An antibiotic composite electrode for improving the sensitivity of electrochemically active biofilm biosensor

• Antibiotic azithromycin employed in graphite electrode for EAB biosensor. • Azithromycin at 0.5% dosage increased the sensitivity for toxic formaldehyde. • Azithromycin increased the relative abundance of Geobacter. • Azithromycin regulated thickness of electroactive biofilm. Extensive research has been carried out for improved sensitivity of electroactive biofilm-based sensor (EAB-sensor), which is recognized as a useful tool in water quality early-warning. Antibiotic that is employed widely to treat infection has been proved feasible in this study to regulate the EAB and to increase the EAB-biosensor’s sensitivity. A novel composite electrode was prepared using azithromycin (AZM) and graphite powder (GP), namely AZM@GP electrode, and was employed as the anode in EAB-biosensor. Different dosages of AZM, i.e., 2 mg, 4 mg, and 8 mg, referred to as 0.25%, 0.5% and 1% AZM@GP were under examination. Results showed that EAB-biosensor was greatly benefited from appropriate dosage of AZM (0.5% AZM@GP) with reduced start-up time period, comparatively higher voltage output, more readable electrical signal and increased inhibition rate (30%-65% higher than control sensor with GP electrode) when exposing to toxic formaldehyde. This may be attributed to the fact that AZM inhibited the growth of non-EAM without much influence on the physiologic or metabolism activities of EAM under proper dosage. Further investigation of the biofilm morphology and microbial community analysis suggested that the biofilm formation was optimized with reduced thickness and enriched Geobacter with 0.5% AZM@GP dosage. This novel electrode is easily fabricated and equipped, and therefore would be a promising way to facilitate the practical application of EAB-sensors.     

High performance of multi-layered alternating Ni–Fe–P and Co–P films for hydrogen evolution

Judiciously engineering the electrocatalysts is attractive and challenging to exploit materials with high electrocatalytic performance for hydrogen evolution reaction. Herein, we successfully perform the interface engineering by alternately depositing Co–P and Ni–Fe–P films on nickel foam, via facile electroless plating and de-alloying process. This work shows that there is a significant effect of de-alloying process on alloy growth. The electronic structure of layered alloys is improved by interface engineering. The multilayer strategy significantly promotes the charge transfer. Importantly, the Co–P/Ni–Fe–P/NF electrode fabricated by interface engineering exhibits excellent electrocatalytic hydrogen evolution activity with an overpotential of 43.4 mV at 10 mA cm-2 and long-term durability for 72 h in alkaline medium (1 mol L-1 KOH). The innovative strategy of this work may aid further development of commercial electrocatalysts.     

Alkyl polyglycosides enhanced the dark fermentation of excess sludge and plant waste to produce hydrogen: performance and mechanism

Environmental Science and Pollution Research - Alkyl polyglycosides (APG), a biodegradable biosurfactant, have been widely used in environmental pollution control. However, the application of APG...     

Assessing economic sustainability and ecological efficiency with genuine progress indicator: a case study of the Yangtze River Delta from 2000 to 2018

To achieve urban sustainability, it is critical to enhance the environment, economy, and society simultaneously. This study adopted the revised genuine progress indicator (GPI) and ecological footprint (EF) to evaluate the ecological efficiency and economic sustainability of the Yangtze River Delta from 2000 to 2018. Spatial analysis was utilized to identify spatial autocorrelation. A total of 27 cities were then partitioned through k-means cluster analysis. The results showed that GPI and ecological efficiency improved rapidly, but economic sustainability showed a downward trend. GPI and GDP had a high degree of spatial correlation, especially in Suzhou-Wuxi-Changzhou Metropolitan Area. However, no spatial correlation existed between GPI and EF. The city with high GEE can reach 3000 $/gha, indicating the city consumed 1 global hectare to create $3000 of genuine economic growth. Shanghai, Hangzhou, and Taizhou were cities with the highest level of economic sustainability and ecological efficiency. The spatiotemporal characteristics of economic sustainability and ecological efficiency revealed in this study will provide theoretical guidance for alleviating ecological pressure and promoting economic sustainable development.

     

Numerical modeling of changes in groundwater storage and nitrate load in the unconfined aquifer near a river receiving reclaimed water

Environmental Science and Pollution Research - Reclaimed water (RW) has been widely used as an alternative water resource to recharge rivers in mega-city Beijing. At the same time, the RW also...     

