Dust emissions created by low-level rotary-winged aircraft flight over desert surfaces

There is a dearth of information on dust emissions from sources that are unique to U.S. Department of Defense testing and training activities. Dust emissions of PM₁₀ and PM_2.5 from low-level rotary-winged aircraft travelling (rotor-blade ≈7 m above ground level) over two types of desert surfaces (i.e., relatively undisturbed desert pavement and disturbed desert soil surface) were characterized at the Yuma Proving Ground (Yuma, AZ) in May 2007. Fugitive emissions are created by the shear stress of the outflow of high speed air created by the rotor-blade. The strength of the emissions was observed to scale primarily as a function of forward travel speed of the aircraft. Speed affects dust emissions in two ways: 1) as speed increases, peak shear stress at the soil surface was observed to decline proportionally, and 2) as the helicopter's forward speed increases its residence time over any location on the surface diminishes, so the time the downward rotor-generated flow is acting upon that surface must also decrease. The state of the surface over which the travel occurs also affects the scale of the emissions. The disturbed desert test surface produced approximately an order of magnitude greater emission than the undisturbed surface. Based on the measured emission rates for the test aircraft and the established scaling relationships, a rotary-winged aircraft similar to the test aircraft traveling 30 km h^?1 over the disturbed surface would need to travel 4 km to produce emissions equivalent to one kilometer of travel by a light wheeled military vehicle also traveling at 30 km h^?1 on an unpaved road. As rotary-winged aircraft activity is substantially less than that of off-road vehicle military testing and training activities it is likely that this source is small compared to emissions created by ground-based vehicle movements.     

An overview of effects of climate change on selected arctic freshwater and anadromous fishes

Arctic freshwater and diadromous fish species will respond to the various effects of climate change in many ways. For wide-ranging species, many of which are key components of northern aquatic ecosystems and fisheries, there is a large range of possible responses due to inter- and intra-specific variation, differences in the effects of climate drivers within ACIA regions, and differences in drivers among regions. All this diversity, coupled with limited understanding of fish responses to climate parameters generally, permits enumeration only of a range of possible responses which are developed here for selected important fishes. Accordingly, in-depth examination is required of possible effects within species within ACIA regions, as well as comparative studies across regions. Two particularly important species (Arctic char and Atlantic salmon) are examined as case studies to provide background for such studies.     

Sensitivities of Australian and New Zealand amphipods to copper and zinc in waters and metal-spiked sediments

The sensitivities of eight benthic amphipods, Chaetocorophium cf. lucasi, Corophium colo, Grandidierella japonica, Hyale crassicornis, Hyale longicornis, Melita awa, Melita matilda and Melita plumulosa, to copper and zinc in water-only and whole-sediment toxicity tests were compared. Whole-sediment tests used copper- (1300 mg/kg) and zinc- (4000 mg/kg) spiked sediments after equilibration for sufficient time to produce pore water and overlying water concentrations below the lowest observable effect concentrations of water-only exposures. Survival of adults (after 10 d) and juveniles (after 96 h), and the metal concentrations in the body tissues of adults, were determined at the end of the tests. Two epibenthic amphipods from the genus Melita were the most sensitive species to aqueous copper and zinc, with a 96-h LC50 value of 120 microg Cu/l for both M. awa and M. plumulosa juveniles, and a 96-h LC50 value of 640 microg Zn/l for juveniles of M. plumulosa. Juvenile amphipods (7-d old) were more sensitive than adult amphipods (>30-d old) in both water-only and whole-sediment tests, with adult-LC50/juvenile-LC50 ratios in water-only tests ranging from 1.2 to l.5 for copper and 1 to 1.4 for zinc. All species except C. colo, C. cf. lucasi and M. matilda were sensitive to the copper-spiked sediment, with survival between 14% and 74% of controls. Similarly, all species except C. colo and G. japonica, showed a response to the zinc-spiked sediment (26-81% of control survival). The epibenthic amphipods were more sensitive than the infaunal tube-dwelling amphipods and are recommended as test species.     

Walking when intoxicated: An investigation of the factors which influence individuals’ drink walking intentions

Annually, in Australia, 10-15% of all road-related fatalities involve pedestrians. Of those pedestrians fatally injured, approximately 45% were walking while intoxicated or ‘drink walking’. Drink walking is increasing in prevalence and younger persons may be especially prone to engage in this behaviour and, thus, are at heightened risk of being injured or killed. Presently, limited research is available regarding the factors which influence individuals to drink walk. This study explored young people’s (17-25 years) intentions to drink walk, using an extended Theory of Planned Behaviour (TPB). Participants (N = 215), completed a self-report questionnaire which assessed the standard TPB constructs (attitude, subjective norm, perceived behavioural control) as well as the extended constructs of risk perception, anticipated regret, and past behaviour. It was hypothesised that the standard TPB constructs would significantly predict individuals’ reported intentions to drink walk and that the additional constructs would predict intentions over and above the TPB constructs. The TPB variables significantly predicted 63.2% of the variance in individuals’ reported intentions to drink walk, and the additional variables, combined, explained a further 6.1% of the variance. Of the additional constructs, anticipated regret and past behaviour, but not risk perception, were significant predictors of drink walking intentions. As one of the first studies to provide a theoretically-based investigation of factors influencing individuals’ drink walking intentions, the current study’s findings have potentially significant implications for understanding young people’s decisions to drink walk and the design of future countermeasures to ultimately reduce this behaviour.     

