Selection of microalgae species based on their lipid content,fatty acid profile and apparent fuel properties for biodiesel production

Environmental Science and Pollution Research - Different microalgae species produce varying quantity and quality of the lipids. Fatty acid methyl ester composition, which comprises both saturated...     

Risk assessment of trace metals in an extreme environment sediment: shallow,hypersaline, alkaline,and industrial Lake Acıgöl,Denizli, Turkey

The major and trace element component of 48 recent sediment samples in three distinct intervals (0–10, 10–20, and 20–30 cm) from Lake Ac?göl is described to present the current contamination levels and grift structure of detrital and evaporate mineral patterns of these sediments in this extreme saline environment. The spatial and vertical concentrations of major oxides were not uniform in the each subsurface interval. However, similar spatial distribution patterns were observed for some major element couples, due mainly to the detrital and evaporate origin of these elements. A sequential extraction procedure including five distinct steps was also performed to determine the different bonds of trace elements in the <?60-μ particulate size of recent sediments. Eleven trace elements (Ni, Fe, Cd, Pb, Cu, Zn, As, Co, Cr, Al and Mn) in nine surface and subsurface sediment samples were analyzed with chemical partitioning procedures to determine the trace element percentage loads in these different sequential extraction phases. The obtained accuracy values via comparison of the bulk trace metal loads with the total loads of five extraction steps were satisfying for the Ni, Fe, Cd, Zn, and Co. While, bulk analysis results of the Cu, Ni, and V elements have good correlation with total organic matter, organic fraction of sequential extraction characterized by Cu, As, Cd, and Pb. Shallow Lake Ac?göl sediment is characteristic with two different redox layer a) oxic upper level sediments, where trace metals are mobilized, b) reduced subsurface level, where the trace metals are precipitated.     

Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

Novel bacterial consortia isolated from plastic garbage processing areas demonstrated enhanced degradation for low density polyethylene

Environmental Science and Pollution Research - This study aimed to formulate novel microbial consortia isolated from plastic garbage processing areas and thereby devise an eco-friendly approach for...     

Chemical transport models

Background, aim, and scope  Improving the parameterization of processes in the atmospheric boundary layer (ABL) and surface layer, in air quality and chemical transport models. To do so, an asymmetrical, convective, non-local scheme, with varying upward mixing rates is combined with the non-local, turbulent, kinetic energy scheme for vertical diffusion (COM). For designing it, a function depending on the dimensionless height to the power four in the ABL is suggested, which is empirically derived. Also, we suggested a new method for calculating the in-canopy resistance for dry deposition over a vegetated surface. Materials and methods  The upward mixing rate forming the surface layer is parameterized using the sensible heat flux and the friction and convective velocities. Upward mixing rates varying with height are scaled with an amount of turbulent kinetic energy in layer, while the downward mixing rates are derived from mass conservation. The vertical eddy diffusivity is parameterized using the mean turbulent velocity scale that is obtained by the vertical integration within the ABL. In-canopy resistance is calculated by integration of inverse turbulent transfer coefficient inside the canopy from the effective ground roughness length to the canopy source height and, further, from its the canopy height. Results  This combination of schemes provides a less rapid mass transport out of surface layer into other layers, during convective and non-convective periods, than other local and non-local schemes parameterizing mixing processes in the ABL. The suggested method for calculating the in-canopy resistance for calculating the dry deposition over a vegetated surface differs remarkably from the commonly used one, particularly over forest vegetation. Discussion  In this paper, we studied the performance of a non-local, turbulent, kinetic energy scheme for vertical diffusion combined with a non-local, convective mixing scheme with varying upward mixing in the atmospheric boundary layer (COM) and its impact on the concentration of pollutants calculated with chemical and air-quality models. In addition, this scheme was also compared with a commonly used, local, eddy-diffusivity scheme. Simulated concentrations of NO₂ by the COM scheme and new parameterization of the in-canopy resistance are closer to the observations when compared to those obtained from using the local eddy-diffusivity scheme. Conclusions  Concentrations calculated with the COM scheme and new parameterization of in-canopy resistance, are in general higher and closer to the observations than those obtained by the local, eddy-diffusivity scheme (on the order of 15–22%). Recommendations and perspectives  To examine the performance of the scheme, simulated and measured concentrations of a pollutant (NO₂) were compared for the years 1999 and 2002. The comparison was made for the entire domain used in simulations performed by the chemical European Monitoring and Evaluation Program Unified model (version UNI-ACID, rv2.0) where schemes were incorporated.     

Development of simple and sensitive spectrophotometric method for the determination of bendiocarb in its formulations and environmental samples

Facile, selective and sensitive spectrophotometric method has been developed for the determination of bendiocarb in its insecticidal formulations, fortified water, food grains, agriculture wastewater and agriculture soil samples with prepared reagents. The method was based on alkaline hydrolysis of the bendiocarb pesticide, and the resultant hydrolysis product of bendiocarb was coupled with 2,6-dibromo-4-methylaniline to give a yellow color product with λmaxof457 nmorcouplingwith2, 6−dibromo−4−nitroanilinetoproducearedcoloredproductwithλ_max of474~nmorcouplingwith2, 4, 6−tribromoanilinetoformorangeredcoloredproducthasaλ_max of465 nm.Underoptimalconditions, Beer'slawrangefor2, 6−dibromo−4−methylaniline(DBMA)wasfoundtobe0.6−−14.0~μgmL ^-1, 0.8−−10.0 μgmL ^-1 for2, 6−dibromo−4−nitroaniline(DBNA)and0.4−−10.0 μgmL ^-1 for2, 4, 6−tribromoaniline(TBA).Themolarabsorptivityofthecolorsystemswerefoundtobe4.126~×~10⁴ lmol ^-1 cm ^-1 forDBMA, 3.254×10⁴ l~mol ^-1 cm ^-1 forDBNAand2.812×10⁴ lmol ^-1 cm ^-1 forTBA.Sandell'softhecolorreactionsare0.018 μgcm ^-2(DBMA), 0.052 μgcm ^-2(DBNA)and0.065 μgcm ^-2$ (TBA) respectively. The effect of the non-target species on the determination of bendiocarb was studied. The formation of colored derivatives with the coupling agents is instantaneous and stable for 18 h, 30 h, and 12 h. Performance of the proposed methods were compared statistically in terms Student's F and t-tests with the reported methods.     

