Observation and characterization of colloids derived from leached cement hydrates

The possibility of colloid generation from cement hydrates in a cementitious repository environment has been investigated through leaching experiments. Pulverized samples of High Flyash and Silica fume-content Cement (HFSC) and 1:9 ordinary portland cement/blast furnace slag (1:9 OPC/BFS) hydrate were leached in low-salinity groundwater at three solid-to-liquid (S/L) mass ratios (1:5, 1:50 and 1:100), and two temperatures (20 and 60 degrees C) for durations of nearly 2 and 8 months. Detailed characterization of colloid populations has been undertaken by TEM coupled with X-ray analysis. In addition, the surface charge and stability behavior of colloids have been investigated. The colloid concentrations in HFSC hydrate leachates generated at 20 and 60 degrees C show similar trends with S/L ratio. The colloid concentrations of leachates with the lower S/L ratio (1:50 and 1:100) are in the range of 10(11)-10(12) particles per liter. The majority of these particles are composed predominantly of Si, Ca, and Al; the mean particle size is less than 100 nm. The lowest colloid concentrations are found in the leachates with the highest S/L ratios, and the colloid populations tend to be dominated by larger particles. HFSC-derived colloid stability is due to a high negative zeta potential at alkaline pH values, combined with a calcium concentration that is below the critical coagulation concentration (CCC) for the colloids. A preliminary interpretation of HFSC-derived colloid stability based on classical DLVO theory provides a semi-quantitative explanation of the dependence of colloid populations on the S/L ratio in the leaching experiments.     

Estrogenic chemicals and estrogenic activity in leachate from municipal waste landfill determined by yeast two-hybrid assay

Estrogenic activity and estrogenic chemicals in landfill leachate were investigated by yeast two-hybrid assay and chemical analysis. Leachate sample extracted by liquid-liquid extraction with dichloromethane at pH 7.0 showed a higher dose-response curve than sample extracted at pH 3.0. or than sample extracted by solid phase extraction at either pH 7.0 or 3.0. The fraction extracted at pH 3.0 specifically inhibited not only growth of yeast but also estrogenic activity in this assay, suggesting that it contained anti-estrogenic chemicals. The greatest contributor to estrogenic activity among the chemicals identified in leachate extract was bisphenol A, with an estimated contribution ratio of 84%. The contribution ratios of 4-nonyl phenol (4-np) and 4-tert-octyl phenol (4-t-op) were estimated at 1.0%, and 0.1%, respectively, while natural estrogens such as 17beta-estradiol or estrone were below detection limit, so that their contribution ratio was estimated at no more than 10%. The estrogenic activity of leachate was decreased by aeration treatment alone after 7 days, and was no longer detected after 22 days. Concentrations of bisphenol A, 4-np and 4-t-op likewise decreased with aeration.     

The mild hydrothermal synthesis of hydrogrossular from coal ash

In this study, an attempt was made to synthesize hydrogrossular, a group of garnet minerals, under hydrothermal conditions at temperatures below 180°C, using coal ash, which is the solid waste from thermal power plants, as a starting material. A single phase corresponding to hydrogrossular was found at around 120°C, and the hydrogrossular coexisted with 11-Å tobermorite above 140°C. The hydrogrossular phase decreased with increasing reaction temperature, while that of 11-Å tobermorite increased concurrently. The physicochemical properties of the hydrogrossular obtained from the hydrothermal synthesis was characterized by X-ray diffraction thermogravimetry/differential thermal, analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray fluorescence spectroscopy. Received: September 4, 2000 / Accepted: March 7, 2001     

Implementing China's circular economy concept at the regional level: a review of progress in Dalian, China

The circular economy (CE) concept was introduced in China to address environmental degradation and resource scarcity associated with rapid economic development. Chosen as a demonstration city, Dalian has implemented the CE strategy as a means of conserving water, materials, energy and land. This paper outlines some of the regional CE initiatives that have been successful to date in Dalian, including those focusing on conserving energy and water resources and others focusing on reduced industrial emissions. The paper details the approach used in implementing the CE concept in Dalian, tracing the foci and goals of the program, and the sectoral approach used to implement a CE. Although Dalian municipality has achieved many successes in implementing a CE, our paper identifies several challenges that, until recently, have held back complete implementation. These include: the lack of incentives for older industries to 'green' their operations, the lack of financial support to expand the CE concept, and a broad-based need for heightened public awareness and participation in CE initiatives. Our paper then identifies several responses by Dalian municipality to overcome these challenges, including pricing and tax reforms that serve as conservation incentives, the provision of financial support for CE promotion through budget reorganization, and the organization of CE training programs. Our paper concludes that, although CE initiatives have been successful in Dalian, more is possible and more is needed before Dalian can be designated a true 'eco-city'. The approach used by Dalian can provide guidance for other Chinese cities, although it is recognized that each city must tailor its own approach for differing contexts and conditions.     

