Evaluation of Biopolymer-Modified Concrete Systems for Disposal of Cathode Ray Tube Glass

Abstract

Cathode ray tubes (CRTs) from computer monitors and television sets, which contain significantly high percentage of lead (Pb) by weight, represent an enormous and growing hazardous waste problem in the United States and worldwide. As a result, new technologies are needed to cope with current CRT waste stream and increased hazard and build new markets for its recycled components, developing commercially viable concrete composites, as well as minimizing CRT disposal problems. In this study, commercially available biopolymers, such as xan-than gum, guar gum, and chitosan, were used to encapsulate CRT glass waste, reducing the Pb leachability. The biopolymers utilized contain a number of useful functional groups, such as carboxyl (xanthan), hydroxyl (guar), and amino groups (chitosan), which play important roles in binding and stabilizing Pb onto concrete structures. The use of biopolymers in concrete systems can create a stable interpenetrating cross-linking composite that will last for many years. Results from these new composites show 30% higher compressive strength than standard concrete and a sharp decrease in lead leachability from several thousand milligrams per liter initially to an amount of three-tenths milligrams per liter or lower values (much lower than the U.S. Environment Protection Agency standard for hazardous waste of 5 mg/L by the toxicity characteristic leaching procedure test), and for some of the composites leachability is below even the standard for drinking water. This efficient and cost-effective CRT–biopolymer-concrete composite is a new class of biopolymer-modified material that can potentially perform a significant role in relieving the current CRT issue.     

A study on the evaluations of emission factors and uncertainty ranges for methane and nitrous oxide from combined-cycle power plant in Korea

In this research, in order to develop technology/country-specific emission factors of methane (CH₄) and nitrous oxide (N₂O), a total of 585 samples from eight gas-fired turbine combined cycle (GTCC) power plants were measured and analyzed. The research found that the emission factor for CH₄ stood at “0.82 kg/TJ”, which was an 18 % lower than the emission factor for liquefied natural gas (LNG) GTCC “1 kg/TJ” presented by Intergovernmental Panel on Climate Change (IPCC). The result was 8 % up when compared with the emission factor of Japan which stands at “0.75 kg/TJ”. The emission factor for N₂O was “0.65 kg/TJ”, which is significantly lower than “3 kg/TJ” of the emission factor for LNG GTCC presented by IPCC, but over six times higher than the default N₂O emission factor of LNG. The evaluation of uncertainty was conducted based on the estimated non-CO₂ emission factors, and the ranges of uncertainty for CH₄ and N₂O were between ?12.96 and +13.89 %, and ?11.43 and +12.86 %, respectively, which is significantly lower than uncertainties presented by IPCC. These differences proved that non-CO₂ emissions can change depending on combustion technologies; therefore, it is vital to establish country/technology-specific emission factors.     

Artificial and enhanced humification of soil organic matter using microwave irradiation

Microwave (MW) irradiation, a less energy-intensive irradiation technique, was employed to promote the changes in physicochemical properties of soil organic matter (SOM). MW was irradiated to forest soils for 10 min. Then, the physical and chemical properties of the SOM were analyzed with UV absorbance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis, and size exclusion chromatography. Also, the SOM was fractionated into biopolymer, fulvic acid, and humic acid, and each fraction was analyzed quantitatively. These analyses revealed that the SOM became more aromatic and nonpolar, highly condensed, and macromolecular organic substances that possess a higher amount of functional groups found in highly humified substances than the original SOM as a result of the MW irradiation. The humification-like alteration of SOM property was attributable to the thermal cracking and to the radical reaction, particularly when the MW was irradiated along with activated carbon under the aerobic condition. The results of this study suggest that the artificial and enhanced property changes of SOM can be accomplished by MW irradiation on an engineering time scale, which can contribute to the successful soil and groundwater remediation practice.     

Thermal Degradation and Kinetics of Alginate Polyurethane Hybrid Material Prepared from Alginic Acid as a Polyol

Alginate polyurethane hybrid materials are prepared by varying mole ratio of 2, 4-TDI as a di-isocyanate and alginic acid as a polyol in presence of dimethyl sulfoxide (DMSO) as a solvent. FT-IR and ¹³C one-dimensional (1D) solid state NMR (SSNMR) spectroscopy indicates that alginic acid is converted into alginate-polyurethane hybrid material via urethane linkage. Surface morphology of alginate-polyurethane hybrids changes by varying alginic acid: TDI ratio. The peak at near 221 °C in DSC thermogram of alginic acid (Alg) is shifted to higher temperature in alginate-polyurethane hybrid (Algpu1 and Algpu2). TGA study shows that alginate-polyurethane hybrid prepared using alginic acid: TDI = 1:1 (Algpu2) is more stable than alginic acid: TDI = 1:0.5 (Algpu1) at 300 °C. Kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive 1st order reactions. This study shows that thermal stability of alginate-polyurethane hybrid material was increased by adjusting mole ratio of 2, 4-TDI and alginic acid.     

Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Effect of pH and coexisting anions on removal of phosphate from aqueous solutions by inorganic-based mesostructures

This study investigated the effect of pH and the presence of coexisting (competitive) anions on the removal of phosphate by titanium mesostructures synthesized using do- or hexadecyltrimethylammonium bromide. To address these research objectives, experiments were conducted (1) under controlled initial pH values (2 to 10); and (2) through injection of nitrate, fluoride, chloride, or sulfate anions into a phosphate solution. Based on the experimental results, an initial of pH of 2 was found to be optimal for use of titanium mesostructures. The presence of fluoride anions in solution significantly decreased the removal efficiency of phosphate removal (3.56% at 3.95 mg/g). However, the addition of nitrate, chloride, and sulfate anions did not affect phosphate removal.     

Application of phosphate-solubilizing bacteria for enhancing bioavailability and phytoextraction of cadmium (Cd) from polluted soil

In this study, phosphate-solubilizing bacteria (PSB), Bacillus megaterium, were used to enhance Cd bioavailability and phytoextractability of Cd from contaminated soils. This strain showed a potential for directly solubilizing phosphorous from soils more than 10 folds greater than the control without inoculation. The results of pot experiments revealed that inoculation with B. megaterium significantly increased the extent of Cd accumulation in Brassica juncea and Abutilon theophrasti by two folds relative to the uninoculated control. The maximum Cd concentrations due to inoculation were 1.6 and 1.8 mg Cd g⁻¹ plant for B. juncea and A. theophrasti after 10 wk, respectively. The total biomass of A. theophrasti was not significantly promoted by the inoculation treatment, yet the total biomass of B. juncea increased from 0.087 to 0.448 g. It is also worth to mention that B. juncea predominantly accumulates Cd in its stems (39%) whereas A. theophrasti accumulates it in its leaves (68%) after 10 wk. The change of the Cd speciation indicated that inoculation of B. megaterium as PSB increased the bioavailabilty of Cd and consequently enhanced its uptake by plants. The present study may provide a new insight for improving phytoremediation using PSB in the Cd-contaminated soils.     

Does the stress tolerance of mixed grassland communities change in a future climate? A test with heavy metal stress (zinc pollution)

Will species that are sensitive/tolerant to Zn pollution still have the same sensitivity/tolerance in a future climate? To answer this question we analysed the response of constructed grassland communities to five levels of zinc (Zn) supply, ranging from 0 to 354 mg Zn kg⁻¹ dry soil, under a current climate and a future climate (elevated CO₂ and warming). Zn concentrations increased in roots and shoots with Zn addition but this increase did not differ between climates. Light-saturated net CO₂ assimilation rate (A_sat) of the species, on the other hand, responded differently to Zn addition depending on climate. Still, current and future climate communities have comparable biomass responses to Zn, i.e., no change in root biomass and a 13% decrease of above-ground biomass. Provided that the different response of A_sat in a future climate will not compromise productivity and survival on the long term, sensitivity is not altered by climate change.     

Alternative antimicrobial compounds to control potential Lactobacillus contamination in bioethanol fermentations

Antibiotics are commonly used to control microbial contaminants in yeast-based bioethanol fermentation. Given the increase in antibiotic-resistant bacteria, alternative natural antimicrobials were evaluated against the potential contaminant, Lactobacillus. The effects of nisin, ?-polylysine, chitosan (CS) and lysozyme were screened against 5 Lactobacillus strains. A standard broth- microdilution method was used in 96-well plates to assess the minimal inhibitory concentration (MIC). L. delbrueckii subsp lactis ATCC479 exhibited maximal MICs with CS, ?-polylysine and nisin (1.87, 0.3125 and 0.05 mg/mL, respectively). Nisin reduced most Lactobacillus strains by 6 log CFU/mL after 48 hours with the exception of L. casei. Synergism occurred when ethylenediaminetetraacetic acid (EDTA) was added with nisin. An MIC of 0.4 mg/mL of nisin combined with the EDTA at an MIC of 1 mg/ml markedly suppressed L .casei by 6 log CFU/mL. In conclusion, alternative antimicrobials proved to be a potential candidate for controlling bacterial contamination in the fermentation process. Synergistic effect of nisin with EDTA successfully inhibited the nisin-resistant contaminant, L. casei.     

Levels and patterns of polycyclic aromatic hydrocarbons (PAHs) in soils after forest fires in South Korea

Introduction  

To investigate the influence of biomass burning on the levels of polycyclic aromatic hydrocarbons (PAHs) in soils, temporal trends and profiles of 16 US Environmental Protection Agency priority PAHs were studied in soil and ash samples collected 1, 5, and 9 months after forest fires in South Korea.