A prediction model for the flash point of binary liquid mixtures

A prediction model based on the partial least squares of the multivariate statistical analysis methods was developed for the flash point (FP) of binary liquid mixtures. Estimation of the FP of flammable substances is important for safety measures in industrial processes. Since experimental FP data of liquid mixtures are scarce in the literature, there have been many researches to estimate the FP of liquid mixtures using physicochemical laws. In this study, the partial least squares (PLS) method using experimental data was used as a prediction model of the FP of binary liquid mixtures. The FPs predicted from the PLS method were also compared to results from the existing calculating methods using physicochemical laws such as Raoult's law and the Van Laar equation.     

Nitrogen oxides emissions from the MILD combustion with the conditions of recirculation gas

The nitrogen oxides (NO_x) reduction technology by combustion modification which has economic benefits as a method of controlling NO_x emitted in the combustion process, has recently been receiving a lot of attention. Especially, the moderate or intense low oxygen dilution (MILD) combustion which applied high temperature flue gas recirculation has been confirmed for its effectiveness with regard to solid fuel as well. MILD combustion is affected by the flue gas recirculation ratio and the composition of recirculation gas, so its NO_x reduction efficiency is determined by them. In order to investigate the influence of factors which determine the reduction efficiency of NO_x in MILD coal combustion, this study changed the flow rate and concentration of nitrogen (N₂), carbon dioxide (CO₂) and steam (H₂O) which simulate the recirculation gas during the MILD coal combustion using our lab-scale drop tube furnace and performed the combustion experiment. As a result, its influence by the composition of recirculation gas was insignificant and it was shown that flue gas recirculation ratio influences the change of NO_x concentration greatly. Implications: We investigated the influence of factors determining the nitrogen oxides (NO_x) reduction efficiency in MILD coal combustion, which applied high-temperature flue gas recirculation. Using a lab-scale drop tube furnace and simulated recirculation gas, we conducted combustion testing changing the recirculation gas conditions. We found that the flue gas recirculation ratio influences the reduction of NO_x emissions the most.     

Mineralogical and geochemical characterization of arsenic in an abandoned mine tailings of Korea

The mineralogical and chemical characteristics of As solid phases in arsenic-rich mine tailings from the Nakdong As–Bi mine in Korea was investigated. The tailings generated from the ore roasting process contained 4.36% of As whereas the concentration was up to 20.2% in some tailings from the cyanidation process for the Au extraction. Thin indurated layers and other secondary precipitates had formed at the surfaces of the tailings piles and the As contents of the hardened layers varied from 2.87 to 16.0%. Scorodite and iron arsenate (Fe₃AsO₇) were the primary As-bearing crystalline minerals. Others such as arsenolamprite, bernardite and titanium oxide arsenate were also found. The amorphous As–Fe phases often showed framboidal aggregates and gel type textures with desiccation cracks. Sequential extraction results also showed that 55.7–91.1% of the As in tailings were NH₄-oxalate extractable As, further confirmed the predominance of amorphous As–Fe solid phases. When the tailings were equilibrated with de-ionized water, the solution exhibited extremely acidic conditions (pH 2.01–3.10) and high concentrations of dissolved As (up to 29.5 mg L⁻¹), indicating high potentials for As to be released during rainfall events. The downstream water was affected by drainage from tailings and contained 12.7–522 μg L⁻¹ of As. The amorphous As–Fe phases in tailings have not entirely been stabilized through the long term natural weathering processes. To remediate the environmental harms they had caused, anthropogenic interventions to stabilize or immobilize As in the tailings pile should be explored.     

Oxidative DNA damage estimated by urinary 8-hydroxydeoxyguanosine: influence of taxi driving,smoking and areca chewing

Nitrogen oxides (NOx) and polycyclic aromatic hydrocarbons are common air pollutants generated from automobile exhaust and cigarette smoke. This study was to investigate urinary 8-hydroxydeoxyguanosine (8-OHdG) as an effective biomarker on DNA damage from traffic exhaust and/or smoking in exposed and non-exposed individuals. With subject consents, the levels of plasma NOx, urinary 1-hydroxypyrene (1-OHP) and 8-OHdG were determined for 95 male taxi drivers and 75 male community residents as the reference group. After adjusting for associate variables, there was a significant correlation between the levels of urinary 8-OHdG and 1-OHP but not NOx. The average level of urinary 8-OHdG was significantly higher in drivers than in community men (13.4+/-4.7 vs. 11.5+/-4.7 microg/g creatinine in mean+/-standard deviation). Compared with non-smoking community men, the multivariate logistic regression showed that the odds ratios (OR) of having elevated levels of urinary 8-OHdG (greater than the overall median value, 12.1 microg/g creatinine) were 6.6 (95% confidence interval (CI)=2.1-20.8) for smoking community men, 5.0 (95% CI=1.7-14.7) for non-smoking taxi drivers and 4.6 (95% CI=1.4-15.0) for smoking taxi drivers. Higher risk was also observed for areca quid chewers compared with non-chewers (OR=1.6; 95% CI=1.1-3.6). In conclusion, taxi driving and smoking may contribute independently to elevated DNA damage using urinary 8-OHdG levels as a sensitive biomarker. This effect is most potent on heavy smokers.     

Ozone disintegration of excess biomass and application to nitrogen removal.

