Polycyclic aromatic hydrocarbon contamination in stormwater detention pond sediments in coastal South Carolina

The purpose of this study was to characterize the polycyclic aromatic hydrocarbon (PAH) contamination in the sediments of stormwater detention ponds in coastal South Carolina. Levels of the sum of PAH analytes were significantly higher in the sediments of commercial ponds compared to that of reference, golf course, low-density residential, and high-density residential ponds. Isomer ratio analysis suggested that the predominant source of PAHs were pyrogenic; however, many ponds had a PAH signature consistent with mixed uncombusted and combusted PAH sources. PAH levels in these sediments could be modeled using both pond drainage area and pond surface area. These results demonstrate that the sediment from most commercial ponds, and a few residential and golf course ponds, were moderately contaminated with PAHs. PAH levels in these contaminated ponds exceeded between 42% and 75% of the ecological screening values for individual PAH analytes established by US EPA Region IV, suggesting that they may pose a toxicological risk to wildlife.     

Low paternity in the hornet Vespa crabro indicates that multiple mating by queens is derived in vespine wasps

Queen mating frequency was studied in the European hornet, Vespa crabro, by analyzing four DNA microsatellite loci in 20 workers from each of 14 nests. Queens were found to be predominantly singly mated (9/14), although double (4/14) and triple mating (1/14) also occurred. For most multiply mated queens, paternity was significantly biased with the majority male fathering on average 80% of the female offspring. The population-wide effective mating frequency was therefore low (1.11), and sister-sister relatedness high (0.701 ± 0.023 SE). Low effective mating frequency in Vespa, in combination with data from other vespines, suggests that high paternity frequency is derived in the group. Some problems with the non-detection of fathers, where the queen was not sampled or shared alleles with males, are analyzed. Received: 16 November 1998 / Received in revised form: 29 March 1999 / Accepted: 12 April 1999     

Sedimentary Pigments and Organic Matter in Relation to Benthic Fauna in the Tan-Shui Estuary, Taiwan

The benthic ecological structure of the Tan-Shui estuary, Taiwan is changed due to long term effects of dumping of urban wastewater and of engineering actions. to monitor these changes, we sampled and analyzed benthos and sediment from 12 stations on the estuary.

The composition of the dominant species of benthos varied seasonally, with molluscan and crustacean species having greater numbers and higher frequencies of occurrence than other species. the dominant taxa during winter were Nassarius sp. and Maldanidae at two stations. Analysis using Simpson's index and Shannon's index showed the benthic community varied more in coastal areas than in offshore areas.

Physicochemical analysis showed that most of the Tan-Shui estuary consisted of sandy sediment. the variations in concentrations of organic carbon and total nitrogen at each station were small. Although the concentrations of chlorophyll-a and carotenoid at all stations were generally low, the two stations had the highest concentrations, and we concluded that the concentration of pigments in these sediments was related to the abundance of benthos. the community structure of the benthos reflected the characteristics of the sediments, and benthic species exhibited selection of and adaptation to specific sedimentary environments.     

Power-law behaviour and parametric models for the size-distribution of forest fires

This paper examines the distribution of areas burned in forest fires. Empirical size distributions, derived from extensive fire records, for six regions in North America are presented. While they show some commonalities, it appears that a simple power-law distribution of sizes, as has been suggested by some authors, is too simple to describe the distributions over their full range. A stochastic model for the spread and extinguishment of fires is used to examine conditions for power-law behaviour and deviations from it. The concept of the extinguishment growth rate ratio (EGRR) is developed. A null model with constant EGRR leads to a power-law distribution, but this does not appear to hold empirically for the data sets examined. Some alternative parametric forms for the size distribution are presented, with a four-parameter ‘competing hazards’ model providing the overall best fit.     

