GLYPHOSATE, OTHER HERBICIDES, AND TRANSFORMATION PRODUCTS IN MIDWESTERN STREAMS, 20021

ABSTRACT: The use of glyphosate has increased rapidly, and there is limited understanding of its environmental fate. The objective of this study was to document the occurrence of glyphosate and the transformation product aminomethylphosphonic acid (AMPA) in Midwestern streams and to compare their occurrence with that of more commonly measured herbicides such as acetochlor, atrazine, and metolachlor. Water samples were collected at sites on 51 streams in nine Midwestern states in 2002 during three runoff events: after the application of pre-emergence herbicides, after the application of post-emergence herbicides, and during harvest season. All samples were analyzed for glyphosate and 20 other herbicides using gas chromatography/mass spectrometry or high performance liquid chromatography/mass spectrometry. The frequency of glyphosate and AMPA detection, range of concentrations in runoff samples, and ratios of AMPA to glyphosate concentrations did not vary throughout the growing season as substantially as for other herbicides like atrazine, probably because of different seasonal use patterns. Glyphosate was detected at or above 0.1 μg/1 in 35 percent of pre-emergence, 40 percent of post-emergence, and 31 percent of harvest season samples, with a maximum concentration of 8.7 μg/1. AMPA was detected at or above 0.1 μg/1 in 53 percent of pre-emergence, 83 percent of post-emergence, and 73 percent of harvest season samples, with a maximum concentration of 3.6 μg/1. Glyphosate was not detected at a concentration at or above the U.S. Environmental Protection Agency's maximum contamination level (MCL) of 700 μg/1 in any sample. Atrazine was detected at or above 0.1 μg/1 in 94 percent of pre-emergence, 96 percent of post-emergence, and 57 percent of harvest season samples, with a maximum concentration of 55 μg/1. Atrazine was detected at or above its MCL (3 μg/1) in 57 percent of pre-emergence and 33 percent of post-emergence samples.     

Preferential adsorption of fluorescing fulvic and humic acid components on activated carbon using flow field-flow fractionation analysis

Activated carbon treatment of drinking water is used to remove natural organic matter (NOM) precursors that lead to the formation of disinfection byproducts. The innate hydrophobic nature and macromolecular size of NOM render it amenable to sorption by activated carbon. Batch equilibrium and minicolumn breakthrough adsorption studies were performed using granular activated carbon to treat NOM-contaminated water. Ultraviolet (UV) absorption spectroscopy and flow field-flow fractionation analysis using tandem diode-array and fluorescence detectors were used to monitor the activated carbon sorption of NOM. Using these techniques, it was possible to study activated carbon adsorption properties of UV absorbing, fluorescing and nonfluorescing, polyelectrolytic macromolecules fractionated from the total macromolecular and nonmacromolecular composition of NOM. Adsorption isotherms were constructed at pH 6 and pH 9. Data were described by the traditional and modified Freundlich models. Activated carbon capacity and adsorbability were compared among fractionated molecular subsets of fulvic and humic acids. Preferential adsorption (or adsorptive fractionation) of polyelectrolytic, fluorescing fulvic and humic macromolecules on activated carbon was observed. The significance of observing preferential adsorption on activated carbon of fluorescing macromolecular components relative to nonfluorescing components is that this phenomenon changes the composition of dissolved organic matter remaining in equilibrium in the aqueous phase relative to the composition that existed in the aqueous phase prior to adsorption. Likewise, it changes the composition of dissolved organic matter remaining in equilibrium in the aqueous phase relative to the adsorbed phase. This research increases our understanding of NOM interactions with activated carbon which may lead to improved methods of potable water production.     

