A Microcosm Approach to the Detection of the Effects of Herbicide Spray Drift in Plant Communities

It is often difficult to measure and predict the impacts of toxic chemicals, such as herbicides, on natural communities. This is especially true under conditions of spray drift when the amount received by the organisms downwind from the sprayer may be at sub-lethal doses. Laboratory experiments are either artificial, or have not been generally carried out over long enough time periods, to be realistic. Field experiments are often difficult because of the high variability inherent in natural populations. Here an intermediate microcosm approach was used, where standardized artificial communities (eight dicotyledons with and without a grass) were tested. The artifical communities included species typical of British woodland margins, hedgerows and field margins; communities with a high conservation interest, yet potentially under threat from spray drift. The microcosms were placed downwind of a sprayer and exposed to one of the following herbicides: glyphosate, mecoprop and MCPA. This approach ensures that the communities were standardized at the start and have been exposed to realistic doses of herbicide. The experiments reported here were carried out for at least three years with exposures to herbicides repeated each year. The effects of differential herbicide exposure downwind of the sprayer were measured on species yield, flowering performance, seed production, seed viability and invasion by new species. Responses were extremely variable, but all species showed some effects in some years. Some patterns emerged. For example, one group of species appeared to be more successful near to the sprayer. This was particularly true of the grass when exposed to MCPA and mecoprop. The performance of most species was reduced under the sprayer, and there was a general recovery with increasing distance downwind. A few species showed increased performance in the intermediate downwind zone (2–4 m) and this may be due to a hormonal effect on growth processes, or an effect of reduced interference from other community members. Generally, there were few effects on seed production or seed viability. An important result was that most effects were confined within an 8 m zone, as there were few significant differences between plants exposed at 8 m and those untreated. Although damaging effects were found in the immediate downwind zone from the sprayer, the restriction of effects to 8 m suggests that a buffer zone of this size would be adequate to protect sensitive habitats from most deleterious impacts on community processes.     

The feasibility of processing lead-based paint abatement wastes through primary and secondary lead smelters

This study was undertaken to determine the feasibility of processing soil and lead-based paint (LBP) abatement waste through primary and secondary lead smelting facilities. The main objectives were to determine the compatibility of soil and LBP abatement waste with lead smelting circuits; the costs associated with transporting and processing the abatement waste through a smelter; and a review of major environmental laws or regulations which may impact the lead smelting industry's ability to carry out this process. While not all categories of LBP wastes are suited for reclamation through lead smelters, sufficient classes are to make the effort worthwhile. Specifically, lead paint chips, dusts, heatgun sludge, soils and certain blasting abrasives appear metallurgically compatible with the lead smelting circuits. Additionally, there do not appear to be any current regulatory statutes that forbid the process from being carried out, so long as certain permit modifications are obtained. Finally, the estimated smelting costs seem to compare favourably with current treatment and disposal fees at approved landfills. However, despite the promise of these initial findings, a great deal of work remains to be done if the concept of processing lead paint wastes through lead smelters for reclamation is to become a reality.     

Effects of kelthane on the estuarine shrimp Crangon tranciscorum

The chlorinated hydrocarbon pesticide Kelthane was assayed for effects on food consumption, molting rate, cannibalism, respiration, mortality and behavior of the estuarine shrimp Crangon franciscorum Stimpson. The test system was a single-pass pulse-flow apparatus employing a modified Mount-Brungs style diluter. Treatment levels were 0, 14, 33 and 81 g l^-1 Kelthane at 16.6°C and 19 S over an exposure period of 317 h. Exposure to Kelthane reduced food consumption, molting rate, cannibalism, and respiration. Behavior also was abnormal in exposed shrimp. They spent more time swimming, were less coordinated and had feeble escape reactions. Kelthane was very toxic to C. franciscorum with LT₅₀ values of 163, 196 and 264 h for shrimp exposed to 81, 33 and 14 g l^-1 respectively. The incipient lethal level of Kelthane is probably below 14 g l^-1.     

Population-level effects of augmented herbivory on Lespedeza cuneata: implications for biological control.

Invasive species pose significant ecological costs, and therefore successful management techniques are important. One commonly employed method is biological control. The success of biological control depends largely on whether additional inflicted damage can successfully reduce the fitness and population growth rate of a target species. Here, we simulate herbivory on the invasive Lespedeza cuneata and create stage-structured projection models to determine if augmented herbivory by a leaf-chewing biological control agent would regulate the population growth rate of this species. We found that augmented herbivory influenced stage transitions of plants in the smallest stage class, causing higher mortality and reduced growth. No other effect was found on stage transitions or fecundities, despite manipulation of herbivory at exceptionally high levels (up to 80% leaf loss). None of the clipping treatments significantly reduced the population growth rate of L. cuneata. We conclude that biological control by a leaf chewing herbivore would not likely be successful, even if an exceptionally large amount of each plant were consumed. We suggest that this approach, a combination of simulated herbivory and demographic modeling, will provide essential information for understanding the utility of biological control to curb the population growth of invasive plant species.     

