Valorization of potato peel waste: Recovery of p-hydroxy benzoic acid (antioxidant) through molecularly imprinted solid-phase extraction

Environmental Science and Pollution Research - Solid waste management of the potato peels, generated during the processing of potatoes, can be done sustainably by adding value to the peel waste....     

AVGWLF‐Based Estimation of Nonpoint Source Nitrogen Loads Generated Within Long Island Sound Subwatersheds1

Abstract: The Generalized Watershed Loading Functions (GWLF) model and its ArcView interface (AVGWLF) were used to estimate and examine the components of the total nitrogen (TN) nonpoint source (NPS) load generated within New York and Connecticut (CT) watersheds surrounding Long Island Sound (LIS, the Sound). The majority of data used as model inputs were generally available from online sources, and the work involved an overall calibration to streamflow and TN data in accordance with generic guidelines recommended in the GWLF manual. The GWLF model performance for three calibration and two validation watersheds in CT was compared with results of a detailed model, Hydrological Simulation Program in Fortran, developed in a previous study. The results of the application illustrate the usefulness of the relatively simpler, less parameter‐intensive GWLF model in performing exploratory loading analysis in preparation for adaptive nutrient management in the LIS watersheds. The presented methodology is valuable for identification of priority watersheds for NPS pollution reduction and also for planning‐level evaluation of best management practices to achieve the desired reductions. It is estimated that ground‐water base flow may be the largest pathway for NPS TN to the Sound, contributing about 54% of the total NPS TN load, a finding with significant implications for LIS total maximum daily load reduction scenarios. In addition to ground water, septic systems are estimated to contribute about 17% of the total load, with the remaining TN load being mostly runoff from urban (17%), agricultural (5%), and low impact (e.g., forest) areas (6%).     

Inter-species differences for polychlorinated biphenyls and polybrominated diphenyl ethers in marine top predators from the Southern North Sea: Part 2. Biomagnification in harbour seals and harbour porpoises

Harbour porpoises (Phocoena phocoena) and harbour seals (Phoca vitulina) were found to differ in the ability to metabolize polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Biomagnification factors (BMFs), calculated between both predators and their prey (sole - Solea solea and whiting - Merlangius merlangus), had a large range of variation (between 0.5 and 91 for PCBs and between 0.6 and 53 for PBDEs). For the higher chlorinated PCBs and the highest brominated PBDEs, the BMF values in adult males were significantly higher than in the juvenile individuals of both species. BMF values of hexa- to octa-PCBs were the highest, suggesting reduced ability to degrade these congeners. Harbour porpoises had higher BMFs for lower chlorinated PCBs and for all PBDEs compared to harbour seals. Other factors, which may influence biomagnification, such as the octanol-water partition coefficients and the trophic level position measured through stable isotope (δ¹⁵N) analysis, were found to be of lesser importance to predict biomagnification in the studied food chain.     

Effluent characterization and different modes of reuse in agriculture—a model case study

Background, aim, and scope  

High-quality waters are steadily retreating worldwide. Discharge of industrial effluent in the environment again declines soil/water quality to a great extent. On the other hand, effluent reuse in agriculture could be a means to conserve natural resources by providing assured water supply for growing crops. But industrial effluents are highly variable in nature, containing a variety of substances, and all are not favorable for farming. Appraisal and developing modes of effluent reuse is therefore a prerequisite to enable its proper use in agriculture. Effluents of various industries were assessed and approaches for their use in farming were developed for a particular region in this study. As per availability of effluents, the same could be implemented in other water-scarce areas.     

Nature and prevalence of non-additive toxic effects in industrially relevant mixtures of organic chemicals

The concentration addition (CA) and the independent action (IA) models are widely used for predicting mixture toxicity based on its composition and individual component dose–response profiles. However, the prediction based on these models may be inaccurate due to interaction among mixture components. In this work, the nature and prevalence of non-additive effects were explored for binary, ternary and quaternary mixtures composed of hydrophobic organic compounds (HOCs). The toxicity of each individual component and mixture was determined using the Vibrio fischeri bioluminescence inhibition assay. For each combination of chemicals specified by the 2ⁿ factorial design, the percent deviation of the predicted toxic effect from the measured value was used to characterize mixtures as synergistic (positive deviation) and antagonistic (negative deviation). An arbitrary classification scheme was proposed based on the magnitude of deviation (d) as: additive (10%, class-I) and moderately (10 < d  30%, class-II), highly (30 < d  50%, class-III) and very highly (>50%, class-IV) antagonistic/synergistic. Naphthalene, n-butanol, o-xylene, catechol and p-cresol led to synergism in mixtures while 1, 2, 4-trimethylbenzene and 1, 3-dimethylnaphthalene contributed to antagonism. Most of the mixtures depicted additive or antagonistic effect. Synergism was prominent in some of the mixtures, such as, pulp and paper, textile dyes, and a mixture composed of polynuclear aromatic hydrocarbons. The organic chemical industry mixture depicted the highest abundance of antagonism and least synergism. Mixture toxicity was found to depend on partition coefficient, molecular connectivity index and relative concentration of the components.     

