Decision support methods for the environmental assessment of contamination at mining sites

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a ‘holistic’ approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.     

Analysis of cadmium, nickel, and lead in commercial moist and dry snuff used in Pakistan

The extent to which smokeless tobacco endangers human health is an ongoing subject of debate. In this study, concentrations of toxic metals, cadmium (Cd), lead (Pb), and nickel (Ni), were measured in different snuff products (dry brown and black and moist green and brown), available and consumed in Pakistan. Concentrations of Cd, Pb, and Ni were determined in 23 samples of various brands of snuff by electrothermal atomic absorption spectrometry, after microwave-assisted acid digestion. The reliability of methodology was assured by analyzing certified reference material. The resulted data of toxic metals in different snuff products are comparable to the existing information with limited exceptions. It was estimated that 10 g intake of different types of snuff could contribute 14–68, 17–47, and 20–73 % of the provisional maximum tolerable daily intake for Cd, Ni, and Pb, respectively.     

Levels, distribution, and risk assessment of organochlorines in surficial sediments of the Red Sea coast, Egypt

The analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in surficial sediment samples collected from 17 locations along with the coast of the Red Sea in Egypt were carried out using gas chromatography–mass spectrometry. Several potential organic contaminants from agricultural (e.g., DDT and its breakdown products, lindane, endrin, dieldrin, and endosulfan) and industrial (PCBs) sources were measured. The levels of 20 organochlorine pesticides (OCPs) and ten PCB congeners in sediment collected from 17 stations along ~1,200 km were investigated. Concentrations of PCBs, HCHs, DDTs, and cyclodienes ranged from 0.40 to 6.17, 0.01 to 0.09, n.d. to 0.46, and 0.08 to 0.90 ppb dry weight. Two statistical programs were applied on the data (principal component analysis, PCA, and cluster analysis, CA), and it was concluded that it is impossible to predict the distribution patterns of the OCPs in a contaminated area. Risk assessment of the organochlorines contaminated in the sediments of the studied area was investigated.     

Delineating shallow saline groundwater zones from Southern India using geophysical indicators

A geophysical survey was conducted over an industrial belt encompassing 80 functional leather factories in Southern India. These factories discharge untreated effluents which pollute shallow groundwater where electrical conductivity (EC) value had a wide range between 545 and 26,600 μS/cm (mean, 3, 901 μS/cm). The ranges of Na⁺ and Cl^? ions were from 46 to 4,850 mg/L (mean, 348 mg/L) and 25 to 10,390 mg/L (mean, 1,079 mg/L), respectively. Geoelectrical layer parameters of 37 vertical electrical soundings were analyzed to demarcate fresh and saline water zones. However, the analysis not did lead to a unique resolution of saline and fresh waters. It was difficult to assign a definitive value to the aquifer resistivity of any area. Thus, geophysical indicators, namely longitudinal unit conductance (S), transverse unit resistance (T), and average longitudinal resistivity (R _s), were calculated for identifying fresh and saline waters. Spatial distributions of S, T, and R _s reflected widely varying ranges for the saline and fresh water zones. Further, the empirical relation of formation factor (F) was established from pore-water resistivity and aquifer resistivity for fresh and saline aquifers, which may be used to estimate local EC values from the aquifer resistivity, where well water is not available.     

A pragmatic approach to study the groundwater quality suitability for domestic and agricultural usage,Saq aquifer,northwest of Saudi Arabia

The present study deals with detailed hydrochemical assessment of groundwater within the Saq aquifer. The Saq aquifer which extends through the NW part of Saudi Arabia is one of the major sources of groundwater supply. Groundwater samples were collected from about 295 groundwater wells and analyzed for various physico-chemical parameters such as electrical conductivity (EC), pH, temperature, total dissolved solids (TDS), Na⁺, K⁺, Ca²⁺, Mg²⁺, CO₃ ^?, HCO₃ ^?, Cl^?, SO₄ ^2?, and NO₃ ^?. Groundwater in the area is slightly alkaline and hard in nature. Electrical conductivity (EC) varies between 284 and 9,902?μS/cm with an average value of 1,599.4 μS/cm. The groundwater is highly mineralized with approximately 30 % of the samples having major ion concentrations above the WHO permissible limits. The NO₃ ^? concentration varies between 0.4 and 318.2 mg/l. The depth distribution of NO₃ ^? concentration shows higher concentration at shallow depths with a gradual decrease at deeper depths. As far as drinking water quality criteria are concerned, study shows that about 33 % of samples are unfit for use. A detailed assessment of groundwater quality in relation to agriculture use reveals that 21 % samples are unsuitable for irrigation. Using Piper’s classification, groundwater was classified into five different groups. Majority of the samples show Mix-Cl-SO₄- and Na-Cl-types water. The abundances of Ca²⁺ and Mg²⁺ over alkalis infer mixed type of groundwater facies and reverse exchange reactions. The groundwater has acquired unique chemical characteristics through prolonged rock-water interactions, percolation of irrigation return water, and reactions at vadose zone.     

Diversity of bacterial isolates during full scale rotary drum composting

Bacterial diversity of full scale rotary drum composter from biodegradable organic waste samples were analyzed through two different approaches, i.e., Culture dependent and independent techniques. Culture-dependent enumerations for indigenous population of bacterial isolates mainly total heterotrophic bacteria (Bacillus species, Pseudomonas species and Enterobacter species), Fecal Coliforms, Fecal Streptococci, Escherichia coli, Salmonella species and Shigella species showed reduction during the composting period. On the other hand, Culture-independent method using PCR amplification of specific 16S rRNA sequences identified the presence of Acinetobacter species, Actinobacteria species, Bacillus species, Clostridium species, Hydrogenophaga species, Butyrivibrio species, Pedobacter species, Empedobactor species and Flavobacterium species by sequences clustering in the phylogenetic tree. Furthermore, correlating physico-chemical analysis of samples with bacterial diversity revealed the bacterial communities have undergone changes, possibly linked to the variations in temperature and availability of new metabolic substrates while decomposing organics at different stages of composting.     

Correction to: Municipal wastewater viral pollution in Saudi Arabia: effect of hot climate on COVID-19 disease spreading

Environmental Science and Pollution Research -     

The semiochemically mediated interactions between bacteria and insects

In natural environment, semiochemicals are involved in many interactions between the different trophic levels involving insects, plants and hosts for parasitoids or prey for predators. These volatile compounds act as messengers within or between insect species, inducing particular behaviours, such as the localisation of a source of food, the orientation to an adequate oviposition site, the selection of a suitable breeding site and the localisation of hosts or prey. In this sense, bacteria have been shown to play an important role in the production of volatile compounds which ones act as semiochemicals. This review, focusing on the semiochemically mediated interactions between bacteria and insects, highlights that bacterial semiochemicals act as important messengers for insects. Indeed, in most of the studies reported here, insects respond to specific volatiles emitted by specific bacteria hosted by the insect itself (gut, mouthparts, etc.) or present in the natural environment where the insect evolves. Particularly, bacteria from the families Enterobacteriaceae, Pseudomonaceae and Bacillaceae are involved in many interactions with insects. Because semiochemicals naturally produced by bacteria could be a very interesting option for pest management, advances in this field are discussed in the context of biological control against insect pests.