中国生态环境监测40年改革发展与成效

改革开放40年来,我国生态环境监测事业从无到有、从小到大、从弱到强,生态环境监测管理体系、网络体系、业务体系和技术体系逐步建立与健全,陆海统筹、天地一体、上下联动、信息共享的生态环境监测体系初步形成,为生态文明建设和环境管理提供了有力的支撑。本文对生态环境监测发展的主要进展、成效与经验进行了梳理和总结,并根据当前面临的机遇与挑战,提出了未来生态环境监测的发展方向。     

煤中氟化物在燃烧产物中的分布特征

通过煤的灰化程序研究煤中氟在燃烧产物中的静态分布特征,并对不同燃烧方式的工业和电站锅炉燃烧时煤中氟化物在燃烧产物中的分布特征进行试验结果表明:煤中氟属于强挥发性元素,在煤灰中是非浓集的.煤粉炉燃煤过程中,煤中氟析出强度高,约有94.5%的氟以气态氟形式析出;层燃炉气态氟的析出率略有降低,约有80%的氟以气态氟形式析出.煤粉炉飞灰各级分粒子中氟元素的质量分数分布呈"单峰"型,峰值出现在74～104μm粒度级,约占飞灰总氟量的55%～60%.     

新发展阶段生态环境监测面临的若干问题和解决思路

“十四五”时期是我国全面建成小康社会、实现第一个百年奋斗目标之后,乘势而上开启全面建设社会主义现代化国家新征程、向第二个百年奋斗目标进军的第一个五年,我国将进入新发展阶段。通过研究新发展阶段需求,分析生态环境监测存在的问题和短板,指出在职能转变、“减污降碳”、“真、准、全”等方面距离深入治污攻坚要求存在的差距,并以新发展理念为指导,研究提出生态环境监测体系与监测能力现代化建设的内涵实质、重要基础以及关键突破口,为加快构建生态环境监测新发展格局提供参考。     

Distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans in ambient air of different regions in China

Levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in fourteen ambient air samples collected in twelve cities of five provinces and one large municipality in China. The PCDD/F concentrations varied from 2.6 to 120 pg m⁻³ (or from 0.04 to 1.93 pg I-TEQ m⁻³). Generally, TCDF was the dominant homologue group and as a rule the homologue concentration of PCDF decreased with rising chlorine substitution number of PCDF. In all cases 2,3,4,7,8-PeCDF was the most important contributor to the I-TEQ value, accounting for 35–57% of the total I-TEQ value. Higher PCDD/F levels in ambient air were found during winter. The highest PCDD/F levels were found in Chengdu, Sichuan Province. In general, the PCDD/F levels in this study were in the same range as in other studies in China.     

Biosorption of lead(II) in aqueous solution by spent mushroom Tricholoma lobayense

The biosorption of lead(II) ions in both simulated and real wastewater by spent mushroom Tricholoma lobayense, was studied in this work. The results show a biomass with a high potential for removing lead ions from wastewater. The optimum pH for the adsorption is 4, and the adsorption process is fast. The best sorbent mass of the biomaterial is 5 g/L with an initial lead(II) concentration of 1 mmol/L. The process follows the Langmuir isotherm model, and the biosorption capacity of lead ions reaches to 210 mg/g, which is higher than many biosorbents previously studied. The mechanism of biosorption may be mainly attributed to ion exchange. The FT-IR study identifies the functional groups responsible for this process. A scanning electron microscope showed a significant change of the sorbent surface after the biosorption process. The energy dispersive elemental analysis also confirmed the adsorption of lead(II) ions.     