DSCAM-AS1 promotes cervical carcinoma cell proliferation and invasion via sponging miR-338-3p

Environmental Science and Pollution Research - Deregulated lncRNA DSCAM-AS1 expression was found in several tumors. However, mechanism and functional role of DSCAM-AS1 in cervical carcinoma remain...     

Synergistic effects of gaseous pollutants on hospital admissions for cardiovascular disease in Liuzhou,China

Previous studies demonstrated that short-term exposure to gaseous pollutants (nitrogen dioxide (NO₂), sulfur dioxide (SO₂), and ozone (O₃)) had a greater adverse effect on cardiovascular disease. However, little evidence exists regarding the synergy between gaseous pollutants and cardiovascular disease (CVD). Therefore, we aimed to estimate the effect of individual gaseous pollutants on hospital admissions for CVD and to explore the possible synergistic effects between gaseous pollutants. Daily hospitalization counts for CVD were collected from January 1, 2014, to December 31, 2015. We also collected daily time series on gaseous pollutants from the Environment of the People’s Republic of China, including NO₂, SO₂, and O₃. We used distributed lag nonlinear models (DLNMs) to assess the association of individual gaseous pollutants on CVD hospitalization, after controlling for seasonality, day of the week, public holidays, and weather variables. Then, we explored the variability across age and sex groups. In addition, we analyzed the synergistic effects between gaseous pollutants on CVD. Extremely low NO₂ and SO₂ increase the risk of CVD in all subgroup at lag 7 days. The greatest effect of high concentration of SO₂ was observed in male and the elderly (≥ 65 years) at lag 3 days. Greater effects of high concentration of O₃ were more pronounced in the young (< 65 years) and female at lag 3 days, while the effect of low concentration of O₃ was greater in male and the young (< 65 years) at lag 0 day. We found a synergistic effect between NO₂ and SO₂ for CVD, as well as between SO₂ and O₃. The synergistic effects of NO₂ and SO₂ on CVD were stronger in the elderly (≥ 65) and female. The female was sensitive to synergistic effects of SO₂-O₃ and NO₂-O₃. Interestingly, we found that there was a risk of CVD in the susceptible population even for gaseous pollutant concentrations below the National Environmental Quality Standard. The synergy between NO₂ and SO₂ was significantly associated with cardiovascular disease hospitalization in the elderly (≥ 65). This study provides evidence for the synergistic effect of gaseous pollutants on hospital admissions for cardiovascular disease.

     

Direct degradation of methylene blue by unactivated peroxymonosulfate: reaction parameters,kinetics, and mechanism

Environmental Science and Pollution Research - Advanced oxidation processes (AOPs) are efficient methods for water purification. However, there are few studies on using peroxymonosulfate (PMS) to...     

Human health risk assessment of heavy metals from PM2.5 in China’s 29 provincial capital cities

Environmental Science and Pollution Research - After years of governance, China’s PM2.5 pollution has improved significantly, but some problems remain. PM2.5 is the carrier of many heavy...     

Influence of different inoculation densities of black soldier fly larvae (Hermetia illucens) on heavy metal immobilization in swine manure

The disposal of organic waste by the biocomposting of black soldier fly larvae (BSFL) has drawn broad attention. However, the discrepancies in heavy metal immobilization between BSFL biocomposting with different inoculation densities and aerobic composting need to be further researched. In this study, BSFL with inoculation densities of 0.08%, 0.24% and 0.40% was added to swine manure to investigate its influence on heavy metal bioaccumulation and bioavailability. The physicochemical properties, BSFL growth performance and amino acid contents were measured. The results showed that the germination index, total prepupal yield and bioavailable fraction removal rate (%) of Cr and Pb at an inoculation density of 0.40% of BSFL were the highest among all of the BSFL biocomposting groups. Although the bioaccumulation factor and heavy metal (Cd, Cr, Cu and Zn) concentrations of the BSFL body from swine manure with inoculation densities of 0.24% and 0.40% of BSFL were similar, the BSFL inoculation density of 0.40% had the best absorption effect on these heavy metals in terms of total prepupal yield. Therefore, this study provides a basis for exploring the optimal inoculation density of BSFL biocomposting to reduce the harmful effects of heavy metals in swine manure.