Trace Element Concentrations and Bioindicator Responses in Tree Swallows from Northwestern Minnesota

Extremely high concentrations of cadmium (3.5 μg/g dry wgt.) and elevated concentrations of chromium (>10 μg/g dry wgt.) and mercury (1.6 μg/g dry wgt.) were reported in waterbird tissues at Agassiz National Wildlife Refuge in northwestern Minnesota in 1994. Tree swallows (Tachycineta bicolor) were studied during 1998–2001 at three drainages into the Refuge, two pools on the Refuge, and at a nearby reference location to document whether high levels of contaminants were still present, and if so to quantify the source and severity of the contamination. Trace elements were measured in tree swallow eggs, livers, and diet. Reproductive success and bioindicator responses were monitored. In 2000, water was drawn down on Agassiz Pool, one of the main pools on the Refuge. This presented an opportunity to evaluate the response of trace element concentrations in the diet and tissues of tree swallows after reflooding. High concentrations of trace elements were not detected in swallow tissues, nor were there differences among locations. Less than 20% of swallow samples had detectable concentrations of cadmium or chromium. Mercury concentrations were low and averaged <0.25 μg/g dry wgt. in swallow tissues. Trace elements, including mercury, did not increase in tree swallows following the 2000 drawdown at Agassiz Pool. Hatching success and survival of nestlings to 12 days-of-age for tree swallows on the Refuge were similar to the national average and consistent with background trace element concentrations. Bioindicator measurements were within the normal ranges as well.     

Factors affecting TCLP lead leachability from computer CPUs

The factors impacting lead leachability from computer central processing units (CPUs) during the toxicity characteristic leaching procedure (TCLP) were investigated. Several CPUs were disassembled and their component materials were decreased in size to meet the requirements of the TCLP. The impact of CPU composition was examined by leaching different combinations of the CPU components. The ferrous metal content of the mixture greatly impacted lead leaching. TCLP lead concentrations of CPUs predicted by leaching the lead-bearing printed wire boards alone were much greater than those measured when the ferrous metal of the CPU was included in the mixture. The leaching of iron and zinc from the galvanized steel components of the CPU created electrochemical conditions where lead was less soluble. Additional size reduction beyond that required by the TCLP did not result in additional lead leaching. As the volume of head space above the leaching solution increased, the concentration of lead measured increased as well.     

Modeling methyl isothiocyanate soil flux and emission ratio from a field following a chemigation of metam-sodium

Metam-sodium had become the most heavily used soil fumigant in recent years as the deadline approached for methyl bromide to phase out in January 2005. After application, metam-sodium decomposes rapidly to methyl isothiocyanate (MITC), a highly toxic compound capable of killing a wide spectrum of soil-borne pests. Inhalation risk of MITC ranked high among airborne agricultural pesticides in California. Information about off-gassing intensity and percentage of emission is essential for exposure risk assessment and mitigation measures, but is limited, especially for new application methods such as drip chemigation. Air concentrations of MITC were monitored around a field treated with metam-sodium through surface drip irrigation system. The field was tarped with plastic films before the chemigation. The air concentrations at receptor locations were simulated for the period of air monitoring with the Industrial Source Complex (ISC3) Dispersion Model, and soil flux density of MITC at various periods after chemigation was estimated through a back-calculation procedure. The estimated soil flux density of MITC showed a diurnal pattern, with the daytime flux stronger than nighttime. However, the average air concentration at nighttime was higher than that at daytime. Soil flux density peaked at 4.30 microg m-2 s-1 in the first 12-h period after chemigation, then declined with time. The MITC emission percentage in the first 60-h was 2.65% of applied mass, of which 57% occurred in the first 24-h after chemigation. The study indicated that the tarped bed drip application method of metam-sodium had a relatively good control of MITC emission from soil.     

In situ chemical oxidation: Lessons learned at multiple sites

This paper compiles a detailed set of in situ chemical oxidation (ISCO) lessons learned pertaining to design, execution, and safety based on global experiences over the last 20 years. While the benefits of a “correct” application are known (e.g., cost effectiveness, speed, permanence of treatment), history also provides examples of a variety of “incorrect” applications. These provide an opportunity to highlight recurring themes that resulted in failures. ISCO is, and will continue to provide, an important remedial tool for site remediation, particularly as a component of a multifaceted approach for addressing large and complex sites. Future success, however, requires an objective understanding of both the benefits and the limitations of the technology. The ability to learn from the mistakes of the past provides an opportunity to eliminate, or at least minimize, them in the future. Over the last 25 years of ISCO application, process understanding and knowledge have improved and evolved. This paper combines a thorough discussion of lessons learned through decades of ISCO implementation throughout all aspects of ISCO projects with an analysis of changes to the ISCO remediation market. By discussing the interplay of these two themes and providing recommendations from collective lessons learned, we hope to improve the future of safe, cost‐effective, and successful applications of ISCO.     