Use and abuse revisited: Response to Pluhar and Varner

In her recent Counter-Reply to my views, Evelyn Pluhar defends her use of literature on nutrition and restates her argument for moral vegetarianism. In his Vegan Ideal article, Gary Varner claims that the nutrition literature does not show sufficient differences among women, men, and children to warrant concern about discrimination. In this response I show how Professor Pluhar continues to draw fallacious inferences: she begs the question on equality, avoids the main issue in my ethical arguments, argues from irrelevancies, misquotes her sources, equivocates on context, confuses safety with morality, appeals to fear, confuses correlation with cause, fails to evaluate scientific studies, draws hasty conclusions from insufficient data, ignores a large amount of data which would call her views into question, does not follow good scientific or moral argumentation, objectionably exceeds the limits of her expertise, and resorts to scapegoating. I also argue that Professor Varner fails to make his case because he offers virtually no evidence from scientific studies on nutrition, relies on outdated and fallacious sources, makes unsupported claims, ignores evidence that would contravene his claims, draws hasty conclusions based on weakly supported hypotheses rather than facts, employs a double standard, appeals to ignorance, does not evaluate arguments from his sources, and makes anad hominem attack on a respected nutritionist when his focus should be on evaluating the evidence and arguments from the scientific studies themselves. Neither Varner nor Pluhar have responded sufficiently to the real issue in my arguments, that of discrimination and bias in the vegan ideal.     

Forward collision warning system impact

Abstract

Objective: The objective of this research is to use historical crash data to evaluate the potential benefits of both high- and low-speed automatic emergency braking (AEB) with forward collision warning (FCW) systems.

Methods: Crash data from the NHTSA’s NASS–General Estimates System (GES) and Fatality Analysis Reporting System (FARS) databases were categorized to classify crashes by the speed environment, as well as to identify cases where FCW systems would be applicable.

Results: Though only about 19% of reported crashes occur in environments with speeds greater than 45?mph, approximately 32% of all serious or fatal crashes occur in environments with speeds greater than 45?mph. The percentage of crashes where FCW systems would be relevant has remained remarkably constant, varying between about 21 and 26% from 2002 to 2015. In 2-vehicle fatal crashes where one rear-ends the other, the fatality rates are actually higher in the struck vehicle (33%) than the striking vehicle (26%). The disparity is even greater when considering size–class differences, such as when a light truck rear-ends a passenger car (15 vs. 42% fatality rates, respectively).

Conclusions: NHTSA and the Insurance Institute for Highway Safety (IIHS) proposed the Automatic Emergency Braking Initiative in 2015, which is intended to make AEB (also called crash-imminent braking) with FCW systems standard on nearly all new cars by September 2022. Twenty automakers representing 99% of the U.S. auto market voluntarily committed to the initiative. Though the commitment to safety is laudable, the AEB component of the agreement only covers low-speed AEB systems, with the test requirements set to 24?mph or optionally as low as 12?mph. The test requirements for the FCW component of the agreement include 2 tests that begin at 45?mph. Only 21% of relevant serious injury or fatal accidents occur in environments at speeds under 24?mph, whereas about 22% of serious or fatal crashes occur in environments with speeds greater than 45?mph. This means that the AEB with FCW systems as agreed upon will cover only 21% of serious or fatal crashes and will not cover 22% of serious or fatal crashes. Because these systems are protective not only for the occupants of the vehicle where they are installed but also other vehicles on the roads, the data indicate that these systems should be a standard feature on all cars for high-speed as well as low-speed environments for the greatest social benefit.     

Leaching and sorption of neonicotinoid insecticides and fungicides from seed coatings

Seed coatings are a treatment used on a variety of crops to improve production and offer protection against pests and fungal outbreaks. The leaching of the active ingredients associated with the seed coatings and the sorption to soil was evaluated under laboratory conditions using commercially available corn and soybean seeds to study the fate and transport of these pesticides under controlled conditions. The active ingredients (AI) included one neonicotinoid insecticide (thiamethoxam) and five fungicides (azoxystrobin, fludioxonil, metalaxyl, sedaxane thiabendazole). An aqueous leaching experiment was conducted with treated corn and soybean seeds. Leaching potential was a function of solubility and seed type. The leaching of fludioxonil, was dependent on seed type with a shorter time to equilibrium on the corn compared to the soybean seeds. Sorption experiments with the treated seeds and a solution of the AIs were conducted using three different soil types. Sorption behavior was a function of soil organic matter as well as seed type. For most AIs, a negative relationship was observed between the aqueous concentration and the log K_oc. Sorption to all soils tested was limited for the hydrophilic pesticides thiamethoxam and metalaxyl. However, partitioning for the more hydrophobic fungicides was dependent on both seed type and soil properties. The mobility of fludioxonil in the sorption experiment varied by seed type indicating that the adjuvants associated with the seed coating could potentially play a role in the environmental fate of fludioxonil. This is the first study to assess, under laboratory conditions, the fate of pesticides associated with seed coatings using commercially available treated seeds. This information can be used to understand how alterations in agricultural practices (e.g., increasing use of seed treatments) can impact the exposure (concentration and duration) and potential effects of these chemicals to aquatic and terrestrial organisms.     

