Estimation of 222Rn release from the phosphogypsum board used in housing panels

Phosphogypsum board is a popular construction material used for housing panels in Korea. Phosphogypsum often contains (226)Ra which decays into (222)Rn through an alpha transformation. (222)Rn emanated from the (226)Ra-bearing phosphogypsum board has drawn the public concern due to its potential radiological impacts to indoor occupants. The emanation rate of (222)Rn from the board is estimated in this paper. A mathematical model of the emanation rate of (222)Rn from the board is presented and validated through a series of experiments. The back diffusion effect due to accumulation of (222)Rn-laden air was incorporated in the model and found to have a strong impact on the (222)Rn emanation characteristics.     

反渗透膜在分散型农村饮用水深度处理中开发应用研究

以反渗透膜为主,综合集成超滤、微滤、砂滤、活性碳吸附、紫外线消毒等技术措施．设计安装了适合农村自来水、井水、河水不同饮用水源深度净化处理的3套设备。运行结果表明,设备对于饮用水源中的有机物、微生物、色味臭,以及自来水中的余氯,处理效果非常明显。研究成果为解决分散型农村安全饮用水问题．提供了比较好的技术方案。     

Characteristics of Ion Components and Trace Elements of Fine Particles at Gosan, Korea in Spring time from 2001 to 2002

Size-segregated measurements of the composition of an aerosol are used to determine the transport of natural and anthropogenic aerosols to the Gosan site in springtime from 2001 to 2002. Although the transport of Asian dust is a well-known phenomenon in springtime, this study shows that not only is soil dust transported into Gosan each spring but so are anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Zn, Ni, K, S. This study also combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of the anthropogenic aerosols. Finally, four types of transport episodes were identified: (1) anthropogenic pollutants, (2) dust storm mixed with the anthropogenic aerosols, (3) typical dust storms, (4) some sea salt with clean air mass. Overall, in addition to typical soil dust, a large amount of anthropogenic aerosols, whether mixed with the soil dust or not, are transported to Gosan each spring.     

Practical field application of a novel BOD monitoring system

A biochemical oxygen demand (BOD) monitoring system, based on electrochemically-active bacteria in combination with a microbial fuel cell, has been developed for the purpose of on-site, on-line and real-time monitoring of practical wastewater. A microbial fuel cell that had been enriched with electrochemically-active bacteria was used as the basis of the measurement system. When synthetic wastewater was fed to the system, the current generation pattern and its Coulombic yield were found to be dependent on the BOD5 of the synthetic wastewater. A linear correlation between the Coulombic yields and the BOD5 of the synthetic wastewater were established. Real wastewater obtained from a sewage treatment plant also produced a highly linear correlation between the Coulombic yield and BOD5 in the system. To examine on-site, on-line and real-time monitoring capability, the BOD monitoring system was installed at a sewage treatment plant. Over 60 days, the measurement system was successfully operated with high accuracy and good stability with the measuring period for a sample being 45 min. This application showed that the application of the measurement system was a rapid and practical way for the determination of BOD5 in water industries.     

Competitive adsorption characteristics of Co2+, Ni2+, and Cr3+ by IRN-77 cation exchange resin in synthesized wastewater

Adsorption properties of Co2+, Ni2+, and Cr3+ on an Amberlite IRN-77 cation exchange resin were investigated in batch systems. Levels of adsorption rapidly approached an equilibrium state within 1 h. The adsorption characteristics of each metal onto the resin were accurately represented by Langmuir isotherms. Co2+ and Ni2+, which have an equivalent electrovalence, displayed similar levels of adsorption onto the resin when they coexisted in the solution. However, when Cr3+ was added to the solution it competitively replaced Co2+ and Ni2+ ions that had been previously adsorbed onto the resin, resulting in the desorption of these metals into the solution. The result was likely due to a higher adsorption affinity of Cr3+ relative to Co2+ and Ni2+. This implies that interactively competitive adsorption of multi-cations onto the resin should be thoroughly considered when contemplating the efficient operation of an ion exchange process in the treatment of industrial wastewater.     

