Origin,distribution, and perspective health benefits of particulate matter in the air of underground salt mine: a case study from Bochnia,Poland

Environmental Geochemistry and Health - The composition and distribution of airborne particles in different locations in a salt mine were determined in terms of their origin, the distance from the...     

Effectiveness of potassium ferrate (VI) as a green agent in the treatment and disinfection of carwash wastewater

Environmental Science and Pollution Research - Carwash wastewater treatment with potassium ferrate (VI) (K2FeO4) was optimized by response surface methodology. The optimum conditions for chemical...     

Indicator and probability kriging methods for delineating Cu, Fe, and Mn contamination in groundwater of Najafgarh Block, Delhi, India

Two non-parametric kriging methods such as indicator kriging and probability kriging were compared and used to estimate the probability of concentrations of Cu, Fe, and Mn higher than a threshold value in groundwater. In indicator kriging, experimental semivariogram values were fitted well in spherical model for Fe and Mn. Exponential model was found to be best for all the metals in probability kriging and for Cu in indicator kriging. The probability maps of all the metals exhibited an increasing risk of pollution over the entire study area. Probability kriging estimator incorporates the information about order relations which the indicator kriging does not, has improved the accuracy of estimating the probability of metal concentrations in groundwater being higher than a threshold value. Evaluation of these two spatial interpolation methods through mean error (ME), mean square error (MSE), kriged reduced mean error (KRME), and kriged reduced mean square error (KRMSE) showed 3.52% better performance of probability kriging over indicator kriging. The combined result of these two kriging method indicated that on an average 26.34%, 65.36%, and 99.55% area for Cu, Fe, and Mn, respectively, are coming under the risk zone with probability of exceedance from a cutoff value is 0.6 or more. The groundwater quality map pictorially represents groundwater zones as ??desirable?? or ??undesirable?? for drinking. Thus the geostatistical approach is very much helpful for the planners and decision makers to devise policy guidelines for efficient management of the groundwater resources so as to enhance groundwater recharge and minimize the pollution level.     

The effect of advanced oxidation processes on leachate biodegradation in recycling lysimeters.

Landfill processes were simulated in laboratory-scale bioreactors--lysimeters. The changes in leachate characteristics as well as the influence of advanced oxidation processes (AOPs) on the processes taking place in the sanitary landfill were investigated. Lysimeters were filled with material simulating municipal waste in the city of Lodz, Poland. Compost in the amount of 30% w/w and the methanogens inoculum were added in order to enhance development of a methanogenic phase. The leachate produced in lysimeters was recirculated. In order to investigate the influence of AOPs implementation on processes taking place in landfills two runs in lysimeters were performed, each lasting about 250 days. The leachate composition and biogas composition and production changes showed trends that confirmed that the bench-scale lysimeters appeared suitable to simulate processes taking place in the landfill. The application of AOPs to the leachate recirculated into the lysimeters did not bring about unequivocally positive effects. The ozonation of the leachate, implemented at the beginning of the methanogenic phase, caused slight acceleration (about 2 weeks) of the biodegradation, whereas employment of H2O2/UV led to the inhibition of anaerobic processes.     

A simplified clean-up procedure for the rapid determination of PCDDs and PCDFs based on retention on activated carbon AX-21

Different 2,3,7,8-substituted polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs) were investigated for their retention behaviour on a disposable minicolumn containing activated carbon AX-21. Elution behaviour and recovery were examined, using native and radiolabelled PCDD and PCDF isomers.

A comparison of the total mass chromatograms of PCDDs and PCDFs in an extract from animal adipose tissue, before and after activated carbon treatment, demonstrates the efficiency of this cleanup step with respect to the elimination of interfering compounds.     

Distribution and relationships of trace metals in soft tissue,byssus and shells of Mytilus edulis trossulus from the southern Baltic

Concentrations of Hg, Cd, Pb, Ag, Cu, Zn, Cr, Ni, Co, Mn, and Fe in soft tissues, shells and byssus of blue mussel (Mytilus edulis trossulus) from 23 sites along the Polish coast of the Baltic Sea were determined by AAS method. Byssus, as compared with the soft tissue, concentrated more effectively Pb, Cu, Cr, and especially Ag, Ni, Mn and Fe, moderately Hg and Zn and less effectively Cd. Significant inter-regional and inter-size differences in metal concentrations in both soft tissues and byssus were recorded. Highly significant correlations (P<0.01, P<0.05) were observed between tissue and byssal concentrations of Cd, Pb, Ni and Ag. Factor analysis showed clear separation of both the tissue and byssi samples based on their geographic distribution, possibly reflecting a different rate of deposition of clay minerals at the head of the Pomeranian Bay and the Gulf of Gdańsk. The Pomeranian Bay differs from the Gulf of Gdańsk in respect to geological structure of bottom sediments as a substrata for the M. edulis trossulus as well as in relation to various sources of metallic pollutants. From the data obtained in the present study and those reported previously the soft tissue and especially byssus of M. edulis, in contrast to shells, appear to be a significantly better bioindicator for identification of coastal areas exposed to metallic contaminants.     

