The relationship between agricultural intensification and biological control: experimental tests across Europe

Agricultural intensification can affect biodiversity and related ecosystem services such as biological control, but large-scale experimental evidence is missing. We examined aphid pest populations in cereal fields under experimentally reduced densities of (1) ground-dwelling predators (-G), (2) vegetation-dwelling predators and parasitoids (-V), (3) a combination of (1) and (2) (-G-V), compared with open-fields (control), in contrasting landscapes with low vs. high levels of agricultural intensification (AI), and in five European regions. Aphid populations were 28%, 97%, and 199% higher in -G, -V, and -G-V treatments, respectively, compared to the open fields, indicating synergistic effects of both natural-enemy groups. Enhanced parasitoid: host and predator: prey ratios were related to reduced aphid population density and population growth. The relative importance of parasitoids and vegetation-dwelling predators greatly differed among European regions, and agricultural intensification affected biological control and aphid density only in some regions. This shows a changing role of species group identity in diverse enemy communities and a need to consider region-specific landscape management.     

Fuzzy control for the process of heat removal during the composting of agricultural waste

This paper shows the concept and preliminary test of the composting process control with fuzzy logic. The temperature in the compost heap during the process is greater than 80 °C. Because wastes of agricultural origin do not require hygienization, part of the heat can by retrieved, which lowers the temperature in the heap to 55 °C (this is also the optimum temperature for the composting process). The heat retrieved from a compost heap can be used in another place. Therefore, a composting system was developed in which the aeration rate and heat removal rate can be adjusted. There are two goals of this system: maximising the amount of the heat retrieved from the heap and minimising the duration of the composting process. In the preliminary experiments freshly mown grass with 50 % cabbage was used as the compost material. The results show that the fuzzy logic control system functions correctly with respect to calculations. During the study, a median 90 MJ of heat was produced by the bioreactor; the thermophilic phase was shortened to 12 days. There was also a reduction in the emission of ammonia.     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics – Part III: Sawdust

Summary Hardwood sawdust was derivatized either by carboxymethylation, glutaration, maleiation, phthallation, or succination in order to produce anionic materials suitable for complexation with soy protein isolate. Blending each derivative with soy protein isolate resulted in instant precipitation of gels. Infrared spectroscopy and differential scanning calorimetry suggested that each derivative formed a complex with protein. Reaction products could be dried into pellets exhibiting tensile strengths between 0.9–2.4 MPa, suggested that these materials could be promising candidates for biodegradable structural materials.     

Impact of environmental factors on the sampling rate of β-blockers and sulfonamides from water by a carbon nanotube-passive sampler

Passive techniques are a constantly evolving approach to the long-term monitoring of micropollutants, including pharmaceuticals, in the aquatic environment. This paper presents, for the first time, the calibration results of a new CNTs-PSDs (carbon nanotubes used as a sorbent in passive sampling devices) with an examination of the effect of donor phase salinity, water pH and the concentration of dissolved humic acids (DHAs), using both ultrapure and environmental waters. Sampling rates (R_s) were determined for the developed kinetic samplers. It has been observed that the impact of the examined environmental factors on the R_s values strictly depends on the type of the analytes. In the case of β-blockers, the only environmental parameter affecting their uptake rate was the salinity of water. A certain relationship was noted, namely the higher the salt concentration in water, the lower the R_s values of β-blockers. In the case of sulfonamides, water salinity, water pH 7–9 and DHAs concentration decreased the uptake rate of these compounds by CNTs-PSDs. The determined R_s values differed in particular when the values obtained from the experiments carried out using ultrapure water and environmental waters were compared. The general conclusion is that the calibration of novel CNTs-PSDs should be carried out under physicochemical conditions of the aquatic phase that are similar to the environmental matrix.     

Variations of arsenic species content in edible Boletus badius growing at polluted sites over four years

The content of arsenic (As) in mushrooms can vary depending on the concentration level of this metalloid in the soil/substrate. The present study evaluated the content of arsenic in Boletus badius fruiting bodies collected from polluted and non-polluted sites in relation to the content of this element in overgrown substrate. It was found that mushrooms from the arsenic-polluted sites contained mean concentrations from 49 to 450 mg As kg^?1 dry matter (d.m.), with the greatest content found for specimens growing in close proximity of sludge deposits (490±20 mg As kg^?1d.m.). The mean content of total arsenic in mushrooms from clean sites ranged from 0.03 to 0.37 mg kg^?1 It was found that B. badius could tolerate arsenic in soil substrate at concentrations of up to 2500 mg kg^?1, at least. In different years of investigation, shifts in particular arsenic forms, as well as a general increase in the accumulation of organic arsenic content, were observed. The results of this study clearly indicate that B. badius should not be collected for culinary purposes from any sites that may be affected by pollution.     