Chemical characterization of synthetic soil from composting coal combustion and pharmaceutical by-products

Land application of coal combustion by-products (CCBs) mixed with solid organic wastes (SOWs), such as municipal sewage sludge, has become increasingly popular as a means of productively using what were once considered waste products. Although bulk chemical and physical properties of several of these CCB-SOW materials have been reported, detailed information about their synthesis and mineralogy of the CCB-SOW materials has not been reported. In this paper, chemical and mineralogical properties of a soil-like material obtained from composting a mixture of CCBs with a pharmaceutical fermentation by-product (FB) were investigated at the laboratory and field scale. All starting materials and products were characterized by X-ray diffraction (XRD), fourier transform infrared (FFIR) spectroscopy, and elemental analyses. The results showed that the FB was strongly bound to the CCBs and could not be removed by washing. Within 2 wk of the start of a composting study, there was a rapid drop in pH from 12 to 8, an increase in temperature to 70 degrees C, and a reduction in the dissolved oxygen content, attributed to the rapid establishment of a highly active microbial population. Composting produced a soil-like material with high levels of plant nutrients, a high nutrient retention capacity, and metal contents similar to median levels of those metals reported for soils. The levels of boron and soluble salts are such that sensitive plants may initially show toxicity symptoms. However, with adequate rainfall, leaching should rapidly remove most of the B and soluble salts. With care, the material produced is safe for use as a synthetic topsoil.     

Carbon Management Response Curves: Estimates of Temporal Soil Carbon Dynamics

Measurement of the change in soil carbon that accompanies a change in land use (e.g., forest to agriculture) or management (e.g., conventional tillage to no-till) can be complex and expensive, may require reference plots, and is subject to the variability of statistical sampling and short-term variability in weather. In this paper, we develop Carbon Management Response (CMR) curves that could be used as an alternative to in situ measurements. The CMR curves developed here are based on quantitative reviews of existing global analyses and field observations of changes in soil carbon. The curves show mean annual rates of soil carbon change, estimated time to maximum rates of change, and estimated time to a new soil carbon steady state following the initial change in management. We illustrate how CMR curves could be used in a carbon accounting framework while effectively addressing a number of potential policy issues commonly associated with carbon accounting. We find that CMR curves provide a transparent means to account for changes in soil carbon accumulation and loss rates over time, and also provide empirical relationships that might be used in the development or validation of ecological or Earth systems models.     

Development of Indicators to Assess Economic Vulnerabilities to Changes in Ecosystem Services: Case Study of Counties in Maryland,USA

We develop indicators showing the relative environmental burdens that human activities place on locales for a given level of economic benefits. The main purpose is to develop tools that allow us to examine the potential vulnerabilities within economies to changes in resource conditions. The indicators of pollution emission or resource consumption per job can be used to identify potential challenges to resource and industry managers and to compare areas in terms of their ability to adapt to change. For example, if a large number of area jobs are dependent on abundant water, this indicates a vulnerability to a reduction in water availability for industrial use. We develop a case study for 23 counties and 1 city in Maryland to examine the usefulness and limitations of the indicators. Our case study demonstrates that the indicators provide an informative view into patterns of local economic activity and use of an area’s environmental goods and services. In contrast to patterns for total environmental burdens (e.g., total SO₂ emissions) that are typically reported, the rates of environmental burden per job are not simply correlated with high or low economic output. Thus, the indicators represent distinct patterns of environmental burdens per job that reflect reliance on environmental services. The indicators have some limitations when used at this fine scale because they can misrepresent conditions in counties in which economic sectors are dominated by one or a few businesses. For this reason, the indicators are best used as a regional screening tool.     