Application of remote sensing techniques toward the role of traditional water bodies with respect to vegetation conditions

Sri Lanka being an agrarian country, the role of water is important for agricultural production. In Sri Lanka, various tank cascade systems, earthen dams and distribution canals have been accepted as few of the most complex ancient traditional water systems of the world. Rainfall, surface water, groundwater and runoff are linked with each other, they have close interactions to land cover classes such as forests and agriculture. The monitoring of vegetation conditions can show subsurface manifestations of groundwater. In this study, an effort to understand the role of traditional water reservoirs and groundwater recharge was made using remote sensing techniques. We have analyzed various vegetation indices such as Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI-2), Soil-Adjusted Vegetation Index (SAVI), tasselled cap transformation analysis (TCA brightness, greenness and wetness) and their relations with the existence of soil, vegetation and water. Result shows that EVI, SAVI, and TCA-based Greenness Index indicates good relationship with the vegetation conditions as compared to other indices. Therefore, these indices could play a crucial role in depicting the interaction between soil, vegetation, and water. However, multi-temporal observations can provide significant results about these interactions more accurately.     

Variations in speciated emissions from spark-ignition and compression-ignition motor vehicles in California's south coast air basin

The U.S. Department of Energy Gasoline/Diesel PM Split Study examined the sources of uncertainties in using an organic compound-based chemical mass balance receptor model to quantify the contributions of spark-ignition (SI) and compression-ignition (CI) engine exhaust to ambient fine particulate matter (PM2.5). This paper presents the chemical composition profiles of SI and CI engine exhaust from the vehicle-testing portion of the study. Chemical analysis of source samples consisted of gravimetric mass, elements, ions, organic carbon (OC), and elemental carbon (EC) by the Interagency Monitoring of Protected Visual Environments (IMPROVE) and Speciation Trends Network (STN) thermal/optical methods, polycyclic aromatic hydrocarbons (PAHs), hopanes, steranes, alkanes, and polar organic compounds. More than half of the mass of carbonaceous particles emitted by heavy-duty diesel trucks was EC (IMPROVE) and emissions from SI vehicles contained predominantly OC. Although total carbon (TC) by the IMPROVE and STN protocols agreed well for all of the samples, the STN/IMPROVE ratios for EC from SI exhaust decreased with decreasing sample loading. SI vehicles, whether low or high emitters, emitted greater amounts of high-molecular-weight particulate PAHs (benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene) than did CI vehicles. Diesel emissions contained higher abundances of two- to four-ring semivolatile PAHs. Diacids were emitted by CI vehicles but are also prevalent in secondary organic aerosols, so they cannot be considered unique tracers. Hopanes and steranes were present in lubricating oil with similar composition for both gasoline and diesel vehicles and were negligible in gasoline or diesel fuels. CI vehicles emitted greater total amounts of hopanes and steranes on a mass per mile basis, but abundances were comparable to SI exhaust normalized to TC emissions within measurement uncertainty. The combustion-produced high-molecular-weight PAHs were found in used gasoline motor oil but not in fresh oil and are negligible in used diesel engine oil. The contributions of lubrication oils to abundances of these PAHs in the exhaust were large in some cases and were variable with the age and consumption rate of the oil. These factors contributed to the observed variations in their abundances to total carbon or PM2.5 among the SI composition profiles.     

Peak to Mean Pollutant Concentration Ratios for Various Terrain and Vegetation Cover

Many of the new particle sizing instruments utilize light scattering principles to detect and size aerosolparticles. The sensitivity of such nstruments is quite good, although extensive light shielding and focusingmethods must be used. A visible He-Ne gas laser cavity with its low gain is very sensitive to disturbances in its optical cavity and so may provide a new particle sizing approach.     

Diurnal and Weekday Variations in the Source Contributions of Ozone Precursors in California’s South Coast Air Basin

Abstract

For at least 30 years, ozone (O₃) levels on weekends in parts of California’s South Coast (Los Angeles) Air Basin (SoCAB) have been as high as or higher than on weekdays, even though ambient levels of O₃ precursors are lower on weekends than on weekdays. A field study was conducted in the Los Angeles area during fall 2000 to test whether proposed relationships between emission sources and ambient nonmethane hydrocarbon (NMHC) and oxides of nitrogen (NO_x) levels can account for observed diurnal and day-of-week variations in the concentration and proportions of precursor pollutants that may affect the efficiency and rate of O₃ formation. The contributions to ambient NMHC by motor vehicle exhaust and evaporative emissions, estimated using chemical mass balance (CMB) receptor modeling, ranged from 65 to 85% with minimal day-of-week variation. Ratios of ambient NO_x associated with black carbon (BC) to NO_x associated with carbon monoxide (CO) were approximately 1.25 ± 0.22 during weekdays and 0.76 ± 0.07 and 0.52 ± 0.07 on Saturday and Sunday, respectively. These results demonstrate that lower NO_x emissions from diesel exhaust can be a major factor causing lower NO_x mixing ratios and higher NMHC/NO_x ratios on weekends. Nonmobile sources showed no significant day-of-week variations in their contributions to NMHC. Greater amounts of gasoline emissions are carried over on Friday and Saturday evenings but are, at most, a minor factor contributing to higher NMHC/NO_x ratios on weekend mornings.     