Forecasts using Box–Jenkins models for the ambient air quality data of Delhi City

The monthly maximum of the 24-h average time-series data of ambient air quality-sulphur dioxide (SO(2)), nitrogen dioxide (NO(2)) and suspended particulate matter (SPM) concentration monitored at the six National Ambient Air Quality Monitoring (NAAQM) stations in Delhi, was analysed using Box-Jenkins modelling approach (Box et al. 1994). Univariate linear stochastic models were developed to examine the degree of prediction possible for situations where only the past record of pollutant data are available. In all, 18 models were developed, three for each station for each of the respective pollutant. The model evaluation statistics suggest that considerably satisfactory real-time forecasts of pollution concentrations can be generated using the Box-Jenkins approach. The developed models can be used to provide short-term, real-time forecasts of extreme air pollution concentrations for the Air Quality Control Region (AQCR) of Delhi City, India.     

Activated carbon from Ceiba pentandra hulls, an agricultural waste, as an adsorbent in the removal of lead and zinc from aqueous solutions

The ability of low-cost activated carbon prepared from Ceiba pentandra hulls, an agricultural waste material, for the removal of lead and zinc from aqueous solutions has been investigated. In the batch tests experimental parameters were studied, including solution pH, contact time, adsorbent dose and initial metal ions concentration. The adsorbent exhibited good sorption potential at pH 6.0. Maximum removal of lead (99.5%) and of zinc (99.1%) with 10 g/l of sorbent was observed at 50 mg/L sorbate concentration. Removals of about 60-70% occurred in 10 min, and equilibrium was attained at around 50 min for both metals. The functional groups (CO, SO,-OH) present on the carbon surface were responsible for the adsorption of metal ions. The adsorption parameters were analysed using both the Freundlich and Langmuir models. The data are better fitted by the Freundlich isotherm as compared to Langmuir model, and the adsorption capacities for lead and zinc were 25.5 and 24.1 mg/g, respectively. Kinetics of adsorption obeyed a second order rate equation and the rate constant was found to be 2.71 x 10(-2) and 2.08 x 10(-2) g/mg/min for lead and zinc, respectively. The desorption studies were carried out using dilute HCl, and the effect of HCl concentration on desorption was studied. Maximum desorptions of 85% for lead and 78% for zinc were attained with 0.15 M HCl.     

Improved bioavailability and biodegradation of a model polyaromatic hydrocarbon by a biosurfactant producing bacterium of marine origin

Polyaromatic hydrocarbons (PAHs) are organic pollutants mostly derived from the processing and combustion of fossil fuels and cause human health hazards. In the present study a marine biosurfactant producing strain of Bacillus circulans was used to increase the bioavailability and consequent degradation of a model polyaromatic hydrocarbon, anthracene. Although the organism could not utilize anthracene as the sole carbon source, it showed better growth and biosurfactant production in an anthracene supplemented glycerol mineral salts medium (AGlyMSM) compared to a normal glycerol mineral salts medium (GlyMSM). The biosurfactant product showed high degree of emulsification of various hydrocarbons. Analysis by gas chromatography (GC), high performance thin layer chromatography (HPTLC) and Fourier transform infrared spectroscopy (FTIR) showed that the biosurfactant could effectively entrap and solubilize PAH. Thin layer chromatographic analysis showed that anthracene was utilized as a carbon substrate for the production of biosurfactant. Thus organic pollutant anthracene was metabolized and converted to biosurfactants facilitating its own bioremediation.     

A comparative assessment of the impact of different occupations on workers' static musculoskeletal fitness.

An ergonomic assessment of the involvement of static muscular forces like back strength, grip strength and pinch strength in different occupations was made. A study was conducted on 45 normal adult males (15 subjects per group) which included video display terminal (VDT) operators, industrial workers and safety inspectors. Their maximum back strength, handgrip strength and pinch strength were measured with dynamometers. The observed values of back strength were significantly lower in VDT operators while significantly higher in safety inspectors and moderate in industrial workers. The values of grip strength and pinch strength of all sample groups were more or less similar. The findings clearly indicate that static muscular strength varies significantly in different occupations. Heavy static muscular load might lead to an accumulation of metabolic waste and toxins on the back resulting in lower back strength in VDT operators and industrial workers.     

Allelopathic response of <Emphasis Type="Italic">Vetiveria zizanioides</Emphasis> (L.) Nash on members of the family Enterobacteriaceae and <Emphasis Type="Italic">Pseudomonas</Emphasis> spp.

The biological removal of phosphates was carried as a part of treatment strategy. Vetiveria zizanioides (L.) Nash belonging to the family Poaceae was used for biological removal of biostimulants. Vetiver reportedly has mycorrhizal association; besides having potential for removal of PO₄ ⁻³ also showed allelopathic affect on the microorganisms present in the water. In fact after a period of 96 h old roots of this plant have been found to have killing effects on the E. coli, Enterobacter spp. Pseudomonas spp. belonging to the family Enterobacteriaceae. The paper is opening a new face of study.