Photolysis of pharmaceuticals and personal care products in the marine environment under simulated sunlight conditions: irradiation and identification

The photochemical fate of 16 pharmaceuticals and personal care products (PPCPs) found in the environment has been studied under controlled laboratory conditions applying a sunlight simulator. Aqueous samples containing PPCPs at environmentally relevant concentrations were extracted by solid-phase extraction (SPE) after irradiation. The exposed extracts were subsequently analysed by liquid chromatography combined with triple quadrupole mass spectrometry (HPLC-MS/MS) for studying the kinetics of photolytic transformations. Almost all exposed PPCPs appeared to react with a half-life time (τ _1/2) of less than 30 min. For ranitidine, sulfamethoxazole, diclofenac, warfarin, sulfamethoxazole and ciprofloxacin, τ_1/2 was found to be even less than 5 min. The structures of major photolysis products were determined using quadrupole-time-of-flight mass spectrometry (QToF) and spectroscopic data reported in the literature. For diclofenac, the transformation products carbazol-1-yl-acidic acid and 8-chloro-9H-carbazol-1-yl-acetic acid were identified based on the mass/charge ratio of protonated ions and their fragmentation pattern in negative electrospray ionization (ESI^?-QTOF). Irradiation of carbamazepine resulted in three known products: acridine, carbamazepine-10,11-epoxide, and 10,11-dihydro-10,11-dihydroxy-carbamazepine, whereas acetaminophen was photolytically transformed to 1-(2-amino-5 hydroxyphenyl) ethenone. These photochemical products were subsequently identified in seawater or fish samples collected at sites exposed to wastewater effluents on the Saudi Arabian coast of the Red Sea.     

Generating a geospatial database of U.S. regional feedstock production for use in evaluating the environmental footprint of biofuels

The potential environmental effects of increased U.S. biofuel production often vary depending upon the location and type of land used to produce biofuel feedstocks. However, complete, annual data are generally lacking regarding feedstock production by specific location. Corn is the dominant biofuel feedstock in the U.S., so here we present methods for estimating where bioethanol corn feedstock is grown annually and how much is used by U.S. ethanol biorefineries. We use geospatial software and publicly available data to map locations of biorefineries, estimate their corn feedstock requirements, and estimate the feedstock production locations and quantities. We combined these data and estimates into a Bioethanol Feedstock Geospatial Database (BFGD) for years 2005–2010. We evaluated the performance of the methods by assessing how well the feedstock geospatial model matched our estimates of locally-sourced feedstock demand. On average, the model met approximately 89 percent of the total estimated local feedstock demand across the studied years—within approximately 25-to-40 kilometers of the biorefinery in the majority of cases. We anticipate that these methods could be used for other years and feedstocks, and can be subsequently applied to estimate the environmental footprint of feedstock production.

Implications: Methods used to develop the Bioethanol Feedstock Geospatial Database (BFGD) provide a means of estimating the amount and location of U.S. corn harvested for use as U.S. bioethanol feedstock. Such estimates of geospatial feedstock production may be used to evaluate environmental impacts of bioethanol production and to identify conservation priorities. The BFGD is available for 2005–2010, and the methods may be applied to additional years, locations, and potentially other biofuels and feedstocks.     

Indoor pollutant exposure among children with and without asthma in Porto,Portugal, during the cold season

Environmental Science and Pollution Research - Considering the time spent in enclosed spaces, indoor air pollutants are of major interest because of its possible impact on health. However, to date,...     

Electrochemical removal of synthetic textile dyes from aqueous solutions using Ti/Pt anode: role of dye structure

In this work, the efficiency of electrochemical oxidation (EO) was investigated for removing a dye mixture containing Novacron Yellow (NY) and Remazol Red (RR) in aqueous solutions using platinum supported on titanium (Ti/Pt) as anode. Different current densities (20, 40 and 60 mA cm^?2) and temperatures (25, 40 and 60 °C) were studied during electrochemical treatment. After that, the EO of each of these dyes was separately investigated. The EO of each of these dyes was performed, varying only the current density and keeping the same temperature (25 °C). The elimination of colour was monitored by UV-visible spectroscopy, and the degradation of organic compounds was analysed by means of chemical oxygen demand (COD). Data obtained from the analysis of the dye mixture showed that the EO process was effective in colour removal, in which more than 90 % was removed. In the case of COD removal, the application of a current density greater than 40 mA cm^?2 favoured the oxygen evolution reaction, and no complete oxidation was achieved. Regarding the analysis of individual anodic oxidation dyes, it was appreciated that the data for the NY were very close to the results obtained for the oxidation of the dye mixture while the RR dye achieved higher colour removal but lower COD elimination. These results suggest that the oxidation efficiency is dependent on the nature of the organic molecule, and it was confirmed by the intermediates identified. Figure