关于环境监测社会化的调查与思考

环境监测社会化在我国还处于探索阶段,社会化的根本目的是有序引入社会力量共同参与,提供更多、更好的监测服务。为此,环境监测社会化应坚持政府主导、社会参与的总体格局,引导环保监测机构重点强化环境监测网络运行管理、技术标准研发制定、监督性或执法性监测、环境质量预报预警及污染事故应急监测、监测数据质量控制及汇总分析等职能,同时因地制宜地确定环境监测社会化区域策略,严格规范社会检测的行为,确保监测市场有序开放、公平竞争、风险可控。     

Research on low emission MSW gasification and melting system

In order to eliminate secondary pollution caused by municipal solid waste (MSW) incineration, a MSW gasification and melting process is proposed. The process is expected to reduce the emission of pollutants, especially heavy-metals and dioxins. In this paper, the combustible components of MSW and simulated MSW were gasified in a lab-scale fluidized bed at 400°C–700°C when the excess air ratio (ER) was between 0.2 and 0.8. The experimental results indicated that the MSW could be gasified effectively in a fluidized bed at approximately 600°C–700°C when excess air ratio was 0.2–0.4. The melting characteristics of two typical fly ash samples from MSW incinerators were investigated. The results indicated that fly ash of pure MSW incineration could be melted at approximately 1,300°C and that of MSW and coal co-combustion could be melted at approximately 1,400°C. When temperature was over 1,100°C, more than 99.9% of the dioxins could be decomposed and most of the heavy-metals could be solidified in the slag. Based on the above experiments, two feasible MSW gasification and melting processes were proposed for low calorific value MSW: (1) sieved MSW gasification and melting system, which was based on an idea of multi-recycle; (2) gasification and melting scheme of MSW adding coal as assistant fuel. __________ Translated from Environmental Science, 2006, 27(1): 69–73 [译自: 环境科学]     

萃取在含盐有机废水焚烧处理中的应用

提出并研究了萃取-焚烧工艺在蒸发残液焚烧处理中的应用.以乙酸乙酯为萃取剂,水油体积比为5时,将含30 g·L-1氯化钠、1 g·L-1对硝基苯酚的模拟废水剧烈振荡1min,静置10 min后进行萃取,一级萃取效率和二级萃取效率分别为97.12%和99.89%.随着水油比的升高,一级萃取效率和二级萃取效率都有所下降,但是经过二级萃取之后,有机物的萃取率均在99.00%以上.废水中的氯化钠对萃取效率有提高作用,当氯化钠浓度从60g·L-1升高到200 g·L-1时,一级萃取效率和二级萃取效率分别从94.76%和99.82%上升到97.53%和99.92%.正辛醇的萃取效率较乙酸乙酯低.经过萃取脱盐的有机相,蒸发回收有机溶剂后得到有机物残渣,有机物残渣与有机废水蒸汽一起进入流化床焚烧炉进行焚烧处理;当焚烧炉的温度从700℃提高到850℃时,有机废水蒸汽单独焚烧的焚烧效率从86.34%上升到99.96%,而有机废水蒸汽和有机残渣混合焚烧时的焚烧效率则从90.16%上升到99.99%.     

煤中挥发氮析出过程模拟:不同热解模型的影响

采用数值模型研究了煤热解、燃烧过程中挥发分氮的析出、中间含氮产物HCN的生成以及转变为NO的过程．分别采用双方程模型和通用模型描述热解过程，利用有限体积方法对质量、化学组分、动量和热量守恒方程进行离散求解．计算结果表明两种模型获得的热解过程、孔隙率、HCN生成率等方面存在一定差别，而对颗粒着火时间、NO生成率等方面比较接近．与试验结果比较，采用双方程模型对模拟烟煤颗粒的挥发氮析出过程准确度相对较高．     

城市生活垃圾典型组分的热解动力学模型研究

对城市生活垃圾中的典型组分进行热重特性试验，根据热失重曲线得出了反应力学参数及反应速率控制方程，进而提出了一个通用的反应速率函数式，提出热解指数这个指标来表征垃圾的热解特性。结果表明：１．垃圾组分中，塑料、橡胶、植物类厨余热解符合三段模型，其余组分符合二段热解模型，在不同的温度范围内，热解的反应机理是不同的，且反应动力学参数也不相同。２．同一种组分，影响其反应速率的主要因素是反应动力学常数，升温速