An input-output balance study for PCBs in humans

Polychlorinated biphenyl (PCB) input-output balance studies were performed on five male volunteers, aged between 24 and 30, for periods of 8-14 days in 1998. Dietary exposure was quantified by the duplicate meals method and varied between 220 and 460 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the study period. Dietary intake was dominated by congeners 118, 138, 153 and 180. Average faecal outputs for the five volunteers were 50-290 ng of sigmaPCB (sum of 20 congeners) per day for each of the five individuals over the same period and was dominated by the same four congeners. Whilst the total PCB fluxes were therefore into the body (i.e., accumulation), important differences were noted for different individual congeners. PCBs 44, 47, 49, 52, 60, 66, 101, 105, 110, 118, 149, 151 and 183 all showed net absorption for all five volunteers. Some congeners showed a net absorption in some of the individuals but net excretion in others, as seen by other workers. These congeners (PCBs 138, 153, 180, 187 and 194) are all higher chlorinated congeners and lack meta-para-vicinal hydrogen atoms. There were differences in the net absorption/excretion between individuals, which appeared to be a function of body fat index (BFI). The volunteers with the lowest BFIs showed net excretion for the greatest number of congeners, whilst the individual with the highest BFI was a net absorber of all the congeners studied. The problems in determining and interpreting absorption efficiency values for use in quantitative exposure assessments are discussed. Various factors that influence net absorption of PCBs and other persistent organic pollutants are identified. These include compound properties (including susceptibility to metabolism), the individual's fat status and balance, exposure history and diet.     

Drinking water risk assessment in practice: the case of Swedish drinking water producers at risk from floods

To achieve a safe and reliable drinking water supply, water producers need to manage a large range of risks regarding both water quality and quantity. A risk management approach where risks are systematically identified and handled in a preventive manner is promoted by the World Health Organization and supported by researchers and drinking water experts worldwide. Risk assessment is an important part of such a management approach, and a variety of tools for risk assessment are described in the literature. There is, however, little knowledge of how drinking water risk assessment is performed in practice, including which tools that are actually used. This study investigates the use of risk assessment tools, and the approach to risk management, on a local level in the Swedish water sector. It is based on interviews with key persons from a targeted selection of water producers. We find that the application of tools as well as the approach to risk assessment and management differs considerably between the water producers. The tools most frequently used are mainly the ones promoted or required by Swedish national organizations. Although many of the water producers have done some kind of risk assessment, most have not implemented a risk management approach. Furthermore, their knowledge of the concepts of risk and risk management is often limited. The largest challenge identified is to prioritize risk assessment, so that it is actually performed and then used as a basis for managing risk in a systematic way.     

The rationales behind the unit-segment theory and its analysis methodology for modeling vehicular movement networks

The theory of space accessibility analysis, space syntax, has been considered for capturing trip-makers’ route-choice decisions with an understanding that, while selecting routes, trip-makers tend to follow forward-facing fields traditionally represented by axial lines. But the idea of treating axial lines as a set of roadway segments representing an urban texture has remained under scrutiny when distinct procedures have been tested without much success. Nor has the axial-line theory seemed to gain much popularity within the orthodox transportation planning community. Studies show that a long axial line is found gaining configurational centrality, in general, for being well connected to its incident lines. Fragmenting a long axial line results in weakening it (in centrality terms), but also in generating a locally oriented model. Recent investigations, dealing with this problem, have resulted in the emergence of the unit-segment theory, which has turned out to be more sensitive to the local structures located within a large urban texture than the axial counterpart for the purpose of modeling vehicular movement networks without using origin–destination trip-counts. Essentially, the question now is: Is the unit-segment analysis also capable of generating syntax configurations that are equally sensitive to large and complex urban textures? What should be the methodology of such an analysis? This paper throws deeper insights into these questions by producing theoretical and empirical research findings and seeks to develop a common ground for both transportation planning and space syntax communities to work together for gaining a better understanding of how urban configurations relate to urban vehicular movement networks.     

Fatty acids composition of Caenorhabditis elegans using accurate mass GCMS-QTOF

The free living nematode Caenorhabditis elegans is a proven model organism for lipid metabolism research. Total lipids of C. elegans were extracted using chloroform and methanol in 2:1 ratio (v/v). Fatty acids composition of the extracted total lipids was converted to their corresponding fatty acids methyl esters (FAMEs) and analyzed by gas chromatography/accurate mass quadrupole time of flight mass spectrometry using both electron ionization and chemical ionization techniques. Twenty-eight fatty acids consisting of 12 to 22 carbon atoms were identified, 65% of them were unsaturated. Fatty acids containing 12 to17 carbons were mostly saturated with stearic acid (18:0) as the major constituent. Several branched-chain fatty acids were identified. Methyl-14-methylhexadecanoate (iso- 17:0) was the major identified branched fatty acid. This is the first report to detect the intact molecular parent ions of the identified fatty acids in C. elegans using chemical ionization compared to electron ionization which produced fragmentations of the FAMEs.