Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Synthesis of Molecular Imprinting Polymers Separating Toluic Acid Isomers (II)

Polymers that can separate toluic acid isomers were synthesized by molecular imprinting technique. Molecular imprinting polymers (MIPs) for each isomer of toluic acids (TA) were synthesized using styrene and 4-vinylpyridine (4-Vpy). The adsorption characteristics of TA isomers, salicylic acid (SA), and benzoic acid (BA) on each MIP were investigated. The materials used for polymerization of TA isomers MIPs were adsorbed relatively well. This verifies that the MIPs which can adsorb template selectively were synthesized. In addition, the quantities of adsorbed TA isomers on the TA isomers MIPs and on the control polymer polymerized without template were compared and discussed. The variation of adsorption ability for MIPs with repeated use was investigated, showing excellent reproducibility.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Degradation of PVC Containing Mixtures in the Presence of HCl Fixators

Degradation of a model polymer mixture (PVC/PS/PE) and a waste polymer mixture in the presence of HCl fixators (Red Mud, precipitated CaCO₃ and dolamite) was studied using thermal gravimetric analysis (TGA) and a cycled-spheres-reactor. The experiments in cycled-spheres reactor model were performed by stepwise pyrolysis. Liquid products and HCl from each step were collected separately. For the model polymer mixture, the precipitated CaCO₃ showed the best effect on the fixation of evolved HCl and the reduction of chlorine content in the liquid products whereas RM yielded the best result for the waste polymer mixture. In addition, using HCl fixator also affected the degradation of both types of polymer mixture, leading to the formation of more gaseous and less residue.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

Comparisons of pastoralists perceptions about rangeland resource utilisation in the Middle Awash Valley of Ethiopia

Pastoralism is the most dominant land use form in the arid rangelands of Sub-Saharan Africa, but this rangeland-based lifestyle is under threat. As a consequence a study was conducted in the Middle Awash Valley of Ethiopia with the main objectives of assessing and comparing the broad perceptions of two pastoral groups (the Oromo ethnic group living in Kereyu-Fantale and the Afar ethnic group living in Awash-Fantale) on the usage of the existing rangeland resources, and their views on constraints and possible solutions. Data were collected from 90 Oromo and 55 Afar households. Despite the difference in ethnicity both of these groups share common problems. They derive their main income from the sale of animals and animal products, but with the difference that milk products rank first in the case of the Afar and last in the case of the Oromo. Both pastoral groups depend heavily on native grasses for animal feed and to a lesser extent on woody plants as a source of browse. The majority of respondents were of the opinion that the condition of the rangelands is poor, mainly due to overgrazing, droughts and increases in the human population. Availability of water is also regarded as a problem, mainly by the Oromo. Migration is the first measure taken to solve shortages of livestock feed, but many of the pastoralists replied that migration is an undesirable practise which is mostly done out of necessity. Because of the limited resources most respondents of both groups still prefer communal land tenure where resources are shared. It is concluded that the problems facing the pastoralists in the Middle Awash Valley have been created over many years and the solutions will also require time. With the current approach of the communal grazing systems, sustainable utilisation of the rangeland ecosystem is not possible. Solutions to the poor condition of the existing rangelands will require a definite commitment and full participation not only of the pastoralists, but also of government and non-governmental organisations that are directly or indirectly involved in rangeland resources utilisation, management, conservation and other related activities.     

Application of micrometeorological approaches to measure methane exchange in a dry paddy field in the western coast of Korea

The exchange processes of CH₄ were investigated in a paddy field in the Hari area of Kang Hwa Island over an 8 day period in late April 2002. The quantification of CH₄ fluxes was made under dry field condition of early spring by concurrently measuring its concentrations (at the two heights of 1 and 5 m) and the relevant micrometeorological parameters. To help elucidate the factors determining the mobilization characteristics of CH₄, the results of our measurement data were examined using a number of approaches. The results of the trajectory analysis indicated that its concentration changed very sensitively with the influence of different source types, as seen from the air mass movement patterns. The concentrations and fluxes of methane, when examined over this short-term scale, showed moderately strong patterns across 24 h period in which higher values tend to occur during morning or evening. The overall results of our field measurements suggest that CH₄ exchange processes in the paddy area proceeded in a fairly complicated manner. The study area behaved as a net source of CH₄ to the atmosphere with a net daily emission rate of 3.6 mg m⁻² despite the fact that downward deposition was observed more frequently than upward emission.     

Comparative study of responses in four Datura species to a zinc stress

The effects of zinc toxicity on the growth and the photosynthetic activities of four Datura species (Datura metel, Datura innoxia, Datura sanguinea, Datura tatula) were studied using various ZnSO4 concentrations (0, 1, 2.5 and 5 mM) added in the Coic Lessaint solution. Growth, photosynthesis, chlorophyll fluorescence and chlorophyll concentration were measured after 20 days of zinc stress. These parameters were severely reduced by this heavy metal. The zinc excess involves the stomate closing, the increase of CO2 concentration in the leaves, the inhibition of certain enzyme of the Calvin cycle, a degradation of photosystem and the chlorophyll decomposition. These phenomena allow the decrease of the net photosynthesis to be partially explained. These key parameters to assess photosynthetic performance allow the plants to be classified according to their resistance to zinc. Compared with the three other species, D. innoxia showed a very strong capacity to protect itself against toxic zinc concentrations; a large amount of ZnSO4 (5 mM) was required to inhibit 43% of the photosynthesis.     

The exceedance patterns of air quality criteria: a case study of ozone and nitrogen dioxide in Seoul, Korea between 1990 and 2000

In this study, the environmental behavior of two major airborne pollutants, ozone and nitrogen dioxide, was investigated with respect to their exceedance patterns of air quality criteria. For this purpose, we used data sets collected from a total of 31 air quality monitoring stations dispersed across the Seoul metropolitan city between 1990 and 2000. In the case of NO(2), the frequency of hourly exceedance data sets exhibited little changes in the early 90s. However, it increased dramatically after 1995, probably in compliance with a rapid increase in the total number of automobiles. Likewise, the daily exceedance of O(3) in the early 90s was not significant, approaching 100 cases (except in 1994). However, its total quantity began to surpass 300 cases since around 1996. Comparison of those exceedance data was also made among spatially divided data groups. In the case of NO(2), the occurrence of exceedance data was dominated by the western part of the city in both magnitude and frequency. On the other hand, that for O(3) was characterized by notably strong occurrences in the eastern counterpart. The overall results of our analysis of the NO(2) and O(3) exceedance data sets indicate an inextricable linkage between the two pollutants in association with geographical and meteorological factors.