Road-deposited sediments mediating the transfer of anthropogenic organic matter to stormwater runoff

Environmental Geochemistry and Health - It has been regarded that road-deposited sediment (RDS) is one of the important sinks of anthropogenic pollutants as well as the major source of pollutants...     

Evaluation of the potential methane yield of industrial wastewaters used in bioreactor landfills

To increase the moisture content of waste disposed in a bioreactor landfill, it is critical to secure the moisture source. In this study, industrial wastewater was evaluated as a potential moisture source for a bioreactor landfill with respect to the impact on methane generation. Industrial wastewater samples were collected from fishery, brewery and dairy industries. These samples were tested for basic water chemistry parameters, heavy metals, and methane generation using the regular and modified biochemical methane potential (BMP) assays. Despite high sodium and total phosphate concentrations in the fishery wastewater, a significant methane yield was observed (0.313?m³ CH₄/kg COD). However, a relatively large amount of fishery wastewater added at the phase of methane generation acceleration adversely affected microbial activity. Samples from the brewery and dairy wastewater did not indicate significant inhibitory effects on methane generation in either the regular or the modified BMP assay. This study demonstrates the utility of wastewater as an alternative to traditional moisture sources when used to enhance methane production in a bioreactor landfill.     

Removal of trichloroethylene from soil using the hydration of calcium oxide

Quicklime addition to soil at a remediation site was observed to sufficiently reduce TCE levels, but the cause of the removal could not be confirmed with the field data collected. Potential mechanisms for CaO treatment of trichloroethylene (TCE) in soil include degradation and volatilization. Since earlier studies found TCE degradation to occur during the hydration of CaO under conditions where volatilization was limited, research was conducted on mechanisms of TCE removal from soil by CaO application under conditions where volatilization was allowed to occur. TCE volatilization in soil treated with 0%, 5%, 10%, and 20% CaO doses was measured in experiments where the degree of volatilization could be tracked. The total TCE removal from soil spiked with TCE at CaO doses from 5% to 20% ranged from 97% to 99% of the initial TCE mass. Volatilization accounted for 64.4-92.5% of the TCE removal, with unrecovered TCE and TCE degradation accounting for the remaining fraction. The greater heat encountered with higher CaO doses helped minimize obstacles to TCE volatilization, such as high soil organic and clay content. Treatment with a 20% CaO dose, however, led to the formation of byproducts such as dichloroacetylene. TCE degradation to dichloroacetylene at the 20% CaO dose ranged from 2.7% to 6.4% of the initial TCE. Volatilization was concluded to be the dominant process for TCE removal from soil during CaO treatment.     

Movement distances enhance validity of predictive models

Including the distance species are able to move in predictive models improves conservation practice. Bird inventory projects carried out from 1993 to 2004 in Taiwan provide an opportunity to investigate the relationships among species distribution, movement distance, and the environment. We compared projected distributions of 17 Taiwanese endemic bird species using what we called the Standard Method (i.e. movement distance is zero) and what we called the Buffer Method (i.e. movement distance is longer than zero) in three presence-only models (GARP, MAXENT and LIVES). The Standard Method used species original occurrence records directly while the Buffer Method expanded the occurrence of species to areas 1 km² around each recorded location. We first tested the efficacy of the Buffer Method using ten common species of the 17, and then applied the method to two rare species of the 17. For both the common and rare species, the distributions predicted by the two methods showed slight but important differences. The Buffer Method for all species had a higher average predictive probability, while the Standard Method had a higher maximum predictive probability. Most of the values for the area under the curve (AUC) were over 0.8 with the exceptions of Taiwan Barbet (Megalaima nuchalis) and Taiwan Hwamei (Garrulax taewanus), which have recently separated from Indochinese Barbet (Megalaima annamensis) and Chinese Hwamei (Garrulax canorus), and since 2008 and 2006 have been regarded as species endemic to the study area. Kappa values showed good performance for all species using both methods. The Buffer Method, however, resulted in significantly higher sensitivity and accuracy values for all models of species (p < 0.05). We conclude that when modeling species distribution including the area where the species was censused along with areas within the minimum movement areas better defines the surrounding areas that might supplement core habitat requirements. Therefore, using the Buffer Method, species surrounding distribution can be obtained which provides a better understanding of the species distributions. Given that distribution size is a key to the conservation of species, we suggest the Buffer Method can be used in conservation planning.     

The seasonal distribution of heavy metals in Mussel sample from Yalova in the Marmara Sea, 2008�C2009

Concentration of the some heavy metals (Co, Cu, Fe, Ni, Pb and Zn) Mediterranean mussel Mytilus galloprovincialis from Yalova (Marmara Sea) were investigated seasonally. The mean concentrations of Co, Cu, Fe, Ni, Pb and Zn in the soft tissues were 4.08 ± 0.67, 5.54 ± 0.59, 156.72 ± 20.18, 3.71 ± 1.14, 2.92 ± 0.51 and 106.23 ± 5.66 mg kg(?-1) dry weights, respectively. There were no significant differences between the metal concentrations among the seasons (P > 0.05). The mean Pb and Zn concentrations were higher than the acceptable limit proposed by International Turkish standards.     

Oxidation of elemental mercury using atmospheric pressure non-thermal plasma

The oxidation of gas phase elemental mercury (Hg0) by atmospheric pressure non-thermal plasma has been investigated at room temperature, employing both dielectric barrier discharge (DBD) of the gas mixture of Hg0 and injection of ozone (O3) into the gas mixture of Hg0. Results have shown that the oxidative efficiencies of Hg0 by DBD and the injection of O3 are 59% and 93%, respectively, with energy consumption of 23.7 J L(-1). This combined approach has indicated that O3 plays a decisive role in the oxidation of gas phase Hg0. Also the oxidation of Hg0 by injecting O3 into the gas mixture of Hg0 proceeds with better efficiency than DBD of the gas mixture of Hg0. These results have been explained by the incorporation of the competitive reaction pathways between the formation of HgO by O3 and the decomposition of HgO back to Hg0 in the plasma environment.     

Quantifying the efficiency of soil sampling designs: A multivariate approach

The objective of this paper is to quantify and compare the loss functions of the standard two-stage design and its composite sample alternative in the context of multivariate soil sampling. The loss function is defined (conceptually) as the ratio of cost over information and measures design inefficiency. The efficiency of the design is the reciprocal of the loss function. The focus of this paper is twofold: (a) we define a measure of multivariate information using the Kullback–Leibler distance, and (b) we derive the variance-covariance structure for two soil sampling designs: a standard two-stage design and its composite sample counterpart. Randomness in the mass of soil samples is taken into account in both designs. A pilot study in Slovenia is used to demonstrate the calculations of the loss function and to compare the efficiency of the two designs. The results show that the composite sample design is more efficient than the two-stage design. The efficiency ratio is 1.3 for pH, 2.0 for C, 2.1 for N, and 2.5 for CEC. The multivariate efficiency ratio is 2.3. These ratios primarily reflect cost ratios; influence of the information is small.     

Prenatal diagnosis of 46, XX/47, XXY mosaicism: A case report

A case of 46,XX/47,XXY mosaicism was diagnosed at 22 gestational weeks by amniocentesis and fetal blood sampling. After genetic counselling, the couple elected to have the pregnancy terminated. Culture of the fetal skin and both gonads confirmed the prenatal diagnosis. In external appearance, the abortus had no remarkable findings except hypospadia. Histology of both gonads showed testicular tissue without evidence of ovarian components.