Comparison of the MOVES2010a,MOBILE6.2, and EMFAC2007 mobile source emission models with on-road traffic tunnel and remote sensing measurements

The Desert Research Institute conducted an on-road mobile source emission study at a traffic tunnel in Van Nuys, California, in August 2010 to measure fleet-averaged, fuel-based emission factors. The study also included remote sensing device (RSD) measurements by the University of Denver of 13,000 vehicles near the tunnel. The tunnel and RSD fleet-averaged emission factors were compared in blind fashion with the corresponding modeled factors calculated by ENVIRON International Corporation using U.S. Environmental Protection Agency's (EPA's) MOVES2010a (Motor Vehicle Emissions Simulator) and MOBILE6.2 mobile source emission models, and California Air Resources Board's (CARB's) EMFAC2007 (EMission FACtors) emission model. With some exceptions, the fleet-averaged tunnel, RSD, and modeled carbon monoxide (CO) and oxide of nitrogen (NO_x) emission factors were in reasonable agreement (±25%). The nonmethane hydrocarbon (NMHC) emission factors (specifically the running evaporative emissions) predicted by MOVES were insensitive to ambient temperature as compared with the tunnel measurements and the MOBILE- and EMFAC-predicted emission factors, resulting in underestimation of the measured NMHC/NO_x ratios at higher ambient temperatures. Although predicted NMHC/NO_x ratios are in good agreement with the measured ratios during cooler sampling periods, the measured NMHC/NO_x ratios are 3.1, 1.7, and 1.4 times higher than those predicted by the MOVES, MOBILE, and EMFAC models, respectively, during high-temperature periods. Although the MOVES NO_x emission factors were generally higher than the measured factors, most differences were not significant considering the variations in the modeled factors using alternative vehicle operating cycles to represent the driving conditions in the tunnel. The three models predicted large differences in NO_x and particle emissions and in the relative contributions of diesel and gasoline vehicles to total NO_x and particulate carbon (TC) emissions in the tunnel.

Implications: Although advances have been made to mobile source emission models over the past two decades, the evidence that mobile source emissions of carbon monoxide and hydrocarbons in urban areas were underestimated by as much as a factor of 2–3 in past inventories underscores the need for on-going verification of emission inventories. Results suggest that there is an overall increase in motor vehicle NMHC emissions on hot days that is not fully accounted for by the emission models. Hot temperatures and concomitant higher ratios of NMHC emissions relative to NO_x both contribute to more rapid and efficient formation of ozone. Also, the ability of EPA's MOVES model to simulate varying vehicle operating modes places increased importance on the choice of operating modes to evaluate project-level emissions.     

Spatio-temporal variations of selected pesticide residues in the Kurose River in Higashi-Hiroshima city,Japan

ABSTRACT

This study investigated spatio-temporal variations of selected pesticide residues in the Kurose River in Higashi-Hiroshima city (Hiroshima Prefecture), Japan. Water samples were collected from the river at seven sites every month for 1 year (March 2016 to February 2017). Pesticide residues were extracted from the samples by a solid phase extraction using Sep Pack C₁₈ cartridges. Once extracted, the samples were analyzed for cyanazine, simetryn, fenarimol, isoprothiolane, and diazinon using a reversed-phase high-performance liquid chromatography ultraviolet visible (HPLC-UV Vis) system. The limits of detection were 3.60, 4.10, 2.80, 6.50, and 7.30 ng L^-1 for cyanazine, simetryn, fenarimol, isoprothiolane, and diazinon, respectively. Good recovery rates (88%–102%), and mean percent relative standard deviation range (1.00%–5.70%) (n = 6) were obtained with a spiking at 0.20 µg L^-1. The maximum concentrations of 282, 391, 60, 1086, and 1194 ng L^-1 were obtained for cyanazine, simetryn, isoprothiolane, fenarimol, and diazinon, respectively. Cyanazine was the most frequently detected pesticide (64% of the samples, n = 84), followed by simetryn (58%), and then diazinon (57%). The highest and lowest pesticide concentrations were measured during the periods May–June, and January–February, respectively. Principal component analysis revealed three principal components in which the pesticides were linked to dissolved organic matter and total suspended solids. The major water quality parameters (electrical conductivity, pH, Na⁺, K⁺, Mg²⁺, Ca²⁺, NH₄⁺, NO₃^?, Cl^?, SO₄^2?, NO₂^?, and temperature) showed no clear trends for these pesticides. The presence of simetryn and isoprothiolane was largely attributed to rice paddy farms, whereas diazinon was associated mostly with vegetable farms and orchards. The diazinon and isoprothiolane patterns were consistent with their use of controlling insects and fungi in the prefecture. The maximum diazinon concentration detected was higher than the human safe level specified by the European Union (100 ng L^-1) in Council Directive 98/83/EC. This is of concern because of the bioconcentration potential of these residues in fish and other marine animals consumed by humans.