Phycoremediation potential of marine microalga <Emphasis Type="Italic">Tetraselmis indica</Emphasis> on secondary treated domestic sewage for nutrient removal and biodiesel production

Marine microalga Tetraselmis indica (T. indica) was cultivated in secondary treated domestic sewage (STDS) in batch mode. Optimization studies showed that after 14 days of cultivation period, highest biomass yield reached was 0.88 ± 0.04 g/L at the optimum temperature of 27 ± 1 °C and light intensity of 135 μmol m^?2 s^?1. T. indica removed about 60.93% phosphate, 78.46% nitrate, 72.94% chemical oxygen demand (COD), 73.17% biological oxygen demand (BOD), 98.90% total dissolved solids (TDS) and heavy metals (83.11% Cd, 55.67% Ca, 45.12% Cu, 13.67% Mn, 50.88% Pb, and 98.92% Al) from STDS. The level of electrical conductivity was reduced to 0.0974 ± 0.045 dS/m. The fatty acid methyl ester (FAME) profile showed the presence of palmitic acid (12.91%), oleic acid (35.94%), linoleic acid (14.89%) and eicosanoic acid (12.34%). This study indicates the potential of T. indica for removal of pollutants from STDS and also its capability of biodiesel production.     

Immobilisation of beryllium in solid waste (red-mud) by fixation and vitrification

The objective of this study was to obtain information on the immobilization of beryllium (Be) in solid waste generated in the extraction process of beryllium from its ore, Beryl. This solid waste, termed red-mud, contains oxides of iron, aluminium, calcium, magnesium and beryllium. The red-mud waste contains beryllium at levels above the permissible limit, which prevents its disposal as solid waste. The total beryllium content in the red-mud analysed showed value ranging from 0.39 to 0.59% Be The studies showed that 50% of the total beryllium in red-mud can be extracted by water by repeated leaching over a period of 45 days. The cement mix, casting into cement blocks, was subjected to leachability studies over a period of 105 days and immobilization factor (IF factor) was determined. These IF values, of the order of 102, were compared with those obtained by performing leachability study on vitrified red-mud masses produced at different temperature conditions. Direct heating of the red-mud gave the gray coloured, non-transparent vitreous mass (as 'bad glass') showed effective immobilisation factor for beryllium in red-mud of the order of 10(4).     

Spatiotemporal changes of geomorphic environment in the Muriganga–Saptamukhi estuarine interfluve of Indian Sundarban in the context of climate change: a case study

The surface of the earth has been continuously sculptured by the exogenetic processes primarily by the climatic hydrological attributes. Over the sequential phases of evolution of earth, the climatic attributes have altered. The alternative processes such as glaciation and declaciation, fluctuations of sea level and variability in rainfall pattern have changed the surface configuration through maneuvering the operations of the geographical processes. The issue of climate change has become a matter of scientific concern all over the world as the human communities are facing severe problems manifested in the form of flood, drought and submergence of low-lying coastal regions, estuaries and deltas. The present study is an attempt to understand the nature and extent of climate change (1890–2012) and related sea level rise (1970s–2010) in the deltaic Sundarban region of India since the last century and how far they are impacting the erosion–depositional processes (1925, 1926–2014). The changing trend of mean annual temperature, rainfall pattern and frequencies of tropical cyclones has been studied in detail, and spatiotemporal changes of geomorphic environment in different reaches of the study area have also been monitored with available multi-temporal geospatial data. The observation reveals that the flat sandy coastal belt and low-lying island in the extreme southern part have been severely affected by wave dash and seasonal storm surges which are mostly responsible for vigorous erosion. On the other hand, high tidal velocity is observed along the exposed concave bank in the upper–middle reaches of the Muriganga estuary and exposed outer bank in lower–middle reaches of Saptamukhi estuary. The thalweg line, which is very close to the river bank in those reaches of estuary, intensifies the hydraulic pressure along marginal parts of river bank which leads to erosion. Depositional activities are mostly observed along the sheltered inner reaches and convex river banks of the estuaries due to less effective tidal rushes, shallow channel depth, marginal flow velocity and gentle channel slope. Therefore, erosional and depositional processes cannot be explain by the relative mean sea level rise, because increasing mean sea level will affect the erosional processes uniformly in the entire estuary. In this present study area, both the erosional and depositional processes are simultaneously active depending on geographical exposure, sinuous channel pattern, channel depth and lithological compositions.     

Sorption of metolachlor and atrazine in fly ash amended soils: comparison of optimized isotherm models

Adsorption of metolachlor and atrazine was studied in the fly ash (Inderprastha and Badarpur)- amended Inceptisol and Alfisol soils using batch method. Results indicated that sorption of both the herbicides in soil+fly ash mixtures was highly nonlinear and sorption decreased with a higher herbicide concentration in the solution. Also, nonlinearity increased with an increase in the level of fly ash amendment from 0-5%. Three two-parameter monolayer isotherms viz. Langmuir, Temkin, Jovanovic and one imperical Freundlich models were used to fit the experimental data. Data analysis and comparison revealed that the Temkin and the Freundlich isotherms were best-suited to explain the sorption results and the observed and the calculated adsorption coefficient values showed less variability. The study suggested that sorption mechanism of metolachlor and atrazine involved the physical association at the sorbate surface and the nonlinearity in the sorption at higher pesticide or fly ash concentration was due to a decrease in the heat of adsorption and higher binding energy.     

