The role of ammonia on mercury leaching from coal fly ash

The Federal Clean Air Interstate Rule issued in March 2005 will result in many power plants employing ammonia-based technologies to control NO(x) emission. The Clean Air Mercury Rule, issued at the same time, will encourage many power plants to use various technologies to remove mercury from flue gas, generating fly ashes that contain elevated concentrations of mercury. Ammonia forms relatively strong complexes with mercury compared to most other cationic elements and, therefore, may change the leaching characteristics of mercury. Understanding the impact of ammonia on the leaching of mercury from fly ash is critical in predicting the potential environmental impact of future fly ash. Batch methods were used to investigate the ammonia impact on mercury leaching from fly ash under different pH conditions. The results indicated that mercury leaching without external ammonia addition is not significant. However, ammonia addition increased mercury leaching in the alkaline pH range, due to the formation of less adsorbable mercury-ammonia complexes. Washed ash released more mercury than the raw ash if the ammonia concentration is the same, mainly due to the dissolution of some ash components during washing which exposed more mercury on ash surface. Mercury adsorption data indicated that more than 90% of available mercury was adsorbed by fly ash even in the presence of 1000 mg l(-1) ammonia addition.     

Rapid quantification of polycyclic aromatic hydrocarbons in hydroxypropyl-beta-cyclodextrin (HPCD) soil extracts by synchronous fluorescence spectroscopy (SFS)

Synchronous fluorescence spectroscopy (SFS) was directly applied to rapidly quantify selected polycyclic aromatic hydrocarbons (PAHs: benzo[a]pyrene and pyrene) in aqueous hydroxypropyl-beta-cyclodextrin (HPCD) soil extract solutions from a variety of aged contaminated soils containing four different PAHs. The method was optimized and validated. The results show that SFS can be used to analyse benzo[a]pyrene and pyrene in HPCD based soil extracts with high sensitivity and selectivity. The linear calibration ranges were 4.0x10(-6)-1.0x10(-3)mM for benzo[a]pyrene and 6.0x10(-6)-1.2x10(-3)mM for pyrene in 10mM HPCD aqueous solution alone. The detection limits according to the error propagation theory for benzo[a]pyrene and pyrene were 3.9x10(-6) and 5.4x10(-6)mM, respectively. A good agreement between SFS and HPLC was reached for both determinations of PAHs in HPCD alone and in soil HPCD extracts. Hence, SFS is a potential means to simplify the present non-exhaustive hydroxypropyl-beta-cyclodextrin (HPCD)-based extraction technique for the evaluation of PAH bioavailability in soil.     

Cyanidation of mercury-rich tailings in artisanal and small-scale gold mining: identifying strategies to manage environmental risks in Southern Ecuador

In many countries, such as Brazil, Colombia, Ecuador, Indonesia, Venezuela and Zimbabwe, amalgamated tailings are leached with cyanide to recover remaining gold. This paper describes a recently completed study conducted at seven gold processing centers in Portovelo-Zaruma, Southern Ecuador, which involved consultation with local miners. The objective of the study was to understand the behaviour of mercury (with a focus on mercury loss) in artisanal gold mining operations through the evaluation of two cyanidation processes (Merrill-Crowe and Carbon-in-pulp), using a participatory approach. In order to assess the kinetics of mercury dissolution in cyanide, a bottle roll test was conducted in the laboratory. In the Merrill-Crowe cyanidation process, an average of 24.2% of metallic mercury was determined to be trapped at the bottom of the agitation tanks; 33.1% of mercury is lost in association with solid material and 11.7% is lost in solution. Approximately 31.0% of mercury in solution is sent to the zinc precipitation cells from which 27.8% is precipitated on the zinc shavings, with 3.23% remaining in solution. The mercury precipitated on to the zinc is lost to the atmosphere when the shavings are burned at 900 °C. In the Carbon-in-pulp (CIP) leaching system, 11.2% of the mercury is lost with the solid tailings; 31.6% of the mercury is associated with fine particles in suspension and 50.8% is likely dissolved. About 2.68% is trapped at the bottom of the tank and 3.72% is absorbed by the activated carbon. The bottle roll test revealed that mercury dissolution is directly proportional to cyanide concentration. At 10 g/ton of cyanide, approximately 42% of mercury was leached, whereas all gold was solubilized. During this study, miners recognized the risk associated with the cyanidation of mercury-rich tailings, and were aware of how much mercury is discharged to local streams and to the atmosphere. The active participation of miners in this study has led to the strengthening of their knowledge and awareness of mercury contamination, and has enhanced their understanding of the nature of the problem, as well as the weaknesses and strengths of the system they operate.     

Plutonium in groundwater at the 100K-Area of the U.S. DOE Hanford Site

We examined the concentration, size distribution, redox state and isotopic composition of plutonium (Pu) in groundwater at the 100K-Area at the U.S. Department of Energy's (DOE) Hanford Site. Total concentrations of Pu isotopes were extremely low (10(-4) to 10(-6) pCi/kg, approximately 10(4) to 10(6) atoms/kg) but measurable for the first time in the 100K-Area wells using mass spectrometric analyses that are much more sensitive than alpha spectroscopy methods used previously. Size fractionation data from two wells suggest that 7-29% of the Pu is associated with colloids, operationally defined here as particles between 1 kDa-0.2 microm in size. These colloids were collected using a 1 kDa cross-flow ultrafiltration (CFF) system developed specifically for groundwater actinide studies to include careful controls both in the field and during processing to ensure in situ geochemical conditions are maintained and size separations can be well characterized. Pu in this colloidal fraction was exclusively in the more reduced Pu(III/IV) form, consistent with the higher affinity of Pu in the lower oxidation states for particle surfaces. While the overall concentrations of Pu were low, the Pu isotopic composition suggests at least two local sources of groundwater Pu, namely, local Hanford reactor operations at the 100K-Area and spent nuclear fuel from the N-reactor, which was stored in concrete pools at this site. Differences between this site and the Savannah River Site (SRS) are noted, since groundwater Pu at the F-Area seepage basin at SRS has been found using these same methods, to be characterized by lower colloidal abundances and higher oxidation states. This difference is not directly attributable to groundwater redox potential or geochemical conditions, but rather the physical-chemical difference in Pu sources, which at SRS appear to be dominated downstream from the seepage basins by decay of 244Cm, resulting in more oxidized forms of 240Pu. There is no clear evidence for colloid facilitated transport of Pu in groundwater at the Hanford Site, since downstream wells have both an order of magnitude lower concentrations of Pu and a lower fractional colloidal distribution.     

