Effectiveness of the designed safety education programme modules by their implementation in selected industries

Various and diverse industrial safety areas were identified and grouped as under: general areas of safety, Special areas of safety and industry specific areas of safety.

General areas of safety are common to all industries and special areas of safety are relevant only if the selected industry has such nature of work or hazard and whereas the industry specific areas of safety refers to process safety of the industry. Three separate modules were prepared along with contents.

For conduction of the programme, the selected industry must be studied and the designed safety education programme modules have to be adapted by leaving irrelevant areas in special and industry specific areas of the designed safety modules. The implementation of safety education programme was carried out at Bharath Heavy Electricals Ltd, Trichy and Southern Railway workshop, Trichy, by adapting the designed modules to suit these industries as mentioned above.

Effectiveness is measured by the increase in safety awareness of the selected industrial workers (sample), who had already undergone such programmes with short falls conducted within the industry itself. Research Tool was prepared based on the contents of the adapted safety education modules and pre-test and post-test were conducted, data collected and analysed.

The results were statistically significant as confirmed by t-test analyses.     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

Inequality in water supply in India: an assessment using the Gini and Theil indices

Provision of drinking water is considered to be an essential public service. Ensuring adequate water supply remains a challenge in Indian cities that are experiencing rapid growth and often exhibit a mismatch between increasing demands and inadequate supply infrastructure. This study quantifies the existing inequality in water supply within Indian cities through Lorenz curve, Gini coefficient as well as Theil indices. Two types of Theil indices are estimated to gain different perspectives: water supply and population-weighted. Both the Theil indices are disaggregated, according to economic and regional categorisation of the cities, to explore the within- and between-group inequality. The water supply and population-weighted Theil indices provide different outlook of the inequality amongst the cities. But the population-weighted index is often better and pragmatic. Further, the inequality in access to tap water in India is studied by estimating modified Lorenz curves and Theil indices. Again, the Theil indices are decomposed into within and between components according to economic and regional grouping of states. The results suggest that there is disparity in supply of water in India, and infrastructure has to be boosted to meet the growing demand. This study is a step towards quantification of water supply inequality. The approach used in the study can contribute to monitoring of water supply equity as well as in formulating sustainable and equitable water policies.     

Performance evaluation of isoproturon-degrading indigenous bacterial isolates in soil microcosm

Isoproturon (IPU)-degrading soil bacteria were isolated from herbicide-applied wheat fields. These isolates were identified using cultural, morphological, biochemical and 16S rRNA sequencing methods. 16S rRNA sequences of both the bacterial isolates were compared with NCBI GenBank data base and identified as Bacillus pumilus and Pseudoxanthomonas sp. A soil microcosm study was carried out for 40 days in six different treatments. Experimental results revealed maximum 95.98% IPU degradation in treatment 6 where bacterial consortia were augmented in natural soil, followed by 91.53% in treatment 5 enriched with organic manure as an additional carbon source. However, only 14.03% IPU was degraded in treatment 1 (control) after 40 days. In treatments (2–4), 75.59%, 70.92% and 77.32% IPU degradation was recorded, respectively. IPU degradation in all the treatments varied significantly over the control. 4-Isopropylaniline was detected as IPU degradation by-product in the medium. The study confirmed that B. pumilus and Pseudoxanthomonas sp. performed effectively in soil microcosms and could be employed profitably for field-scale bioremediation experiments.     

A comprehensive review of the energy efficiency on nano coated fin and tube condenser

The condenser is a piece of equipment used to effectively transfer heat from water to the environment. The fin and tube condenser is the most commonly used in commercial applications. The improved performance of heat transfer in the fin and tube condenser is a significant area of study all over the world because optimizing the efficiency of heat transfer in the condenser will contribute to enhancing the effectiveness of system performance. The vapor deposition, plasma spray, and thermal spray techniques are being used, and it is determined that a heat transfer enhancing coating improves condenser performance. This review discusses the nanomaterial coating over the fin and tube condenser in detail. The various nanomaterial coatings with various propositions and coating methods had been discussed with the evidence of previous researchers. At a 50-degree inclination angle on the condensate plate, the condensate over the coating surface increases by more than 30%. The thermal properties of the working fluid are improved over the condenser, and the overall effectiveness of the condenser is increased by approximately 40% over the non-coated condenser. A 1% volumetric concentration of Nanoparticles in the coated material achieves a maximum efficiency increase of 78.7%.     

Geotechnical properties of fresh municipal solid waste at Orchard Hills Landfill, USA

This paper presents the results of a laboratory investigation to determine the geotechnical properties of fresh municipal solid waste (MSW) collected from the working phase of Orchard Hills Landfill located in Davis Junction (Illinois, USA). Laboratory testing was conducted on shredded MSW to determine the compaction, hydraulic conductivity, compressibility, and shear strength properties at in-situ gravimetric moisture content of 44%. In addition, the effect of increased moisture content during leachate recirculation on compressibility and shear strength of MSW was also investigated by testing samples with variable gravimetric moisture contents ranging from 44% to 100%. Based on Standard Proctor tests, a maximum dry density of 420 kg/m(3) was observed at 70% optimum moisture content. The hydraulic conductivity varied in a wide range of 10(-8)-10(-4)m/s and decreased with increase in dry density. Compression ratio values varied in a close range of 0.24-0.33 with no specific trend with the increase in moisture content. Based on direct shear tests, drained cohesion varied from 31 to 64 kPa and the drained friction angle ranged from 26 to 30 degrees. Neither cohesion nor friction angle demonstrated any correlation with the moisture content, within the range of moisture contents tested. The consolidated undrained triaxial shear tests on saturated MSW showed the total strength parameters (c and phi) to be 32 kPa and 12 degrees, and the effective strength parameters (c' and phi') to be 38 kPa and 16 degrees. The angle of friction (phi) decreased and cohesion (c) value increased with the increase in strain. The effective cohesion (c') increased with increase in strain; however, the effective angle of friction (phi') decreased first and then increased with the increase in strain. Such strain-dependent shear strength properties should be properly accounted in the stability analysis of bioreactor landfills.     