Application of HYDRUS 1D model for assessment of phenol–soil adsorption dynamics

Laboratory-scale batch, vertical, and horizontal column experiments were conducted to investigate the attenuative capacity of a fine-grained clayey soil of local origin in the surrounding of a steel plant wastewater discharge site in West Bengal, India, for removal of phenol. Linear, Langmuir, and Freundlich isotherm plots from batch experimental data revealed that Freundlich isotherm model was reasonably fitted (R ²?=?0.94). The breakthrough column experiments were also carried out with different soil bed heights (5, 10, and 15 cm) under uniform flow to study the hydraulic movements of phenol by evaluating time concentration flow behavior using bromide as a tracer. The horizontal migration test was also conducted in the laboratory using adsorptive phenol and nonreactive bromide tracer to explore the movement of solute in a horizontal distance. The hydrodynamic dispersion coefficients (D) in the vertical and horizontal directions in the soil were estimated using nonlinear least-square parameter optimization method in CXTFIT model. In addition, the equilibrium convection dispersion model in HYDRUS 1D was also examined to simulate the fate and transport of phenol in vertical and horizontal directions using Freundlich isotherm constants and estimated hydrodynamic parameters as input in the model. The model efficacy and validation were examined through statistical parameters such as the coefficient of determination (R ²), root mean square error and design of index (d).     

Histopathological alterations in gill,liver and kidney of common carp exposed to chlorpyrifos

Histopathological alterations in gill, liver and kidney of common carp, Cyprinus carpio, intoxicated with sub-lethal concentrations of chlorpyrifos (O,O,-diethyl-O-3,5,6-trichloro-2-pyridyl phosphorothioate) pesticide (1 and 100 μg/L) for a period of 14 days were analyzed under light microscope. Gill exhibited hyperplasia and hypertrophy of gill epithelium, blood congestion, dilation of marginal channel, epithelial lifting, lamellar fusion, lamellar disorganization, lamellar aneurysm, rupture of the lamellar epithelium, rupture of pillar cells and necrosis. Alterations in hepatocytes were more pronounced, including nuclear and cellular hypertrophy, cellular atrophy, irregular contour of cells and nucleus, cytoplasmic vacuolation, cytoplasmic and nuclear degeneration, cellular rupture, pyknotic nucleus, necrosis and melanomacrophages aggregations. Histopathological lesions in kidney were cellular and nuclear hypertrophy, narrowing of tubular lumen, cytoplasmic vacuolation, hyaline droplet degeneration, nuclear degeneration, occlusion of tubular lumen, tubular regeneration, dilation of glomerular capillaries, degeneration of glomerulus and hemorrhage in Bowman's space. The most significant conclusion drawn from this study was that with the increased concentration and duration the toxicosis of chlorpyrifos would be enhanced as shown through the analysis of mean assessment value (MAV) and degree of tissue changes (DTC) also.     

Assessment of alpha activity of building materials commonly used in West Bengal, India

This paper, reports for the first time, an extensive study of alpha activity of all widely used building materials (plaster of Paris, stone chips, marble, white cement, mosaic stone, limestone, sand, granite, cement brick, asbestos, red brick, cement tile, ceramic tile and ceramics) in West Bengal, India. The alpha activities have been measured using Solid State Nuclear Track Detector (SSNTD), a very sensitive detector for alpha particles. The samples were collected from local markets of Kolkata. The measured average alpha activities ranged from 22.7+/-2.5 to 590.6+/-16.8Bqkg(-1). The alpha activity of ceramic tiles was highest and provides additional data to estimate the effect of environmental radiation exposure on human health.     

Sustainability analysis of organic fraction of municipal solid waste conversion techniques for efficient resource recovery in India through case studies

Worldwide solid waste generation is nearly 1.3 billion tonnes/year, whereas in India 62 million tonnes of solid waste is generated per year by 377 million urban people. The increasing amount of solid waste in India, nearly 50% of which is organic matter, is the major concern for treatment and waste management. Several technologies are already in practice for the treatment of organic fraction of municipal solid waste (OFMSW) in India. It is important to assess the sustainability of these processes. In this study, the existing OFMSW technologies in India were examined. Case-study approach was taken for this purpose along with some published secondary reports. It was found that the selection of technology quite depends on the composition of the OFMSW. Food waste rich fractions are recommended for biomethanation, whereas the fractions rich in market waste and household waste are suitable for composting. Fractions rich in lignin and lignocellulosic materials are suitable for pyrolysis and gasification, whereas the rejects are to be sent for RDF preparation. Based on the findings, a sustainable framework has also been proposed, implementation of which may result in better waste management.