Recent trends in ILO conventions related to occupational safety and health.

The present study was conducted to analyze the ratification status of International Labour Organization (ILO) conventions related to occupational safety and health (OSH) by ILO member states in terms of national indicators (length of ILO membership and national income status) and regional affiliation. 17 conventions designated as OSH-related by the 2003 International Labour Conference were examined. In general, countries with longer ILO membership ratified higher numbers of conventions related to OSH. With some variation, long-membership countries had the largest number of ratifications, followed by middle- and short-membership countries in all regions. There were also incremental increases in the number of ratifications for OSH-related conventions according to the national income status. Common regional characteristics that could not be explained by the factors studied also existed. Future efforts to increase ratification at an international level will need to consider the factors influencing ratification practice among the member states.     

Prenatal interphase FISH diagnosis of PLP1 duplication associated with Pelizaeus–Merzbacher disease

A submicroscopic genomic duplication in Xq22.2 that contains the entire proteolipid protein 1 gene (PLP1) is responsible for the majority of Pelizaeus–Merzbacher disease (PMD) patients. We previously developed an interphase FISH assay to screen for PLP1 duplications in PMD patients using peripheral blood and lymphoblastoid cell lines. This assay has been utilized as a clinical diagnostic test in our cytogenetics laboratory. To expand usage of the interphase FISH assay to prenatal diagnosis of PLP1 duplications, we examined three PMD families with PLP1 duplications utilizing aminiotic fluid samples. In two families the FISH assay revealed fetuses with PLP1 duplications, whereas the other fetus showed a normal copy number of PLP1. Haplotype analyses, as well as an additional FISH analysis using postnatal blood samples, confirmed the results of the prenatal analyses. Our study demonstrates utility of the interphase FISH assay in the prenatal diagnosis of PLP1 duplications in PMD. Copyright © 2001 John Wiley & Sons, Ltd.     

Quantifying dry NH3 deposition to an ombrotrophic bog from an automated NH3 field release system

Providing an accurate estimate of the dry component of N deposition to low N background, semi-natural habitats, such as bogs and upland moors dominated by Calluna vulgaris is difficult, but essential to relate nitrogen deposition to effects in these communities. To quantify the effects of NH₃ inputs to moorland vegetation growing on a bog at a field scale, a field release NH₃ fumigation system was established at Whim Moss (Scottish Borders) in 2002. Gaseous NH₃ from a line source was released along of a 60 m transect, when meteorological conditions (wind speed >2.5 m s^–1 and wind direction in the sector 180–215°) were met, thereby providing a profile of decreasing NH₃ concentration with distance from the source. In a complementary study, using a NH₃ flux chamber system, the relationships between NH₃ concentrations and cuticular resistances were quantified for a range of NH₃ concentrations and micrometeorological conditions for moorland vegetation. Cuticular resistances increased with NH₃ concentration from 11 s m^–1 at 3.0 g m^–3 to 30 s m^–1 at 30 g m^–3. The NH₃ concentration data and the concentration-dependent canopy resistance are used to calculate NH₃ deposition taking into account leaf surface wetness. The implications of using an NH₃ concentration-dependent cuticular resistance and the importance for refining critical loads are discussed.     

Volatile sesquiterpenes from Stachybotrys chartarum: Indicators for trichothecene producing mold species?

Trichodiene, a volatile sesquiterpene which is structurally related to trichothecene mycotoxins, has been identified in the headspace of growing Stachybotrys chartarum by GC/MS. It is possible that volatile sesquiterpene patterns can be used to characterize S. chartarum and related mold isolates as trichothecene producers, thus providing clear criteria for decisions concerning the occupancy and renovation of contaminated buildings.     

Chromosomal plasticity: mitigating the impacts of herbivory

Endoreduplication, the replication of the genome without mitosis, leads to endopolyploidy, an increase in cellular chromosome number. Although endoreduplication is widespread among angiosperms and other groups of eukaryotes, the degree to which this process is plastic under varying environmental conditions and its potential adaptive significance are not known. Here, using flow cytometry, we measured plasticity in chromosome number following the removal of apical dominance (simulating natural herbivory) in two ecotypes of Arabidopsis thaliana: Columbia and Landsberg erecta. We report that endopolyploidy of clipped Columbia plants was significantly different than unclipped controls following the removal of apical dominance and regrowth, and that cellular ploidy is positively associated with attributes of fitness (biomass, flower, fruit, and seed production). In contrast, clipped Landsberg erecta showed no significant differences in endopolyploidy and a decrease in seed production compared to unclipped controls; representing a significant genotype x environment interaction between ecotypes. Altering ploidy via endoreduplication adds a previously unknown way in which plants may be able to cope with environmental stress: enhancing regrowth rates and fitness following plant damage.