Investigation of new indirect spectrophotometric method for the determination of carbofuran in carbamate pesticides

A new spectrophotometric method has been investigated for the determination of Carbofuran pesticide. The method was based on the hydrolysis of the pesticides. The hydrolyzed products, methylamine on reaction with sodium nitroprusside solution in acetone medium gives a purple colored solution. The absorbance of the resulting solution was measured at 530 nm. Conditions for the complete hydrolysis of pesticides and quantitative determination of methylamine were optimized. From the standard calibration plot of methylamine, the amount of pesticides was calculated. The amount of active ingredients in commercial products was determined from the amount of methylamine found. It was observed that lower concentration of the active ingredients were present in the commercial products. The limit of detection and quantification was calculated and found to be 0.804 and 2.68 ppm respectively.     

Greenhouse gas emission from small clinics solid waste management scenarios in an urban area of an underdeveloping country: A life cycle perspective

This study aimed to investigate the effects on the environment of small clinics solid waste management by applying a life cycle analysis approach. Samples were collected from 371 private clinics situated in densely populated areas of Hyderabad, Pakistan. The solid waste from surveyed clinics was categorically quantified on daily basis for 30 consecutive days. The functional unit for waste was defined as 1 tonne. System limitations were defined as landfilling, incineration, composting, material recovery, and transportation of solid waste. The treatment and disposal methods were assessed according to their greenhouse gas emission rate. For the evaluation, three different scenarios were designed. The second scenario resulted in the highest emission value of 1491.78 kg CO₂ eq/tonne of solid waste due to mixed waste incineration, whereas the first scenario could not offer any saving because of uncovered landfilling and 67.5% higher transport fuel consumption than the proposed network. The proposed third scenario was found to be a better solution for urban clinics solid waste management, as it resulted in savings of 951.38 kg CO₂ eq/tonne of solid waste. This integrated design is practicable by resource-constrained economy. This system consists of composting, material recovery, and incineration of hazardous waste. The proposed system also includes a feasible transportation method for urban area collection networks. The findings of the present study can play a vital role in documenting evidence and for policymakers to plan the solid waste management of clinics, as previously no studies have been conducted on this particular case.

Implications: This study aims to highlight the impact of small clinics solid waste management scenarios on the environment in a developing country’s urban area. Life cycle analysis is used for comparison of greenhouse gase emission from different scenarios, including the purposed integrated method. Small clinics play a very important role in health care, and their waste management is a very serious issue; however, there are no previous studies on this particular case to the best knowledge of the authors. This study can be considered as forerunner effort to quantify the environmental footprint of small clinics solid waste in urban areas of a developing country.     

A comparative study of effects of cigarette and bidi smoking on respiratory function tests

The effects of cigarette and bidi smoking on pulmonary function tests have been studied in 90 healthy males from North India Forced vital capacity (FVC), peak expiratory flow rate (PEFR), forced expiratory volume in 1 sec (FEV) were determined in 30 nonsmokers (as control group), 30 cigarette smokers and 30 bidi smokers. All the above pulmonary function parameters were found to be lower among smokers as compared to nonsmokers. Moreover, the decrease in the pulmonary function tests was greater in cigarette smokers as compared to bidi smokers.     

Organ-wise accumulation of fluoride in Prosopis juliflora and its potential for phytoremediation of fluoride contaminated soil

Fluoride (F) contamination is a global environmental problem, as there is no cure of fluorosis available yet. Prosopis juliflora is a leguminous perennial, phreatophyte tree, widely distributed in arid and semi-arid regions of world. It extensively grows in F endemic areas of Rajasthan (India) and has been known as a “green” solution to decontaminate cadmium, chromium and copper contaminated soils. This study aims to check the tolerance potential of P. juliflora to accumulate fluoride. For this work, P. juliflora seedlings were grown for 75 d on soilrite under five different concentrations of F viz., control, 25, 50, 75 and 100 mg NaF kg⁻¹. Organ-wise accumulation of F, bioaccumulation factor (BF), translocation factor (TF), growth ratio (GR) and F tolerance index (TI) were examined. Plant accumulated high amounts of F in roots. The organ-wise distribution showed an accumulation 4.41 mg kg⁻¹dw, 12.97 mg kg⁻¹dw and 16.75 mg kg⁻¹dw F, in stem, leaves and roots respectively. The results indicated significant translocation of F from root into aerial parts. The bioaccumulation and translocation factor values (>1.0) showed high accumulation efficiency and tolerance of P. juliflora to F. It is concluded that P. juliflora is a suitable candidate for phytoremediation purpose and can be explored further for the decontamination of F polluted soils.     

Removal of cadmium(II), lead(II), and chromium(VI) ions from aqueous solution using clay

Removal of cadmium(II), lead(II), and chromium(VI) from aqueous solution using clay, a naturally occurring low-cost adsorbent, under various conditions, such as contact time, initial concentration, temperature, and pH has been investigated. The sorption of these metals follows both Langmuir and Freundlich adsorption isotherms. The magnitude of Langmuir and Freundlich constants at 30°C for cadmium, lead, and chromium indicate good adsorption capacity. The kinetic rate constants (K _ad) indicate that the adsorption follows first order. The thermodynamic parameters: free energy change (ΔG ^o), enthalpy change (ΔH ^o), and entropy change (ΔS ^o) show that adsorption is an endothermic process and that adsorption is favored at high temperature. The results reveal that clay is a good adsorbent for the removal of these metals from wastewater.     