A pilot-scale facility integrated with an ozonation unit was built to investigate the feasibility of using ozone-disintegration byproducts of wasted biomass as a carbon source for denitrification. Ozonation of biomass resulted in mass reduction by mineralization as well as by ozone-disintegrated biosolids recycling. Approximately 50% of wasted solids were recovered as available organic matter (ozonolysate), which included nonsettleable microparticles and soluble fractions. Microparticles were observed in abundance at relatively low levels of ozone doses, while soluble fractions became dominant at higher levels of ozone doses in ozone-disintegrated organics. Batch denitrification experiments showed that the ozonolysate could be used as a carbon source with a maximum denitrification rate of 3.66 mg nitrogen (N)/g volatile suspended solids (VSS) x h. Ozonolysate was also proven to enhance total nitrogen removal efficiency in the pilot-scale treatment facility. An optimal chemical oxygen demand (COD)-to-nitrogen ratio for complete denitrification was estimated as 5.13 g COD/g N. The nitrogen-removal performance of the modified intermittently decanted extended aeration process dependent on an external carbon supply could be described as a function of solids retention time.     

Adsorption of arsenic(V) by activated carbon prepared from oat hulls

The efficiency of self-manufactured activated carbon (AC) produced from oat hulls in adsorbing arsenic(V) was tested in a batch reactor. The results indicated that the adsorptive capacity of AC was affected by initial pH value, with adsorption capacity decreasing from 3.09 to 1.57 mg As g(-1) AC when the initial pH values increased from 5 to 8. A modified linear driving force model conjugated with a Langmuir isotherm was created to describe the study's kinetics. The test results show that rapid adsorption and slow adsorption exist simultaneously when AC is used to remove arsenic(V).     

Visibility trends in Korea during the past two decades

Temporal trends and spatial distributions of visibility measured by the human eye over 60 stations in Korea between 1980 and 2000 are analyzed and discussed. Generally, visibility is lowest on winter mornings and highest on summer afternoons throughout Korea. Visibility in Seoul is now in an increasing trend while it has decreased nationwide, especially in clean coastal areas. Spatial distribution of visibility in the 1990s was related negatively to that of relative humidity (RH). However, visibility generally decreased despite an overall decrease in RH throughout the country. Air pollutants should have played a role in this dissonant variation, particularly in relatively clean areas and on summer afternoons. It was interpreted that the visibility increase in major metropolitan areas, including the greater Seoul area, in the 1990s was caused mainly by the reduction in pollutant emissions by rigorous government policy. But the effect of the emission reduction was manifested with decreasing RH.     

Reduced viability of F1 egg ropes in Chironomus riparius exposed to di-2-ethylhexyl phthalate (DEHP)

The midge (Chironomus riparius), an aquatic invertebrate, was exposed to di-2-ethylhexyl phthalate (DEHP) to evaluate the effects on reproductive processes via sediment toxicity. The test endpoints included emergence, sex ratio, fecundity and viability of F1 offspring egg ropes. After exposures of C. riparius to DEHP in this study, a significant result was observed only in the viability test of F1 egg ropes. That is, hatching rates of F1 egg ropes from DEHP exposed adults were decreased significantly. This result provides the evidence that DEHP could lead abnormal egg ropes development by DEHP exposure during larval period. This means that DEHP could effect to Chironomus population density through reduced F1 offspring.     

Photocatalytic degradation of volatile organic compounds at the gas-solid interface of a TiO2 photocatalyst

In the present work, photocatalytic degradation of volatile organic compounds including gas-phase trichloroethylene (TCE), acetone, methanol and toluene over illuminated TiO2 was closely examined in a batch photoreactor as a function of water vapor, molecular oxygen and reaction temperature. Water vapor enhanced the photocatalytic degradation rate of toluene, but was inhibitive for acetone, and, there was an optimum water vapor concentration in the TCE and methanol removal. In a nitrogen atmosphere, it showed lower photocatalytic degradation rate than in air and pure oxygen. Thus, it could be concluded that oxygen is an essential component in photocatalytic reactions by trapping photogenerated electrons on the semiconductor surface and by decreasing the recombination of electrons and holes. As for the influence of reaction temperature, it was found that photocatalytic degradation was more effective at a moderate temperature than at an elevated temperature for each compound.     

Remediation of arsenic-contaminated soils and washing effluents

Laboratory experiments were conducted to determine the distribution of various arsenic species in tailings and soils. Other specific goal of the tests were to evaluate the extraction efficiency of arsenic using alkaline or acid washing, to determine optimum operational parameters of alkaline washing, and to evaluate the arsenic precipitation of washing effluents by pH adjustment or ferric chloride addition. Alkaline washing using sodium hydroxide was found to be favorable in removing arsenic from tailings or soils having a higher portion of arsenic in the operationally defined crystalline mineral fraction of crystalline oxide and amorphous aluminosilicates. This is due to the ligand displacement reaction of hydroxyl ions with arsenic species and high pH conditions that can prevent readsorption of arsenic because predominant negatively charged crystalline oxides do not attract the negatively charged oxyanions. For tailings, sodium hydroxide had 10-20 times higher extraction efficiencies than hydrochloric- or citric acid. The optimum concentration of sodium hydroxide for soil washing was determined to be 200 mM for all samples, while the optimum ratios were 10:1 and 5:1 for tailings and field/river sedimentary soils, respectively. The washing effluent of river soil was effectively treated by adjusting pH to 5-6 with hydrochloric acid, resulting in arsenic concentrations of <50 microgl(-1). In the case of field soil effluent, an addition of ferric chloride with a minimum mass ratio of 11 (Fe/As) was needed to reduce the arsenic below 50 microgl(-1).