Changes in extreme events and the potential impacts on human health

Extreme weather and climate-related events affect human health by causing death, injury, and illness, as well as having large socioeconomic impacts. Climate change has caused changes in extreme event frequency, intensity, and geographic distribution, and will continue to be a driver for change in the future. Some of these events include heat waves, droughts, wildfires, dust storms, flooding rains, coastal flooding, storm surges, and hurricanes. The pathways connecting extreme events to health outcomes and economic losses can be diverse and complex. The difficulty in predicting these relationships comes from the local societal and environmental factors that affect disease burden. More information is needed about the impacts of climate change on public health and economies to effectively plan for and adapt to climate change. This paper describes some of the ways extreme events are changing and provides examples of the potential impacts on human health and infrastructure. It also identifies key research gaps to be addressed to improve the resilience of public health to extreme events in the future.

Implications: Extreme weather and climate events affect human health by causing death, injury, and illness, as well as having large socioeconomic impacts. Climate change has caused changes in extreme event frequency, intensity, and geographic distribution, and will continue to be a driver for change in the future. Some of these events include heat waves, droughts, wildfires, flooding rains, coastal flooding, surges, and hurricanes. The pathways connecting extreme events to health outcomes and economic losses can be diverse and complex. The difficulty in predicting these relationships comes from the local societal and environmental factors that affect disease burden.     

An integrated decision-support process for adaptation planning: climate change as impetus for scenario planning in an agricultural region of Canada

The amount of information required to adapt to climate change is vast: downscaled climate projections, information on environmental impact, sectoral performance, external drivers, regional strategies, policies and practices. It can be argued that most of this information is accessible at the community/regional level, and thus, the important challenges to adaptation are not information gaps, but constraints created by fragmented planning decisions and a sector-by-sector basis for financial and human resource allocations. To strategically address this through adaptation planning, we developed and tested a place-based decision-making framework that creates an integrated platform for considering regional and global sectoral drivers in Eastern Ontario, Canada. Using available socioeconomic and biophysical information from regional authorities, alternative future scenarios were used to describe the range of socioeconomic futures and their vulnerabilities to climate change. We found that: (1) integration of diverse sets of available data (rather than narrowly focused sectoral assessments) helped identify shared common objectives (maximizing the long-term environmental, economic, social well-being within the region), (2) a high degree of congruence existed as the key drivers of change, irrespective of sector, (3) exploring the future scenarios highlighted shared regional priorities and helped identify adaptation priorities requiring more integrated regional planning.     

Trace-level beryllium analysis in the laboratory and in the field: state of the art, challenges and opportunities

Control of workplace exposure to beryllium is a growing issue in the United States and other nations. As the health risks associated with low-level exposure to beryllium are better understood, the need increases for improved analytical techniques both in the laboratory and in the field. These techniques also require a greater degree of standardization to permit reliable comparison of data obtained from different locations and at different times. Analysis of low-level beryllium samples, in the form of air filters or surface wipes, is frequently required for workplace monitoring or to provide data to support decision-making on implementation of exposure controls. In the United States and the United Kingdom, the current permissible exposure level is 2 microg m(-3) (air) and the United States Department of Energy has implemented an action level of 0.2 microg m(-3) (air) and 0.2 microg/100 cm(2) (surface). These low-level samples present a number of analytical challenges, including (1) a lack of suitable standard reference materials, (2) unknown robustness of sample preparation techniques, (3) interferences during analysis, (4) sensitivity (sufficiently low detection limits), (5) specificity (beryllium speciation) and (6) data comparability among laboratories. Additionally, there is a need for portable, real-time (or near real-time) equipment for beryllium air monitoring and surface wipe analysis that is both laboratory-validated and field-validated in a manner that would be accepted by national and/or international standards organizations. This paper provides a review of the current analytical requirements for trace-level beryllium analysis for worker protection and also addresses issues that may change those requirements. The current analytical state of the art and relevant challenges facing the analytical community will be presented, followed by suggested criteria for real-time monitoring equipment. Recognizing and addressing these challenges will present opportunities for laboratories, research and development organizations, instrument manufacturers and others.