Impact of soil amendments on reducing phosphorus losses from runoff in sod

Received for publication December 22, 2004. Research was initiated to study the interaction between soil amendments (lime, gypsum, and ferrous sulfate) and dissolved molybdate reactive phosphorus [RP(<0.45)] losses from manure applications from concentrated runoff flow through a sod surface. Four run-over boxes (2.2-m2 surface area) were prepared for each treatment with a bermudagrass [Cynodon dactylon (L.) Pers.] sod surface (using sod blocks) and composted dairy manure was surface-applied at rates of 0, 4.5, 9, or 13.5 Mg ha-1. The three soil amendments were then applied to the boxes. Two 30-min runoff events were conducted and runoff water was collected at 10-min intervals and analyzed for RP(<0.45). Results indicated that the addition of ferrous sulfate was very effective at reducing the level of RP(<0.45). in runoff water, reducing RP(<0.45) from 1.3 mg L(-1) for the highest compost rate with no amendment to 0.2 mg L(-1) for the ferrous sulfate in the first 10 min of runoff. Lime and gypsum showed a small impact on reducing RP(<0.45), with a reduction in the first 10 min to 0.9 and 0.8 mg L(-1), respectively. The ferrous sulfate reduced the RP(<0.45) in the tank at the end of the first runoff event by 66.3% compared with no amendment. In the second runoff event, the ferrous sulfate was very effective at reducing RP(<0.45) in runoff, with no significant differences in RP(<0.45) with application of 13.5 Mg ha(-1) compost compared with no manure application. The results indicate that the addition of ferrous sulfate may greatly reduce RP(<0.45) losses in runoff and has considerable potential to be used on pasture, turfgrass, and filter strips to reduce the initial RP(<0.45) losses from manure application to the environment.     

Head injuries in airbag-equipped motor vehicles with special emphasis on AIS 1 and 2 facial and loss of consciousness injuries

OBJECTIVES: Safety of the airbag supplemental restraint system (airbag) is a well-known concern. Although many lives are saved each year through airbag use, injuries continue to occur, especially to the head. Airbag safety research has focused primarily on severe injuries, while minor and moderate injuries have been largely ignored. METHODS: In this study, 205,977 injury cases from the 1995 to 2001 National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) were surveyed to determine the prevalence of AIS 1 and 2 facial and brain loss of consciousness (LOC) injuries and determine if these injuries are a concern. The query was focused on frontal impacts in vehicles equipped with airbags. Only occupants wearing appropriate seatbelts were included in this study so that the airbag would provide occupant protection under optimal conditions. Of the 205,977 injury cases studied, 2.4% met this criterion. RESULTS: From the data gathered, the trends seem to indicate an increase in these specific injuries, both in terms of the total number and the proportion to all injury cases. In 1995, AIS 1 and 2 head injuries accounted for 96.5% of all head injuries caused by airbags. By 2001, the percentage had risen 3.0% to 99.5%. Injuries occurring in vehicles equipped with first-generation versus second generation airbags were compared, and data seem to suggest that there is a higher rate of minor and moderate head injuries when occupants are in second-generation airbag-equipped vehicles, even when appropriate lap and shoulder belts are used. CONCLUSIONS: The short timeframe surveyed prevents drawing meaningful conclusions about statistical significance, but the graphical representations of the data in this study underscore an urgent need for further investigation based on current trends in order to understand the issue of minor and moderate head injury prevention in regard to airbags.     

Mercury body burdens in Gambusia holbrooki and Erimyzon sucetta in a wetland mesocosm amended with sulfate

This study used an experimental model of a constructed wetland to evaluate the risk of mercury methylation when the soil is amended with sulfate. The model was planted with Schoenoplectus californicus and designed to reduce copper, mercury, and metal-related toxicity in a wastestream. The sediments of the model were varied during construction to provide a control and two levels of sulfate treatment, thus allowing characterization of sulfate's effect on mercury methylation and bioaccumulation in periphyton and two species of fish--eastern mosquitofish (Gambusia holbrooki) and lake chubsucker (Erimyzon sucetta). After one year in the experimental model, mean dry-weight normalized total mercury concentrations in mosquitofish from the non-sulfate treated controls (374+/-77 ng/g) and the reference location (233+/-17 ng/g) were significantly lower than those from the low and high sulfate treatments (520+/-73 and 613+/-80 ng/g, respectively). For lake chubsucker, mean total mercury concentration in fish from the high sulfate treatment (276+/-63 ng/g) was significantly elevated over that observed in the control (109+/-47 ng/g), the low sulfate treatment (122+/-42 ng/g), and the reference population (41+/-2 ng/g). Mercury in periphyton was mostly inorganic as methylmercury ranged from 6.6 ng/g (dry weight) in the control to 9.8 ng/g in the high sulfate treatment, while total mercury concentrations ranged from 1147 ng/g in the control to a high of 1297 ng/g in the low sulfate treatment. Fish methylmercury bioaccumulation factors from sediment ranged from 52 to 390 and from 495 to 3059 for water. These results suggest that sulfate treatments add a factor of risk due to elevated production of methylmercury in sediment and porewater which biomagnified into small fish, and may potentially increase through the food web.