The toxicity of tri-substituted benzenes to the protozoan ciliate Spirostomum ambiguum

The Spirotox test utilises a large ciliate protozoan Spirostomum ambiguum as a test organism. The goal of the present study was to evaluate the toxicity of tri-substituted benzenes in the Spirotox test. Twenty-six organic compounds were tested in this study and included: dimethylphenols (DMPs), dichlorophenols (DCMs), trichlorobenzenes (TCBs), dichloroanilines (DCAs), dinitrophenols (DNPs), dinitroaniline (DNA), dinitrochlorobenzene (DNCB) and dinitrofluorobenzene (DNFB). The toxicity of the compounds tested varied almost four orders of a magnitude. DMPs and DCAs were the least toxic, whereas dinitro derivatives were the most toxic to S. ambiguum. When chlorine or fluorine atoms were replaced by amino or hydroxy substituents, the toxicity increased dramatically. The results of the Spirotox test were compared with three other bioassays that are widely used around the world: Microtox, Tetrahymena pyriformis and Daphnia magna. The Spirotox was less sensitive than these other bioassays for the majority of these compounds, with an exception found for the dinitro derivatives.     

Spatial and temporal variations of PM(2.5) concentration and composition throughout an urban area with high freeway density-the Greater Cincinnati study

The PM(2.5) concentration and its elemental composition were measured in the Cincinnati metropolitan area, which is characterized by intense highway traffic. The spatial and temporal variations were investigated for various chemical elements that contributed to the PM(2.5) fraction during a 1-year-long measurement campaign (December 2001-November 2002). The ambient aerosol monitoring was performed in 11 locations around the city during nine measurement cycles. During each cycle, four Harvard-type impactors were operating in parallel in specific locations to explore various factors affecting the PM(2.5) elemental concentrations. The sampling was performed during business days, thus assuring traffic uniformity. The 24-h PM(2.5) samples were collected on Teflon and quartz filters. Teflon filters were analyzed by X-ray fluorescence (XRF) analysis while quartz filters were analyzed by thermal-optical transmittance (TOT) analysis. In addition to PM(2.5) measurements, particle size-selective sampling was performed in two cycles using micro-orifice uniform deposit impactor; the collected fractionated deposits were analyzed by XRF. It was found that PM(2.5) concentration ranged from 6.70 to 48.3 mug m(-3) and had low spatial variation (median coefficient of variation, CV=11.3%). The elemental concentrations demonstrated high spatial variation, with the median CV ranged from 38.2% for Fe to 68.7% for Ni. For traffic-related trace metals, the highest concentration was detected in the city center site, which was close to a major highway. The particle size selective measurement revealed that mass concentration of the trace metals, such as Zn, Pb, Ni, as well as that of sulfur reach their peak values in the particle size range of 0.32-1.0 mum. Meteorological parameters and traffic intensity were not found to have a significant influence on the PM(2.5) elemental concentrations.     

Particulate matter in California: part 1--Intercomparison of several PM2.5, PM10-2.5, and PM10 monitoring networks

It will be many years before the recently deployed network of fine particulate matter with an aerodynamic diameter less than 2.5 microm (PM2.5) Federal Reference Method (FRM) samplers produces information on nonattainment areas, trends, and source impacts. However, data on PM2.5 and its major constituents have been routinely collected in California for the past 20 years. The California Air Resources Board operated as many as 20 dichotomous (dichot) samplers for PM2.5 and coarse PM (PM10-2.5). The California Acid Deposition Monitoring Program (CADMP) collected 12-h-average PM2.5 and PM10 from 1988 to 1995 at ten urban and rural sites and 24-h-average PM2.5 at five urban sites since 1995. Beginning in 1994, the Children's Health Study collected 2-week averages of PM2.5 in 12 communities in southern California using the Two-Week Sampler (TWS). Comparisons of collocated samples establish relationships between the dichot, CADMP, and TWS samplers and the 82-site network of PM2.5 FRM samplers deployed since 1999 in California. PM mass data from the different monitoring programs have modest to high correlation to FRM mass data, fairly small systematic biases and negative proportional biases ranging from 7 to 22%. If the biases are taken into account, all of the programs should be considered comparable with the FRM program. Thus, historical data can be used to develop long-term PM trends in California.