and dynamic successional reserves, that are part of ecosystem management mimicking natural disturbance regimes at the landscape level.     

Impact of ozone and reduced water supply on the biomass accumulation of Norway spruce saplings

Norway spruce saplings [Picea abies (L.) Karst.] were exposed during four growing seasons to two different ozone treatments in open-top chambers: charcoal filtered air (CF), and non-filtered air with extra ozone (NF+, 1.4xambient concentrations). Within each ozone treatment the saplings were either kept well watered or treated with a 7-8 week period with reduced water supply each growing season. The total biomass of the trees was measured in April and September during each of the last three growing seasons. NF+ significantly reduced the total biomass accumulation of Norway spruce saplings during the fourth growing season. No interaction between ozone and reduced water supply could be detected. The magnitude of the ozone impact after 4 years of exposure was an 8% reduction of the total plant biomass and a 1.5% reduction of the RGR. The reduced water supply reduced the total biomass 29% and the RGR 12%.     

Quantifying spatial patterns of landscapes

In this paper we discuss information theoretical landscape indices based on data from digitized maps in grid format: measures based on Shannon's entropy, e.g. the measures of diversity and contagion; and measures based on conditional entropy, e.g. a new index which can be seen as an alternative to the measure of contagion that does not have the disadvantage of being highly correlated to the measure of diversity. We also introduce a measurement on how much information is contained in a coarse-scale map about a fine-scale map.     

Enantiomer fractions of chiral organochlorine pesticides and polychlorinated biphenyls in standard and certified reference materials

Enantiomeric ratios (ERs) and enantiomeric fractions (EFs) of a number of chiral organochlorine pesticides and PCB atropisomers were measured by chiral gas chromatography/mass spectrometry (GC/MS) in five standard (SRM) and certified (CRM) reference materials: SRM 1588a (organics in cod liver oil), SRM 1945 (organics in whale blubber), Marine Mammal Quality Assurance Exercise Control Material IV (NIST IV, organics in whale blubber), CRM trout, and CRM EC-5 (sediment). Target analytes were cis- and trans-chlordane, heptachlor exo-epoxide, oxychlordane, U82, MC5, MC6, MC7, o,p^′-DDT, and PCB congeners 91, 95, 136, 149, 174, 176, and 183. Measured ERs and EFs are in close agreement with the few literature values reported for some of these analytes in SRMs and CRMs. Chiral PCB ERs and EFs measured by one-dimensional chiral GC/MS were similar to values measured using multidimensional chiral GC/MS. Non-racemic chiral compositions are in agreement with known uptake and biotransformation in the respective environmental matrices. These values should aid in the quality assurance/quality control methodologies for chiral environmental chemistry using standardized reference materials.     

Validation of a diffusive sampler for NO2

A diffusive sampler for NO2, Willems badge, was validated in laboratory experiments and field tests. The collecting reagent for NO2 in the sampler is triethanolamine, and the analysis is based on a modified colorimetric method, the Saltzman method. The analysis was performed by a flow injection analysis (FIA) technique. The sampling rate for the sampler was determined to be 40.0 ml min-1. There was no effect of NO2 concentration or relative humidity on sampling rate, and the influence of sampling time was found to be small. The detection limit was 4 micrograms m-3 for a 24 h sample. The capacity is high enough to allow sampling of 150 micrograms m-3 for 7 days, which is twice the recommended Swedish short-term (24 h) guideline value as a 98-percentile over 6 months. In field tests, the sampler performed well, even at wind speeds higher than 2 m s-1, and at low temperatures. The overall uncertainty of the method was 24%. The sensitivity and capacity of the method also make it suitable for personal sampling for 2-8 h in working environments.     

A one year study of the seasonal variations of sDDT and PCB levels in fish from heated and unheated areas near a nuclear power plant

An investigation of the influence of excess heat discharge from a nuclear power plant on the residual levels of the sDOT and PCB in roach and perch has been made during a period of one year. A seasonal variation of the residual concentrations was observed, with the highest levels during spring and early summer and lower more stable levels in the autumn. Significantly higher levels of the sDDT and PCB was observed in perch from the cooling water recipient as compared to values in perch from the intake area. No significant differences could however be verified for roach. The result stress the importance that, in a monitoring program, a sampling period with stable ecological conditions is selected.     

Life cycle inventory of recycling portable nickel–cadmium batteries

In this study, the environmental impact of recycling portable nickel–cadmium (NiCd) batteries in Sweden is evaluated. A life cycle assessment approach was used to identify life cycle activities with significant impact, the influence of different recycling rates and different time boundaries for emissions of landfilled metals. Excluding the user phase of the battery, 65% of the primary energy is used in the manufacture of batteries while 32% is used in the production of raw materials. Metal emissions from batteries to water originate (96–98%) from landfilling and incineration. The transportation distance for the collection of batteries has no significant influence on energy use and emissions. Batteries manufactured with recycled nickel and cadmium instead of virgin metals have 16% lower primary energy use. Recycled cadmium and nickel metal require 46 and 75% less primary energy, respectively, compared with extraction and refining of virgin metal. Considering an infinite time perspective, the potential metal emissions are 300–400 times greater than during the initial 100 years. From an environmental perspective, the optimum recycling rate for NiCd batteries tends to be close to 100%. It may be difficult to introduce effective incitements to increase the battery collection rate. Cadmium should be used in products that are likely to be collected at the end of their life, otherwise collection and subsequent safe storage in concentrated form seems to offer the best solution to avoid dissipative losses.     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.