Ammoniacal leaching and recovery of copper from alloyed low-grade e-waste

The paper concerns a hydrometallurgical method for selective recovery of copper from low-grade electric and electronic wastes. The following consecutive stages were proposed: smelting of the scraps to produce Cu–Zn–Ag alloy, leaching of the alloy in ammoniacal solution, and selective copper electrowinning. Cu–Zn–Ag alloy was a polymetallic and five-phase system. It was leached in chloride, carbonate, sulfate and thiosulfate solutions. This resulted in the separation of the metals, wherein metallic tin and silver as well as lead salts remained in the slimes, while copper and zinc were transferred to the electrolyte. Copper was selectively recovered from the ammoniacal solutions by the electrolysis, leaving zinc ions in the electrolyte. The best conditions of the alloy treatment were obtained in the ammonia–carbonate system, where the final product was copper of high purity (99.9 %) at the current efficiency of 60 %. Thiosulfate solution was not applicable for the leaching of the copper alloy due to secondary reactions of the formation of copper(I) thiosulfate complexes and precipitation of copper(I) sulfide, both inhibiting dissolution of the metallic material.     

Using gas chromatography for indoor-air quality control in conservation and renovation studios.

Investigations were carried out in the Department of Conservation of Painting and Polychrome Sculpture and in the Screen Printing Studio of the Faculty of Art at Nicolaus Copernicus University. Concentration of the vapours of organic solvents was measured in 2 workshops: the Art Conservation Studio and the Screen Printing Studio. This study attempts to evaluate the work environment in both studios by analysing the concentration of vapour solvents over 5 to 7 years of measurements. Volatile solvents--aliphatic and aromatic hydrocarbons, alcohols, esters and ketones--were detected in investigated workplaces. These compounds have a wide range of applications in cleaning and removing old varnishes, lacquers and paints; inhalation is the main route of exposure. Vapour was collected using an active sampling method.     

Tailoring mesoporosity of poly(furfuryl alcohol)-based activated carbons and their ability to adsorb organic compounds from water

In this work it was shown that polymers can be recycled into a promising adsorbent for organic dyes and phenols waste removal. For this, a series of activated carbons (ACs) were produced from mixture of ferrocene or titanium acetylacetonate with poly(furfuryl alcohol) (PFA) by steam activation. The introduction of ferrocene as Fe precursor was found to be an efficient catalyst in mesoporosity development during carbonization and subsequent steam activation at 850 °C, whereas the polymer based only and titanium-doped ACs are typically microporous. The porous structure parameters were determined from nitrogen adsorption isotherms measured at 77 K. Scanning electron microscopy was applied to monitor the metal distribution of metal-loaded char and the surface morphology of activated carbons. The adsorption capacity was found to be dependent mainly on pore size distribution. In the case of phenol adsorption, the adsorption was defined by volume of pore with size 0.8–1.4 nm; whereas, for Congo red best fit was observed for volume of pore with size 2–5 nm.

     

Concentrations of toxic heavy metals and trace elements in raw milk of Simmental and Holstein-Friesian cows from organic farm

Concentrations of toxic heavy metals (cadmium (Cd), lead (Pb)) and major nutritional and trace elements (Ca, Mg, P, Cu, Fe, Mn, Se, Zn) were analyzed in the milk of Simmental (n?=?20) and Holstein-Friesian (n?=?20) cows from an organic farm. Elements were determined using inductively coupled plasma emission atomic spectrometry. The conducted research showed that the milk of Simmental cows was characterized by the more advantageous mineral composition and lower concentration of noxious heavy metals compared to the milk of Holstein-Friesian cows. In the milk of Simmental cows, significantly lower concentrations of Pb and Cd (P?<?0.001) and Cu (P?<?0.05) and significantly higher concentrations of Fe and Mg (P?<?0.05) as well as nonsignificantly higher concentrations of Ca, Mn, and Se were found. In the milk of both breeds, very low Cu concentrations were recorded. The higher-than-recommended concentration of Pb in milk was also found. In the milk of both breeds, the significant positive correlations between concentrations of the following elements were observed: Pb–Cd, Pb–Se, Cd–Se, Cd–Mn, Zn–Cu, Zn–P, Ca–P, Ca–Mg, and Mg–P. The correlations between other elements within each of the analyzed breeds separately were also found.