Determining the Causes of Benthic Condition

A benthic index for northern Gulf of Mexico estuaries has been developed and successfully validated by the Environmental Monitoring and Assessment Program for Estuaries (EMAP-E) in the Louisianian Province. The benthic index is a useful and valid indicator of estuarine condition that is intended to provide environmental managers with a simple tool for assessing the ecological condition of benthic macroinvertebrate communities. Associations between the benthic index and indicators of hypoxia, sediment contamination, and sediment toxicity were investigated to determine the most probable cause(s) of degraded benthic condition. The results showed that, on a local scale, the associations between the benthic index and potential environmental causes differed among estuaries. In Pensacola Bay, FL, for example, there was a significant association between the levels of toxic chemicals (e.g. DDT, silver, and TBT) in the sediment and the benthic index, especially in the bayous which have known sediment contamination problems. In Mobile Bay, however, degraded benthic communities were more closely associated with eutrophication and hypoxia. Nevertheless, a benthic index is a valuable tool for identifying areas that could be already degraded and tracking the status of environmental condition in large geographical regions.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Using variance components to estimate power in a hierarchically nested sampling design

We used variance components to assess allocation of sampling effort in a hierarchically nested sampling design for ongoing monitoring of early life history stages of the federally endangered Devils Hole pupfish (DHP) (Cyprinodon diabolis). Sampling design for larval DHP included surveys (5 days each spring 2007–2009), events, and plots. Each survey was comprised of three counting events, where DHP larvae on nine plots were counted plot by plot. Statistical analysis of larval abundance included three components: (1) evaluation of power from various sample size combinations, (2) comparison of power in fixed and random plot designs, and (3) assessment of yearly differences in the power of the survey. Results indicated that increasing the sample size at the lowest level of sampling represented the most realistic option to increase the survey’s power, fixed plot designs had greater power than random plot designs, and the power of the larval survey varied by year. This study provides an example of how monitoring efforts may benefit from coupling variance components estimation with power analysis to assess sampling design.     

Response of balanced network models to large-scale perturbation: Implications for evaluating the role of small pelagics in the Gulf of Maine

Exploring the response of an ecosystem, and subsequent tradeoffs among its biological community, to human perturbations remains a key challenge for the implementation of an ecosystem approaches to fisheries (EAF). To address this and related issues, we developed two network (or energy budget) models, Ecopath and Econetwrk, for the Gulf of Maine ecosystem. These models included 31 network “nodes” or biomass state variables across a broad range of trophic levels, with the present emphasis to particularly elucidate the role of small pelagics. After initial network balancing, various perturbation scenarios were evaluated to explore how potential changes to different fish, fisheries and lower trophic levels can affect model outputs. Categorically across all scenarios and interpretations thereof, there was minimal change at the second trophic levels and most of the “rebalancing” after a perturbation occurred via alteration of the diet matrix. Yet the model results from perturbations to a balanced energy budget fall into one of three categories. First, some model results were intuitive and in obvious agreement with established ecological and fishing theory. Second, some model results were counter-intuitive upon initial observation, seemingly contradictory to known ecological and fishing theory; but upon further examination the results were explainable given the constraints of an equilibrium energy budget. Finally, some results were counter-intuitive and difficult to reconcile with theory or further examination of equilibrium constraints. A detailed accounting of biomass flows for example scenarios explores some of the non-intuitive results more rigorously. Collectively these results imply a need to carefully track biomass flows and results of any given perturbation and to critically evaluate the conditions under which a new equilibrium is obtained for these types of models, which has implications for dynamic simulations based off of them. Given these caveats, the role of small pelagics as a prominent component of this ecosystem remains a robust conclusion. We discuss how one might use this approach in the context of further developing an EAF, recognizing that a more holistic, integrated perspective will be required as we continue to evaluate tradeoffs among marine biological communities.     

A hierarchical model for spatial capture-recapture data

Estimating density is a fundamental objective of many animal population studies. Application of methods for estimating population size from ostensibly closed populations is widespread, but ineffective for estimating absolute density because most populations are subject to short-term movements or so-called temporary emigration. This phenomenon invalidates the resulting estimates because the effective sample area is unknown. A number of methods involving the adjustment of estimates based on heuristic considerations are in widespread use. In this paper, a hierarchical model of spatially indexed capture-recapture data is proposed for sampling based on area searches of spatial sample units subject to uniform sampling intensity. The hierarchical model contains explicit models for the distribution of individuals and their movements, in addition to an observation model that is conditional on the location of individuals during sampling. Bayesian analysis of the hierarchical model is achieved by the use of data augmentation, which allows for a straightforward implementation in the freely available software WinBUGS. We present results of a simulation study that was carried out to evaluate the operating characteristics of the Bayesian estimator under variable densities and movement patterns of individuals. An application of the model is presented for survey data on the flat-tailed horned lizard (Phrynosoma mcallii) in Arizona, USA.