Inter-species differences for polychlorinated biphenyls and polybrominated diphenyl ethers in marine top predators from the Southern North Sea: Part 2. Biomagnification in harbour seals and harbour porpoises

Harbour porpoises (Phocoena phocoena) and harbour seals (Phoca vitulina) were found to differ in the ability to metabolize polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Biomagnification factors (BMFs), calculated between both predators and their prey (sole - Solea solea and whiting - Merlangius merlangus), had a large range of variation (between 0.5 and 91 for PCBs and between 0.6 and 53 for PBDEs). For the higher chlorinated PCBs and the highest brominated PBDEs, the BMF values in adult males were significantly higher than in the juvenile individuals of both species. BMF values of hexa- to octa-PCBs were the highest, suggesting reduced ability to degrade these congeners. Harbour porpoises had higher BMFs for lower chlorinated PCBs and for all PBDEs compared to harbour seals. Other factors, which may influence biomagnification, such as the octanol-water partition coefficients and the trophic level position measured through stable isotope (δ¹⁵N) analysis, were found to be of lesser importance to predict biomagnification in the studied food chain.     

Agroforestry in the Western Ghats of peninsular India and the satoyama landscapes of Japan: a comparison of two sustainable land use systems

Agroforestry in the Western Ghats (WG) of peninsular India and satoyama in rural Japan are traditional land-use systems with similar evolutionary trajectories. Some of their relevance was lost by the middle of the twentieth century, when modern agricultural technologies and urbanisation engineered shifts in emphasis towards maximising crop production. There has been, however, a resurgence of interest in traditional land-use systems recently, in view of their ability to provide ecosystem services. Both agroforestry and satoyama are thought to be harbingers of biological diversity and have the potential to serve as “carbon forests.” Carbon (C) stock estimates of the sampled homegardens in WG ranged from 16 to 36 Mg ha⁻¹. Satoyama woodlands owing to variations in tree stocking and management conditions indicated widely varying C stocks (2–279 Mg ha⁻¹). Agroforestry and satoyama also differ in nature, complexity, and objectives. While agroforestry involves key productive and protective functions, and adopts ‘intensive management’, the satoyama woodlands are extensively managed; understorey production is seldom a consideration. Differences in canopy architecture (multi-tiered structure of agroforestry vs. the more or less unitary canopy of satoayama) and land ownership pattern (privately owned/managed agroforestry holdings vs. community or local government or privately owned and mostly abandoned satoyamas) pose other challenges in the transfer and application of knowledge gained in one system to the other. Nonetheless, lessons learnt from satoyama conservation may be suitable for common pool resource management elsewhere in Asia, and aspects relating to understorey production in agroforestry may be relevant for satoyama under certain scenarios.     

Influence of aerosol spectrum and air pollutants on fog formation in urban environment of megacity Delhi, India

Urban areas are facing increasing fog frequencies that may result due to increased air pollution emanating from variety of sources. The increased pollution levels may lead to the atmospheric reactions resulting into the formation of secondary pollutants that may also lead to increased aerosol number concentrations (ANC) in the atmosphere. This could cause enhanced water aerosols in the presence of favourable meteorological conditions and high relative humidity. This study deals with the atmospheric pollution and visibility during winter season of megacity Delhi in order to assess the relationship between the two specifically during fog episodes. Thus, this study analyses the levels of air pollutants, aerosol spectrum and meteorological conditions during one week each in the winter season of the years 2004 and 2006 in order to have an improved understanding of their role in fog formation in mega-city Delhi. More than 300 h of measurements which included episodes of dense, thick and moderate fogs of about 25 h, were studied. The measurements cover most of the accumulation mode and greater size spectrum of aerosols. Thus, the analysis is performed for the entire period, specifically, before the fog sets up, during and afterwards. In general, the relatively small variations in number concentration show larger variations in visibility prior and post dense fog formation than during dense fog episodes. Preliminary analysis of monthly averaged RSPM (Respirable Suspended particulate Matter or PM(10)) concentration values for four winter months for a period of 6 years (1996-2001) and visibility did not show a good correlation with total occurrences of fog. However, daily averaged RSPM concentration showed a good correlation with the occurrences of thick fog. Diurnal variation of Sulfur-dioxide and Nitrogen dioxide were found to have inverse relationship with visibility during fog which may be due to formation of secondary pollutants such as sulfate and to a lesser extent nitrates. Amongst, the daily averaged concentrations of all the criteria pollutants, RSPM was found to be best correlated with the fog in comparison to other pollutants.     

Assessment of large-scale deforestation of Nawarangpur district, Orissa, India: a remote sensing based study

The Nawarangpur district, Orissa, a tropical region with Sal mixed moist deciduous and Sal mixed dry deciduous forests, has been affected by extensive deforestation. The district was surveyed using Landsat MSS (1973), Landsat TM (1990) and IRS P6 LISS III (2004) satellite imagery. From 1973 to 1990, more than 888.6 km(2) of dense forest (rate of deforestation = 3.62) and from 1990 to 2004, 429.7 km(2) (rate of deforestation = 3.97) were found to have been deforested. The analysis of results identified the reduction in area of dense forest and increase of agricultural land, degraded areas of abandoned agricultural land and unproductive scrub. There is an urgent need for rational management of the remaining forest for it to be able to survive beyond next decades. From this study it can be concluded that temporal changes and the factors affecting these changes should be determined for sustainable management of natural resources.