Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

Nickel in the muscle tissues of freshwater fish from north eastern Poland should not cause human health concerns

Excessive intake of nickel (Ni) is known to produce adverse health effects in humans, including carcinogenicity and allergenicity. The main route of exposure for humans is diet, including fish. There is, however, little information concerning Ni content in freshwater fish in Poland. The aim of the study was to determine the concentrations of Ni in meat tissues of three fish species from north eastern Poland and assess toxic potential to healthy and susceptible sub-groups of individuals. The settings for the study lakes span a range of anthropogenic influence from protected areas to a basin with a town and several villages and another one influenced by a pesticide tomb leakage. Fish were netted and kept frozen until analysis. After defrosting, the fish were filleted and minced. The ashed samples were dissolved in nitric acid and analyzed for Ni by flame atomic absorption spectrometry. Roach meat contained 6.6–23 µg kg^?1 Ni, bream 9.5–178 µg kg^?1, and carp 16.5–139 µg kg^?1. These concentrations are low, indicating that the fish were not excessively contaminated with the metal. Consuming a 250 g portion of fish would result in an average nickel intake of 4 µg for roach, <10 µg for bream, and <20 µg for carp. These values represent only 0.4–2% of the maximum level that is likely to pose a risk of adverse effects as established in the USA. Consumption of fish from the study region need not necessarily pose a health threat.     

Urinary level of homovanillic acid and mercury in autistic children

Catecholamines and their metabolites affect children's nervous system. Dopamine is an important neurotransmitter in the brain. In the routine analysis for diagnostics of diseases, the dopamine metabolite homovanillic acid (HVA) is determined. Mercury is a neurotoxic agent and can cause different undesirable effects on the brain. In the present work a putative correlation between HVA, the main metabolite of dopamine, and mercury in urine of healthy and autistic children was studied. The level of HVA was higher in the urine of autistic children (14.5 ± 8.3 mg L^?1) compared to generally healthy children (4.4 ± 0.5 mg L^?1). The level of mercury in the urine of autistic children was lower (0.36 ± 0.24 µg L^?1) than in the urine of healthy children (2.1 ± 1.0 µg L^?1) showing that there is no correlation between HVA and mercury.     

Gradient ion chromatography of environmentally relevant anions in scrubbers of waste incinerators

Improved separations of a wide range of anions of environmental importance in scrubbers of waste incinerators were achieved by applying a Na₂B₄O₇/NaOH composition gradient of low electrical conductivity in combination with suppressed ion chromatography. Fluoride, Acetate, Formiate and 16 other ions including Iodide could be separated within the same run in less than 20 minutes. The selective detection of small amounts of several anions in presence of excessive amounts of Chloride and Sulfate is discussed. Furtheron various adsorbents were tested for the removal of Phenol as a potential trouble shooting source in 5 ion chromatography. Depending on the analytical task and circumstances several adsorbents reveiled promising properties.     

Roe and red deer as bioindicators of heavy metals contamination in north-western Poland

The present paper examines the degree of environmental contamination in areas covered by the Natura 2000 programme, located in north-western Poland, with selected heavy metals based on their concentration in target organs of roe and red deer. Lead, cadmium, copper, iron, and zinc concentrations were determined by inductively coupled plasma–atomic emission spectrometry. Residues of lead and cadmium were found in most of the analysed samples of roe and red deer organs The concentration of cadmium in the organs of the animals studied was much higher than that of lead. The median for Pb in liver and kidneys was 0.055 and 0.092 μg/g dry weight (d.w.) in roe deer, and 0.067 and 0.081 μg/g d.w. in red deer, respectively. The median for liver and kidney cadmium was 0.770 and 6.139 μg/g d.w. in roe deer, and 0.422 and 6.365 μg/g d.w. in red deer, respectively. Our study has demonstrated that this area is laden with lead and cadmium. This is evidenced by the fact that maximum permissible levels of these elements in the organs of red and roe deer, which were used as bioindicators of environmental contamination, were exceeded.     

Large-scale green synthesis of Cu nanoparticles

This article reports a novel, eco-friendly herbal method to synthesize Cu nanoparticles in large scales. Cu nanoparticles are an alternative to Ag and Au nanoparticles and have potential applications in many industrial areas. Many synthetic routes have been documented for the preparation of copper nanoparticles, but very few routes are eco-friendly and large-scale. We report here the preparation of Cu nanoparticles from aqueous CuSO₄ using non-toxic and inexpensive materials like curd, milk, and herbal extracts such as tamarind and lemon juice as capping agents. X-ray diffraction and transmission electron microscopy show that produced particles are nanocrystalline copper 20–50 nm in size with a face-centered cubic structure. Fourier-transformed infrared spectroscopy evidences the role of organic acids in the capping process. The novelty of this work is the synthesis of Cu nanoparticles from CuSO₄ without electricity and using non-toxic, cheap capping agents.     

Synergy Between Visual and Auditory Signals and Its Influence on the Follow-Up Regulation Quality

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.     

Occupational Exposure to Polycyclic Aromatic Hydrocarbons During Diesel Combustion

Identification and determination of polycyclic aromatic hydrocarbons (PAHs) in Diesel exhaust in the working environment and assessment of workers’ occupational exposure to these suspected human carcinogens were the aim of this experimental investigation.

The range of exposure factors calculated on the basis of 9 individual PAH concentrations determined in personal air samples shows that time-averaged concentration of these compounds did not exceed the Polish Maximum Admissible Concentration (MAC) value for PAHs, that is, 2 μg·m^–3. The highest concentrations of PAHs were determined in the breathing zone of forklift operators. The maximum exposure factor was 0.427 μg·m^–3 (about 1/4 of MAC).     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.