Marine aquaculture regulates dissimilatory nitrate reduction processes in a typical semi-enclosed bay of southeastern China

Marine aquaculture in semi-enclosed bays can significantly influence nutrient cycling in coastal ecosystems. However, the impact of marine aquaculture on the dynamics of dissimilatory nitrate reduction processes (DNRPs) and the fate of reactive nitrogen remain poorly understood. In this study, the rates of DNRPs and the abundances of related functional genes were investigated in aquaculture and non-aquaculture areas. The results showed that marine aquaculture significantly increased the denitrification (DNF) and dissimilatory nitrate reduction to ammonium (DNRA) rates and decreased the rate of anaerobic ammonium oxidation (ANA), as compared with non-aquaculture sites. DNF was the dominant pathway contributing to the total nitrate reduction, and its contribution to the total nitrate reduction significantly increased from 66.72% at non-aquaculture sites to 78.50% at aquaculture sites. Marine aquaculture can significantly affect the physicochemical characteristics of sediment and the abundances of related functional genes, leading to variations in the nitrate reduction rates. Although nitrate removal rates increased in the marine aquaculture area, ammonification rates and the nitrogen retention index in the aquaculture areas were 2.19 and 1.24 times, respectively, higher than those at non-aquaculture sites. Net reactive nitrogen retention exceeded nitrogen removal in the aquaculture area, and the retained reactive nitrogen could diffuse with the tidal current to the entire bay, thereby aggravating N pollution in the entire study area. These results show that marine aquaculture is the dominant source of nitrogen pollution in semi-enclosed bays. This study can provide insights into nitrogen pollution control in semi-enclosed bays with well-developed marine aquaculture.     

Identification of close relationship between atmospheric oxidation and ozone formation regimes in a photochemically active region

Understanding ozone (O₃) formation regime is a prerequisite in formulating an effective O₃ pollution control strategy. Photochemical indicator is a simple and direct method in identifying O₃ formation regimes. Most used indicators are derived from observations, whereas the role of atmospheric oxidation is not in consideration, which is the core driver of O₃ formation. Thus, it may impact accuracy in signaling O₃ formation regimes. In this study, an advanced three-dimensional numerical modeling system was used to investigate the relationship between atmospheric oxidation and O₃ formation regimes during a long-lasting O₃ exceedance event in September 2017 over the Pearl River Delta (PRD) of China. We discovered a clear relationship between atmospheric oxidative capacity and O₃ formation regime. Over eastern PRD, O₃ formation was mainly in a NO_x-limited regime when HO₂/OH ratio was higher than 11, while in a VOC-limited regime when the ratio was lower than 9.5. Over central and western PRD, an HO₂/OH ratio higher than 5 and lower than 2 was indicative of NO_x-limited and VOC-limited regime, respectively. Physical contribution, including horizontal transport and vertical transport, may pose uncertainties on the indication of O₃ formation regime by HO₂/OH ratio. In comparison with other commonly used photochemical indicators, HO₂/OH ratio had the best performance in differentiating O₃ formation regimes. This study highlighted the necessities in using an atmospheric oxidative capacity-based indicator to infer O₃ formation regime, and underscored the importance of characterizing behaviors of radicals to gain insight in atmospheric processes leading to O₃ pollution over a photochemically active region.     

Influence of urban morphological parameters on the distribution and diffusion of air pollutants: A case study in China

Air pollution has a serious fallout on human health, and the influences of the different urban morphological characteristics on air pollutants cannot be ignored. In this study, the relationship between urban morphology and air quality (wind speed, CO, and PM_2.5) in residential neighborhoods at the meso-microscale was investigated. The changes in the microclimate and pollutant diffusion distribution in the neighborhood under diverse weather conditions were simulated by Computational Fluid Dynamics (CFD). This study identified five key urban morphological parameters (Building Density, Average Building Height, Standard Deviation of Building Height, Mean Building Volume, and Degree of Enclosure) which significantly impacted the diffusion and distribution of pollutants in the neighborhood. The findings of this study suggested that three specific strategies (e.g. volume of a single building should be reduced, DE should be increased) and one comprehensive strategy (the width and height of the single building should be reduced while the number of single buildings should be increased) could be illustrated as an optimized approach of urban planning to relief the air pollution. The result of the combined effects could provide a reference for mitigating air pollution in sustainable urban environments.     

