Measurements of fog water interception by shrubs on the California central coast

Fog water deposition may be an important component of the water budget of herbaceous-shrub ecosystems on the central and southern coastal regions of California. This paper presents the first analysis of measured fog water drip rates and meteorological controls in shrublands of Big Sur, California. Seasonal totals of 1255 mm and 306 mm of fog water drip were recorded in 2014 and 2015 (respectively), for averaged fog deposition rates of 0.02–0.08 l m² hr.^?1 to the soil under shrub canopy cover. The diurnal patterns of fog water drip showed that the majority of all trough water collected under shrubs on no-rain days occurred between the hours of 11 PM and 9 AM. During the study period from June 1 to October 31 of both 2014 and 2015, soil water content decreased significantly from average levels of 4–6 % at the shrub canopy center and middle locations, through 2–3 % VWC at the shrub edge locations, to levels at or below 2 % at 2-m distance locations from the shrub edge in open grass cover. Based on these results, we conclude that detectable rates of shrub canopy fog interception help sustain elevated soil water levels under shrubs and aid woody vegetation survival through periods of low rainfall.     

Removal of Eu3+, Ce3+, Sr2+, and Cs+ ions from radioactive waste solutions by modified activated carbon prepared from coconut shells

As a biomass agricultural waste material, coconut shells were used for the preparation of high-quality modified activated carbon. Chemical modification of the surface of the prepared activated carbon is done by oxidation using H₂O₂ and HNO₃, respectively. The surface area and pore volume of the coconut shells activated carbon are increased by the chemical modification, and followingly the removal of the metals is improved. The structural morphology and composition of the modified activated carbon coconut shells (MACCS) were evaluated by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis–differential thermal analysis (TGA-DTA), scanning electron microscope (SEM), X-ray diffraction (XRD), surface area analysis (SAA), X-ray fluorescence (XRF), and carbon, hydrogen, nitrogen, and sulfur (CHNS) elemental analysis. The prepared MACCS has reasonably good chemical stability. The influence of solution pH, contact time, adsorbent dosage, adsorption temperature, initial metal concentrations, and interfering ions on the adsorption performance of the investigated ions onto the prepared sorbent was examined by a batch method. The selectivity sequence for sorption of Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions on MACCS was found to be Eu^3+?>?Ce^3+?>?Sr^2+?>?Cs⁺. The saturation capacities of MACCS for the studied metal ions were found to be 136.84, 85.55, 69.85, and 60.00?mg?g^?1 for Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions, respectively. The thermodynamic parameters, ΔH°, ΔS°, and ΔG° were also evaluated.     

Evidences of different salinization sources in the roman coastal aquifer (Central Italy)

The coastal aquifer of Rome is hosted in the Tiber River Delta depositional sequence, in a densely populated area, which was reclaimed at the end of the 19th century. Moderate salinization processes characterize this aquifer. Hydrogeological and hydrochemical surveys were carried out in October 2012 and February 2013 in the southern sector of the Delta. Hydrogeological surveys updated knowledge of groundwater morphology and a detailed conceptual hydrogeological model of the coastal aquifer was realized. Hydrochemical analyses helped to identify the salinization spatial distribution and to specify the main groundwater types. The most salinized water was not detected close to the coastline, where seawater intrusion processes would be expected, but in the inner areas. Moreover, the salinization processes resulted to be slightly marked. Results so far suggest that the source of salinization may be related more to a combination of land use and historical development of the Tiber River Delta, rather than to seawater.     

HCHs and DDTs in Yellow River of Henan section—a typical agricultural area in China: levels,distributions and risks