Fate of carbosulfan and monocrotophos in sandy loam soils of Pakistan under field conditions at different watertable depths

Information regarding pesticide mobility is critical for the evaluation of pesticide management practices. For this purpose, lysimetric studies were conducted to develop assessment schemes to protect groundwater from unacceptable effects caused by pesticide use. By using these studies, specific monitoring actions and prevention measures for the protection of waters can be studied, and the results thus obtained can provide the local authorities and the decision makers with an identification tool for demarcating risk areas. Pesticide residues were found at the bottom of lysimeters in the following pattern i.e., 1.52 > 2.1 > 2.74 m which could represent an "index of risk" for groundwater pollution. Regressions built for carbofuran and monocrotophos against watertable depths showed a decreasing trend of pesticide in higher watertable treatments. These findings support the existence of a significant role for chromatographic flow in sandy texture soil. Moreover, the higher values of pesticide residue at the bottom of lysimeters reflect that chromatographic flow as well as preferential flow pattern prevails during higher precipitation events. The precipitation received during the study was higher than the 10 year average and can be considered relatively as a worst case scenario. Finally, the authors have recommended a standardized pesticide monitoring scheme for groundwater in accordance with the already validated generic schemes in developed countries.     

Lead availability and phytoextraction in the rhizosphere of Pelargonium species

Environmental Science and Pollution Research - Availability of lead (Pb) in soil is a major factor controlling the phytoremediation efficiency of plants. This study was focused on investigating the...     

Pesticides exposure in Pakistan: a review

This is the first systematic review of studies done since 1960, and to give an integrated picture of pesticides exposure to humans, animals, plants, waters, soils/sediments, atmosphere etc. in Pakistan. Authors have extracted data from different departments, published literature in research journals and National reports. Although the wide-spread usage of pesticides in Pakistan has controlled the pests, but like other countries, it has started causing environmental problems in the area. In some areas of Punjab and Sindh groundwater has been found contaminated and is constantly being under the process of contamination due to pesticide use. There is considerable evidence that farmers have overused and misused pesticides especially in cotton-growing areas. It is evident from the biological monitoring studies that farmers are at higher risk for acute and chronic health effects associated with pesticides due to occupational exposure. Furthermore, the intensive use of pesticides (higher sprays more than the recommended dose) in cotton areas involves a special risk for the field workers, pickers, and of an unacceptable residue concentration in cottonseed oil and cakes. The authors have also discussed the merits and demerits of different studies. The review will set the future course of action of different studies on pesticide exposure in Pakistan. Data limitations are still the major obstacle towards establishing clear environmental trends in Pakistan. The authors suggest that a reliable monitoring, assessment and reporting procedures shall be implemented in accordance with appropriate environmental policies, laws and regulations in order to minimize the pesticides exposure.     

Facile and Sensitive Spectrophotometric Determination of Carbosulfan in Formulations and Environmental Samples

Facile, selective and sensitive spectrophotometric method has been developed for the determination of carbosulfan in insecticidal formulations, fortified water, food grains, agriculture wastewater and soil samples with newly synthesized reagents. The method was based on acid and alkaline hydrolysis of the carbosulfan pesticide, and the resultant hydrolysis product of carbosulfan was coupled with 2,6-dibromo-4-methylaniline to give a yellow color product with λ _max of 464 nm or interaction with 2,6-dibromo-4-nitroaniline to produce yellow colored product with λ _max of 408 nm or coupling with 2,4,6-tribromoaniline to form red colored product has a λ _max of 471 nm. Under optimal conditions, Beer’s law range for 2,6-dibromo-4-methylaniline (DBMA) was found to be 0.2–12.0 μg ml⁻¹, 0.6–16.0 μg ml⁻¹ for 2,6-dibromo-4-nitroaniline (DBNA) and 0.4–15.0 μg ml⁻¹ for 2,4,6-tribromoaniline (TBA). The molar absorptivity of the color systems were found to be 3.112 × 10⁴ l mol⁻¹ cm⁻¹ for DBMA, 3.214 × 10⁴ l mol⁻¹ cm⁻¹ for DBNA and 3.881 × 10⁴ l mol⁻¹ cm⁻¹ for TBA. Sandell’s of the color reactions are 0.013 μg cm⁻² (DBMA), 0.012 μg cm⁻² (DBNA) and 0.011 μg cm⁻² (TBA) respectively. The effect of the non-target species on the determination of carbosulfan was studied to enhance the selectivity of the proposed methods. The formation of colored derivatives with the coupling agents is instantaneous and stable for 28, 30, and 26 h. Performance of the proposed methods were compared statistically in terms Student’s F and t-tests with the reported methods. An erratum to this article can be found at