铝穹顶储罐雷击损伤及燃爆风险研究

针对铝穹顶储罐雷击问题,开展了回击后长持续时间雷电流分量作用下的铝合金板烧蚀损伤试验研究,分析了铝穹顶储罐损伤及油气燃爆风险。结果表明:当直流分量为164 C时,2 mm铝板发生穿孔,铝穹顶储罐存在雷击燃爆风险;当直流分量≤157 C时,未穿孔,背面温度最高为480℃,存在燃爆风险,铝穹顶储罐存在雷击燃爆风险;当直流分量196 C时,4 mm铝板发生穿孔;当直流分量为196 C时,6 mm铝板未发生穿孔,背面温升为125℃,小于205℃,铝穹顶储罐不存在雷击燃爆风险。     

膜生物反应器净化石油化工污水的研究

介绍了将膜生物反应器用于石油化工污水净化的研究，研制了一套实验室规模的好氧分离式膜生物反应器，膜组件为中空纤维超滤膜，生物反应器为活性污泥曝气池。该实验装置对石油化工污水中ＣＯＤ、ＢＯＤ５、ＳＳ、浊度、石油类的去除率分别为７８％－９８％、９６％－９９％、７４％－９９％，９８％－１００％，８７％；出水中ＣＯＤ、ＢＯ５、ＳＳ、浊度、石油类分类为１５．８－６８．６ｍｇ／Ｌ，２．４－７．８ｍｇ／Ｌ、１．２     

Research progress on distribution,sources, identification,toxicity, and biodegradation of microplastics in the ocean,freshwater, and soil environment

• Microplastics are widely found in both aquatic and terrestrial environments. • Cleaning products and discarded plastic waste are primary sources of microplastics. • Microplastics have apparent toxic effects on the growth of fish and soil plants. • Multiple strains of biodegradable microplastics have been isolated. Microplastics (MPs) are distributed in the oceans, freshwater, and soil environment and have become major pollutants. MPs are generally referred to as plastic particles less than 5 mm in diameter. They consist of primary microplastics synthesized in microscopic size manufactured production and secondary microplastics generated by physical and environmental degradation. Plastic particles are long-lived pollutants that are highly resistant to environmental degradation. In this review, the distribution and possible sources of MPs in aquatic and terrestrial environments are described. Moreover, the adverse effects of MPs on natural creatures due to ingestion have been discussed. We also have summarized identification methods based on MPs particle size and chemical bond. To control the pollution of MPs, the biodegradation of MPs under the action of different microbes has also been reviewed in this work. This review will contribute to a better understanding of MPs pollution in the environment, as well as their identification, toxicity, and biodegradation in the ocean, freshwater, and soil, and the assessment and control of microplastics exposure.     

Nonisothermal pyrolysis kinetics of waste printed circuit boards and product characterization using TG–MS

Journal of Material Cycles and Waste Management - With characteristics of high resources, complex composition, and high toxicity, the treatment and disposal of waste printed circuit boards (WPCBs)...     

Calcined Oil Shale Semi-coke for Significantly Improved Performance Alginate-Based Film by Crosslinking with Ca2+

Journal of Polymers and the Environment - Oil shale semi-coke (OSSC) is the residual solid waste after refining of oil shale, which principally contains organic matter and minerals. The common...     

Diethylenetriaminepentaacetic Acid (DPTA)-modified Magnetic Cellulose Nanocrystals can Efficiently Remove Pb(II) from Aqueous Solution

Journal of Polymers and the Environment - Surface modification of cellulose nanocrystals (CNC) is essential for improving their reactivity and adsorption capacity. Oxidation, as a conventional...     

Evidence for the involvement of Fe(IV) in water treatment by Fe(III)-activated sulfite

Water contamination by emerging organic pollutants is calling for advanced methods of remediation such as iron-activated sulfite-based advanced oxidation. Sulfate radical, SO₄^??, and hydroxyl radical, ^?OH, are the primary reactive intermediates formed in the Fe(III)/sulfite system, yet the possible involvement of Fe(IV) produced from Fe(II) and persulfates is unclear. Here we explored the role of Fe(IV) in the Fe(III)/sulfite system by methyl phenyl sulfoxide (PMSO) probe assay, electron paramagnetic resonance spectra analysis, alcohol scavenging experiment, and kinetic simulation. Results show that PMSO is partially transformed into methyl phenyl sulfone (PMSO₂), thus evidencing Fe(IV) formation. The remaining degradation of PMSO is due to SO₄^?? and ^?OH. The contribution of Fe(IV) versus free radicals is progressively promoted when the Fe(III)-sulfite reaction proceeds, with an upper limit of 80–90%. The contribution of Fe(IV) versus free radicals increases with Fe(III) and sulfite dosages, and decreases with increasing pH. Overall, our findings demonstrate the involvement of Fe(IV) in the Fe-catalyzed sulfite auto-oxidation process.