The levels, potential sources and ecological risks of hexachlorocyclohexanes (HCHs) and dichlorodiphenyltrichloroethanes (DDTs) in Yellow River of Henan section, a typical agricultural area in China, were investigated. Surface water samples and suspended particulate matters (SPMs) were collected from 23 sites during two seasons. In wet season, the residues of ∑HCHs (α-HCH, β-HCH, γ-HCH and δ-HCH) and ∑DDTs (p,p′-DDT, o,p′-DDT, p,p′-DDE, p,p′-DDD) ranged from 41.7 to 290 and 4.42 to 269 ng/L in surface water, while those varied from 0.86 to 157 and 1.79 to 96.1 ng/g dw in SPM, respectively. Moreover, in surface water, the levels of HCHs and DDTs in wet season were much higher than those in dry season. The reverse was true for residues of HCHs and DDTs in SPM. Compared with the large rivers in other regions, the levels of HCHs and DDTs in the studied area ranked at high levels and the residual concentrations might cause adverse biological risk, especially for ∑HCHs during wet season. Distributions of HCHs and DDTs delineated that the input of tributaries made a significant effect on the residue of HCHs and DDTs in the mainstream. ∑HCHs in surface water were consist of 26.7 % α-HCH, 30.0 % β-HCH, 37.9 % γ-HCH and 5.45 % δ-HCH and those in SPM contained 5.16 % α-HCH, 22.1 % β-HCH, 60.5 % γ-HCH and 12.2 % δ-HCH on average. Combined with ratios of α-HCH/γ-HCH in surface water (0.70) and in SPM (0.09), the results strongly indicated that lindane was recently used or discharged in the studied area. The mean percentage of DDTs′ isomers were 28.7 % p,p′-DDT, 29.8 % o,p′-DDT, 28.1 % p,p′-DDE and 13.4 % p,p′-DDD in surface water, while those were 12.5 % p,p′-DDT, 31.8 % o,p′-DDT, 30.5 % p,p′-DDE and 25.1 % p,p′-DDD in SPM. The ratios of (DDE + DDD)/∑DDTs and o,p′-DDT/p,p′-DDT revealed that the DDTs in the studied area mainly derived from long-term weathering of technical DDTs residue and the input of dicofol.     

A review of combinations of electrokinetic applications

Anthropogenic activities contaminate many lands and underground waters with dangerous materials. Although polluted soils occupy small parts of the land, the risk they pose to plants, animals, humans, and groundwater is too high. Remediation technologies have been used for many years in order to mitigate pollution or remove pollutants from soils. However, there are some deficiencies in the remediation in complex site conditions such as low permeability and complex composition of some clays or heterogeneous subsurface conditions. Electrokinetic is an effective method in which electrodes are embedded in polluted soil, usually vertically but in some cases horizontally, and a low direct current voltage gradient is applied between the electrodes. The electric gradient initiates movement of contaminants by electromigration (charged chemical movement), electro-osmosis (movement of fluid), electrolysis (chemical reactions due to the electric field), and diffusion. However, sites that are contaminated with heavy metals or mixed contaminants (e.g. a combination of organic compounds with heavy metals and/or radionuclides) are difficult to remediate. There is no technology that can achieve the best results, but combining electrokinetic with other remediation methods, such as bioremediation and geosynthetics, promises to be the most effective method so far. This review focuses on the factors that affect electrokinetic remediation and the state-of-the-art methods that can be combined with electrokinetic.     

Using regression models to evaluate the formation of trihalomethanes and haloacetonitriles via chlorination of source water with low SUVA values in the Yangtze River Delta region,China

The purpose of this study was to develop the multiple regression models to evaluate the formation of trihalomethanes (THMs) and haloacetonitriles (HANs) during chlorination of source water with low specific ultraviolet absorbance (SUVA) in Yangtze River Delta, China. The results showed that the regression models of THMs exhibited good accuracy and precision, and 86–97 % of the calculated values fell within ±25 % of the measured values. While the HANs models showed relatively weak evaluation ability, as only 75–83 % of the calculated values were within ±25 % of the measured values. The organic matter [dissolved organic carbon (DOC) or UV absorbance at 254 nm] and bromide exerted the most important influence on the formation of HANs. While for THMs, besides the organic matter and bromide, reaction time was also a key factor. Comparing the models for total THMs (T-THMs) in this study with others revealed that the regression models from the low SUVA waters may have low DOC coefficients, but high bromide coefficients as compared with those from the high SUVA waters.     