Quick vaporization of sprayed sodium hypochlorite (NaClO(aq)) for simultaneous removal of nitrogen oxides (NOx), sulfur dioxide (SO2), and mercury (Hg0)

Sodium hypochlorite (NaClO) has been widely used as a chemical additive for enhancing nitrogen oxide (NO_x; NO + NO₂), sulfur dioxide (SO₂), and mercury (Hg⁰) removals in a wet scrubber. However, they are each uniquely dependent on NaClO_(aq) pH, hence making the simultaneous control difficult. In order to overcome this weakness, we sprayed low liquid-to-gas (L/G) ratio (0.1 L/Nm³) of NaClO_(aq) to vaporize quickly at 165 °C. Results have shown that the maximized NO_x, SO₂, and Hg⁰ removals can be achieved at the pH range between 4.0 and 6.0. When NO_x and Hg⁰ coexist with SO₂, in addition, their removals are significantly enhanced by reactions with solid and gaseous by-products such as NaClO_(s), NaClO_2(s), OClO, ClO, and Cl species, originated from the reaction between SO₂ and NaClO_(aq). We have also demonstrated the feasibility of this approach in the real flue gases of a combustion plant and observed 50%, 80%, and 60% of NO_x, SO₂, and Hg⁰ removals, respectively. These findings led us to conclude that the spray of NaClO_(aq) at a relatively high temperature at which the sprayed solution can vaporize quickly makes the simultaneous control of NO_x, SO₂, and Hg⁰ possible.

Implications: The simple spray of NaClO_(aq) at temperatures above 165 °C can cause the simultaneous removal of gaseous NO_x, SO₂, and Hg⁰ by its quick vaporization. Their maximized removals are achieved at the pH range between 4.0 and 6.0. NO_x and Hg⁰ removals are also enhanced by gaseous and solid intermediate products generated from the reaction of SO₂ with NaClO_(aq). The feasibility of this approach has been demonstrated in the real flue gases of a combustion plant.     

Visibility trends in Korea during the past two decades

Temporal trends and spatial distributions of visibility measured by the human eye over 60 stations in Korea between 1980 and 2000 are analyzed and discussed. Generally, visibility is lowest on winter mornings and highest on summer afternoons throughout Korea. Visibility in Seoul is now in an increasing trend while it has decreased nationwide, especially in clean coastal areas. Spatial distribution of visibility in the 1990s was related negatively to that of relative humidity (RH). However, visibility generally decreased despite an overall decrease in RH throughout the country. Air pollutants should have played a role in this dissonant variation, particularly in relatively clean areas and on summer afternoons. It was interpreted that the visibility increase in major metropolitan areas, including the greater Seoul area, in the 1990s was caused mainly by the reduction in pollutant emissions by rigorous government policy. But the effect of the emission reduction was manifested with decreasing RH.     

Factors affecting oxygen-transfer rates in headspace-gas respirometers.

Satisfactory measures of the biological-oxygen-uptake rate in headspace-gas respirometers can only be achieved if the rate of oxygen transfer from the headspace gas to liquid is greater than the rate of oxygen uptake by microorganisms. In the authors' study, factors potentially affecting oxygen-transfer limitations in headspace-gas respirometers were evaluated quantitatively. Tests were conducted to measure maximum-oxygen-uptake rates by operating a respirometer under various test conditions. Analysis of respirometric data indicated that limiting oxygen-transfer rates were related to mixing intensity, length of magnetic stirring bar, volume of sample, and oxygen content in the headspace gas. A multivariable model was developed to describe the overall contribution of these factors to the limiting oxygen-transfer rate. This model should be useful for estimating maximum-oxygen-transfer rates for essentially all headspace-gas respirometers.     

Adsorption and photocatalytic degradation of bisphenol A using TiO2 and its separation by submerged hollowfiber ultrafiltration membrane

This study evaluates the adsorption ability ofbisphenol A（BPA） on titanium dioxide（TiO2） and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor （capacity 0.16 m^3） was studied using submerged ultrafiltration （UF） membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency ofphotocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.