Diel variation of TCO2 in the upper layer of oceanic waters reflects microbial composition,variation and possibly methane cycling

Six diel TCO₂ cycles determined by infrared (IR) photometry from five drift stations occupied between 24 February and 16 March 1979 in the mixed layer of the northwestern Caribbean Sea are examined. Comparison of TCO₂ variation with coincident salinity and O₂ variation demonstrated that TCO₂ often co-varied with these independently measured variables. During five diel cycles TCO₂ variation was characterized by nocturnal production and diurnal consumption. The inverse, diurnal production of CO₂, occurred downstream from Misteriosa Bank, whose corals apparently contributed to a water mass having a twofold increase of POC and a sixfold larger population of heterotrophic nanoplankters. For the five diel studies carried out in waters with balanced or nearly blanced heterotrophic and phototrophic components of the nanoplankton, CO₂ consumption at constant salinity always occurred between 06.00 and 09.00 hrs. Net uptake often continued through 15.00 hrs, but not always in the absence of significant salinity changes. At constant salinity net O₂ evolution never exceeded 0.5 mol l^-1 h^-1 while net CO₂ uptake consistently averaged 3 mol l^-1 h^-1 for an apparent net production of 36 mg C m^-3 h^-1, which greatly exceeds the O₂ changes and open ocean ¹⁴C estimates from the literature. Diurnal consumption was apparently balanced by nocturnal production of CO₂ so that no significant net daily change in TCO₂ was observed. Departures from theoretical PQ and RQ and the possibility of nocturnal variations in formaldehyde and carbonate alkalinity imply that chemotrophs, both methane producers and methane oxidizers, play a significant role in CO₂ cycling. This could be through the metabolism of the nonconservative gases CH₄, CO, and H₂, and a link between chemotrophy and phototrophy through these gases is hypothesized. These open system measurements were subject to diffusion and documentable patchiness, but temporal TCO₂ changes appear to indicate the net direction of microbiological activity and join a growing body of literature showing dynamic variation in CO₂ and O₂ that exceeds estimates by ¹⁴C bottle assays of carbon fixation.     

Determining the carbon-to-chlorophyll ratio of natural phytoplankton

For field samples, regression analyses of plots of chemically determined particulate organic carbon on chlorophyll are often employed to estimate the algal carbon-to-chlorophyll ratio (F) in the presence of appreciable amounts of nonalgal particulate organic carbon. Spurious results will be obtained, however, if the temporal rate of change of the algae or the nonplant matter reverses its sign during the sampling interval and the samples cannot be ordered correctly in time or space. Previously recognized sources of bias inherent in the chemical approach are also discussed. The great uncertainty of our present knowledge of F is pointed out. It is shown that the concentration of microscopically visible, nonliving particles in the sea isnot known. Renewed studies are suggested as a means of improving on the chemical approach to determining F. The general argument holds for the ratios of nitrogen (particle volume, etc.)-to-chlorophyll, carbon (nitrogen, particle volume, etc.)-to-ATP, and similar conversion factors.Contribution No. 932 from the Department of Oceanography, University of Washington, Seattle, Washington 98195, USA. The article is a revised and expanded version of a paper contributed at the Joint Oceanographic Assembly, September 1976, at Edinburgh, Scotland, UK.     

CSHM: Web-based safety and health monitoring system for construction management

INTRODUCTION: This paper describes a web-based system for monitoring and assessing construction safety and health performance, entitled the Construction Safety and Health Monitoring (CSHM) system. METHOD: The design and development of CSHM is an integration of internet and database systems, with the intent to create a total automated safety and health management tool. A list of safety and health performance parameters was devised for the management of safety and health in construction. A conceptual framework of the four key components of CSHM is presented: (a) Web-based Interface (templates); (b) Knowledge Base; (c) Output Data; and (d) Benchmark Group. RESULTS: The combined effect of these components results in a system that enables speedy performance assessment of safety and health activities on construction sites. With the CSHM's built-in functions, important management decisions can theoretically be made and corrective actions can be taken before potential hazards turn into fatal or injurious occupational accidents. IMPACT ON INDUSTRY: As such, the CSHM system will accelerate the monitoring and assessing of performance safety and health management tasks.     

Mitigating nutrient leaching with a sub-surface drainage layer of granulated tires

Markets for scrap tires have expanded since the early 1990s with the development of value-added applications such as tire-derived fuel and crumb-rubber-amended asphalt. Granulated tires have also displayed the ability to adsorb volatile organic compounds, indicating that the rubber material can be a useful filter media. Sand-based root zones, typically used for golf course putting green and athletic field construction, lack sufficient cation exchange capacity to restrict nitrogen and phosphorus migration through the root zone and into sub-surface drainage systems. Therefore, the adsorptive properties of tire rubber for retaining nitrogen and phosphorus were studied when applied as a distinct sub-surface drainage or intermediate layer in golf course putting greens. A statistically significant reduction in the concentration of nitrate in leachate was achieved by replacing traditional pea gravel with equally sized granulated tires for the drainage layer media, although the mechanism of nitrate mitigation remains unclear. The results indicate that using granulated tires as a drainage layer or fill material beneath sand-based root zones does not compromise the function of the profile or quality of the vegetation while creating an environmentally beneficial and value-added option for scrap tire reuse.     

Removal of PCDD/F from flue gases in fixed or moving bed adsorbers

Whereas the PCDD/F-abatement in MSWIs is mostly achieved through entrained-phase adsorption upon activated carbon, the other thermal processes are more bending towards fixed/moving bed adsorption or catalytic destruction. The treatment of entrained-phase adsorption has been previously dealt with. The present paper focuses upon fixed/moving bed adsorption as abatement alternative. The characteristics of granular carbonaceous adsorbents are reviewed and commented upon, and stress some advantages of the fixed/moving bed operation. The equilibrium adsorption characteristics are expressed in terms of the number of active sites of the adsorbent and its saturation capacity. The breakthrough calculations for a fixed/moving bed adsorber are based upon these adsorption characteristics and expressed in terms of the relevant operating parameters of the flue gases to be treated. Although detailed literature data on these adsorbers are scarce, application of the design equations predicts meaningful results, thus demonstrating the predictive capacity of the design method.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.