Attraction of the potential biocontrol agent <Emphasis Type="Italic">Galerucella placida</Emphasis> (Coleoptera: Chrysomelidae) to the volatiles of <Emphasis Type="Italic">Polygonum orientale</Emphasis> (Polygonaceae) weed leaves

Galerucella placida Baly (Coleoptera: Chrysomelidae) is a potential biocontrol agent of the rice-field weed Polygonum orientale L. (Polygonaceae). The volatile organic compound (VOC) profiles from undamaged and mechanically damaged plants, and from plants 12- and 36-h following continuous feeding of female G. placida adults and 2nd instar larvae were identified and quantified by GC–MS and GC-FID analyses. Twenty-four and 21 compounds were identified in volatiles of undamaged and insect feeding plants, respectively; whereas 22 compounds were detected in volatiles of mechanically damaged plants. Decanal and 1-dodecanol were unique to undamaged plants, and linalool was detected in volatiles of undamaged and mechanically damaged plants, but not in volatiles of insect damaged plants. However, the beetles are not attracted by none of these volatile components, when tested individually in Y-shaped glass tube olfactometer bioassays. In all plants, methyl jasmonate was predominant. 1-Undecanol was the least amount in undamaged plants, and plants 12-h after feeding by G. placida adults and larvae; whereas 1-tridecanol was the least abundant in plants 36-h after feeding by G. placida adults and larvae, and mechanically damaged plants. The beetles showed significant preference to the whole volatile blends from plants 12-h after feeding by larvae and plants 36-h after feeding by either larvae or adults compared to those of undamaged plants. Further, G. placida responded to individual synthetic compounds, 3-hexanol, 1-octen-3-ol, nonanal, and geraniol at 7, 1.38, 3.75 and 4.5 µg/25 µL CH₂Cl₂, respectively, and provide a basis for attraction of the potential biocontrol agent in the field.     

Identification of a floral-derived kairomone for currant clearwing, <Emphasis Type="Italic">Synanthedon tipuliformis</Emphasis>

The currant clearwing Synanthedon tipuliformis (Clerck) (Sesiidae) is a worldwide pest of black currants, Ribes nigrum. This moth has been observed to feed on nectar of inflorescences of Canada thistles, Cirsium arvense (L.) Scop. This work was undertaken to identify floral compound(s) produced by Canada thistles inflorescences that mediate the response of the currant clearwing. Floral volatiles were collected during the day and analysed by coupled gas chromatography/electroantennographic detection (GC/EAD) and gas chromatography/mass spectrometry (GC/MS). Three compounds consistently elicited EAD response from moth antennae and were identified by GC/MS as phenylacetaldehyde, methyl salicylate and dimethyl salicylate. When the compounds were tested individually or in various combinations in field trapping experiments, a 3-component blend attracted the largest number of female and male currant clearwings. Subsequent field trapping experiments were conducted to determine the optimal attraction dose for the ternary blend using three loadings of 1, 10 and 100 mg loaded into a polyethylene sachet. The highest catches were in traps baited with the 100 mg loading. In all trials, males and mated females were caught in significant numbers, while very low numbers of virgin females were found in the traps. In recent years the efficacy of mating disruption against currant clearwing has been reported as declining. The new kairomone blend identified in this study can be used with the sex pheromone to provide an effective control option for this important pest.     

Chemical composition of Eurasian lynx urine conveys information on reproductive state,individual identity,and urine age

In mammals, the chemical profiles of individuals are complex and variable mixtures, and animals perceive information based on variation in the overall quality of these mixtures. A variety of compounds potentially involved in chemical communication have been characterized in the urine of different felid species, but little is known about the information content of felid scent marks. In this study, we investigated whether chemical composition of Eurasian lynx Lynx lynx urine was related to sex, reproductive state, and individual identity. We further analysed if elemental sulphur in lynx urine could serve as a dietary cue or as an indicator for the freshness of a scent mark. We collected urine from captive and wild Eurasian lynx, and analysed volatile constituents of urine by means of solid phase microextraction and gas chromatography-mass spectrometry. Our results show that lynx scent profiles contain sex-specific information on reproductive state, as well as individual identity cues. Urine marks are, therefore, well-suited to fulfil a role in reproductive behaviour and social organisation of wild lynx populations. Relative sulphur content was unrelated to time since last feeding, but decreased with age of the urine sample. The influence of diet and body condition on scent profiles should be further investigated by means of experimental studies, and may shed more light on the messages encoded in carnivore scent-marks.