Dynamic risk assessment using failure assessment and Bayesian theory

To ensure the safety of a process system, engineers use different methods to identify the potential hazards that may cause severe consequences. One of the most popular methods used is quantitative risk assessment (QRA) which quantifies the risk associated with a particular process activity. One of QRA's major disadvantages is its inability to update risk during the life of a process. As the process operates, abnormal events will result in incidents and near misses. These events are often called accident precursors. A conventional QRA process is unable to use the accident precursor information to revise the risk profile. To overcome this, a methodology has been proposed based on the work of Meel and Seider (2006). Similar to Meel and Seider (2006) work, this methodology uses Bayesian theory to update the likelihood of the event occurrence and also failure probability of the safety system. In this paper the proposed methodology is outlined and its application is demonstrated using a simple case study. First, potential accident scenarios are identified and represented in terms of an event tree, next, using the event tree and available failure data end-state probabilities are estimated. Subsequently, using the available accident precursor data, safety system failure likelihood and event tree end-state probabilities are revised. The methodology has been simulated using deterministic (point value) as well as probabilistic approach. This Methodology is applied to a case study demonstrating a storage tank containing highly hazardous chemicals. The comparison between conventional QRA and the results from dynamic failure assessment approach shows the significant deviation in system failure frequency throughout the life time of the process unit.     

Preparation and Characterization of Gamma Irradiated Sugar Containing Starch/Poly (Vinyl Alcohol)-Based Blend Films

Blends based on different ratios of starch (35–20%) and plasticizer (sugar; 0–15%) keeping the amount of poly(vinyl alcohol) (PVA) constant, were prepared in the form of thin films by casting solutions. The effects of gamma-irradiation on thermal, mechanical, and morphological properties were investigated. The studies of mechanical properties showed improved tensile strength (TS) (9.61 MPa) and elongation at break (EB) (409%) of the starch-PVA-sugar blend film containing 10% sugar. The mechanical testing of the irradiated film (irradiated at 200 Krad radiation dose) showed higher TS but lower EB than that of the non-radiated film. FTIR spectroscopy studies supported the molecular interactions among starch, PVA, and sugar in the blend films, that was improved by irradiation. Thermal properties of the film were also improved due to irradiation and confirmed by thermo-mechanical analysis (TMA), differential thermo-gravimetric analysis (DTG), differential thermal analysis (DTA), and thermo-gravimetric analysis (TGA). Surface of the films were examined by scanning electron microscope (SEM) image that supported the evidence of crosslinking obtained after gamma irradiation on the film. The water up-take and degradation test in soil of the film were also evaluated. In this study, sugar acted as a good plasticizing agent in starch/PVA blend films, which was significantly improved by gamma radiation and the prepared starch-PVA-sugar blend film could be used as biodegradable packaging materials.     

Bacteriological quality assessment of drinking water available at the flood affected areas of Peshawar

Monsoon flooding occurred in the main areas of the Khyber Pakhtunkhwa, Punjab, and Balochistan as well as parts of Gilgit Baltistan of Pakistan and Azad Jammu Kashmir in July 2010. Water-borne diseases such as cholera, enteric fever, and dysentery were common among the inhabitants of flood-affected areas which were selected for sample collection. In the present study, 10 sites in District Peshawar were selected and drinking water samples collected. These samples were analyzed for the total plate count (TPC), total coliform bacteria (TCB), total fecal coliform bacteria (TFCB), Escherichia coli (EC), Pseudomonas aeruginosa (PA), Vibrio cholerae (VB), Salmonella Shigella, and Staphylococcus aureus. The TPC ranged from 8 × 10¹ to 7 × 10⁴ CFU/ml. The TCB ranged from <1.1 to 280 MPN/100 ml. Twenty percent of the samples were contaminated with TFCB, EC, Salmonella, Shigella, and Staphylococcus aureus, while only one sample contaminated with PA. Forty percent of the samples were contaminated with VB. The surface and well water was greatly contaminated by flooding and major improvements on priority basis are essential.     

Bioaccumulation of metals in human blood in industrially contaminated area

The consumption of contaminated food crops, meat and milk has significantly increased the concentrations of trace metals in human blood as compared to the control area.     

In vitro metabolism of deltamethrin by stem and leaf homogenates of tobacco plants

Stem and leaf homogenates from tobacco plants metabolised deltamethrin by oxidative and hydrolytic actions on the insecticide. Although a major portion of deltamethrin remained unchanged, metabolites such as 3-phenoxybenzaldehyde, 3-phenoxybenzoic acid and 3-(2,2-dibromonyl)-2,2-dimethylcyclopropanecarboxylic acid were formed. The data suggest a major portion of the insecticide would remain unchanged when absorbed by tobacco plants.