Counting of visitors in the Meijendel dunes, The Netherlands

Accurate and sufficiently detailed information about recreation-related use of dune areas is necessary for their management. Long-term monitoring can provide this information. This paper presents the visitor counting programme used in the Meijendel dune area since 1992. The data collected during the first ten years are used to evaluate the method. The combination of mechanical vehicle counts and additional visual counts proved to be reliable and produced an accurate data set. Costs could be reduced through eventually reducing the number of counting locations and limiting the number of visual counts.     

Anaerobic decomposition of halogenated aromatic compounds

Halogenated compounds constitute one of the largest groups of environmental pollutants, partly as a result of their widespread use as biocides, solvents and other industrial chemicals. A critical step in degradation of organohalides is the cleavage of the carbon?halogen bond. Reductive dehalogenation is generally the initial step in metabolism under methanogenic conditions, which requires a source of reducing equivalents, with the halogenated compound serving as an electron acceptor. Dehalogenation is greatly influenced by alternate electron acceptors; e.g. sulfate frequently inhibits reductive dehalogenation. On the other hand, a number of halogenated aromatic compounds can be degraded under different electron-accepting conditions and their complete oxidation to CO(2) can be coupled to processes such as denitrification, iron(III)-reduction, sulfate reduction and methanogenesis. Reductive dehalogenation was the initial step in degradation not only under methanogenic, but also under sulfate- and iron(III)-reducing conditions. Dehalogenation rates were in general slower under sulfidogenic and iron-reducing conditions, suggesting that dehalogenation was affected by the electron acceptor. The capacity for dehalogenation appears to be widely distributed in anoxic environments; however, the different substrate specificities and activities observed for the halogenated aromatic compounds suggest that distinct dehalogenating microbial populations are enriched under the different reducing conditions. Characterization of the microbial community structure using a combination of biomolecular techniques, such as cellular fatty acid profiling, and 16 S rRNA fingerprinting/sequence analysis, was used to discern the distinct populations enriched with each substrate and under each electron-accepting condition. These combined techniques will aid in identifying the organisms responsible for dehalogenation and degradation of halogenated aromatic compounds.     

Determination of chemical availability of cadmium and zinc in soils using inert soil moisture samplers

A rapid method for extracting soil solutions using porous plastic soil-moisture samplers was combined with a cation resin equilibration based speciation technique to look at the chemical availability of metals in soil. Industrially polluted, metal sulphate amended and sewage sludge treated soils were used in our study. Cadmium sulphate amended and industrially contaminated soils all had > 65% of the total soil solution Cd present as free Cd2+. However, increasing total soil Cd concentrations by adding CdSO4 resulted in smaller total soil solution Cd. Consequently, the free Cd2+ concentrations in soil solutions extracted from these soils were smaller than in the same soil contaminated by sewage sludge addition. Amendment with ZnSO4 gave much greater concentrations of free Zn2+ in soil solutions compared with the same soil after long-term Zn contamination via sewage sludge additions. Our results demonstrate the difficulty in comparing total soil solution and free metal ion concentrations for soils from different areas with different physiochemical properties and sources of contamination. However, when comparing the same Woburn soil, Cd was much less available as Cd2+ in soil solution from the CdSO4 amended soils compared with soil contaminated by about 36 years of sewage sludge additions. In contrast, much more Zn was available in soil solution as free Zn2+ in the ZnSO4 amended soils compared with the sewage sludge treated soils.     

Growth, environment and innovation—a model with production vintages and environmentally oriented research

I develop an innovative environmental new growth model driven by researchers striving for monopoly profits. Skilled labour is allocated between production vintages and two forms of research, ordinary and environmentally oriented. The intermediate sector includes fixed costs and decreasing returns, limiting the number of vintages used. I solve for planner's, laissez-faire, and regulator's solutions, and examine welfare implications and the various distortions in the model (monopoly power, knowledge spillovers, business stealing, environmental externalities). A regulator may wish: (i) to encourage environmentally oriented research; (ii) to concentrate production labour on recent (cleaner) vintages; (iii) to switch labour from production to research. An environmental sales tax may under some circumstances achieve all three—such taxes not only give incentives to reduce pollution, but also shift profits from old vintages to new, thus raising incentives to come up with newer (cleaner) vintages. An environmental tax may even lead to an increase in the rate of production growth.