Chemical structures of a NY and b RR     

Chemical and microbial characteristics of municipal drinking water supply systems in the Canadian Arctic

Drinking water in the vast Arctic Canadian territory of Nunavut is sourced from surface water lakes or rivers and transferred to man-made or natural reservoirs. The raw water is at a minimum treated by chlorination and distributed to customers either by trucks delivering to a water storage tank inside buildings or through a piped distribution system. The objective of this study was to characterize the chemical and microbial drinking water quality from source to tap in three hamlets (Coral Harbour, Pond Inlet and Pangnirtung—each has a population of <2000) on trucked service, and in Iqaluit (population ~6700), which uses a combination of trucked and piped water conveyance. Generally, the source and drinking water was of satisfactory microbial quality, containing Escherichia coli levels of <1 MPN/100 mL with a few exceptions, and selected pathogenic bacteria and parasites were below detection limits using quantitative polymerase chain reaction (qPCR) methods. Tap water in households receiving trucked water contained less than the recommended 0.2 mg/L of free chlorine, while piped drinking water in Iqaluit complied with Health Canada guidelines for residual chlorine (i.e. >0.2 mg/L free chlorine). Some buildings in the four communities contained manganese (Mn), copper (Cu), iron (Fe) and/or lead (Pb) concentrations above Health Canada guideline values for the aesthetic (Mn, Cu and Fe) and health (Pb) objectives. Corrosion of components of the drinking water distribution system (household storage tanks, premise plumbing) could be contributing to Pb, Cu and Fe levels, as the source water in three of the four communities had low alkalinity. The results point to the need for robust disinfection, which may include secondary disinfection or point-of-use disinfection, to prevent microbial risks in drinking water tanks in buildings and ultimately at the tap.     

Assessment of fecal sterols in Barigui River sediments in Curitiba, Brazil

The Barigui River watershed is located in the metropolitan region of Curitiba, southern Brazil, passing through several neighboring counties. In recent years, due to growth and disorderly occupation along the river, in addition to lack of sanitation, the Basin suffered a very large inflow of untreated domestic sewage. Current programs to monitor the watershed use traditional physical-chemical parameters and generally the analysis is performed only with water samples. This study analyzes the presence of fecal sterols in sediment samples. Sediment samples were collected from six points along the river and the stanols were extracted, purified and analyzed by GC-MS. Eight compounds were analyzed, among sterols and ketones. The presence of coprostanol was also identified. Coprostanol is a stanol containing a large amount in human feces. It is found near sources of pollution and can be associated with contamination by domestic sewage. The results showed high concentrations of coprostanol, ranging from 0.25 to 196 mug g( - 1). The ratio of coprostanol and epicoprostanol, was below 0.20 at most stations, indicating that the sewage discharged into the river does not undergo prior treatment. Contamination by untreated sewage was also confirmed by ratios of isomeric forms of sterols and ketones 5beta/(5beta + 5alpha).     

Critical analysis of the waste management performance of two uranium production units in Brazil--part I: Poços de Caldas production centre

Waste management strategies in mining projects will depend to a large extent on the characteristics of the operational process, the type of ore and prevailing socio-environmental conditions, amongst other issues. The expenditures required by the management scheme and the implementation of remediation programs will be determined by the extent that the above issues were considered in the planning phase of the project. Several works have been published in the literature concerning the analysis of waste management programs and environmental impacts associated with uranium projects around the world. However, the vast majority do not report a comprehensive assessment integrating the various relationships among operational process, environmental impact, remediation strategy and costs. This study, divided into two papers, presents a detailed critical analysis of the waste management strategies adopted in two uranium production centres in Brazil, i.e., the Poços de Caldas Project (Part I) and the Caetité Project (Part II). The operational processes are described and the environmental impacts of the generated wastes as well as the adopted management strategies and costs are examined. Also, in Part II, a comparison between both production centres is made emphasizing the impacts of environmental and social-economical issues on the overall assessment.     

Responses of future air quality to emission controls over North Carolina,Part I: Model evaluation for current-year simulations

The prediction of future air quality and its responses to emission control strategies at national and state levels requires a reliable model that can replicate atmospheric observations. In this work, the Mesoscale Model (MM5) and the Community Multiscale Air Quality Modeling (CMAQ) system are applied at a 4-km horizontal grid resolution for four one-month periods, i.e., January, June, July, and August in 2002 to evaluate model performance and compare with that at 12-km. The evaluation shows skills of MM5/CMAQ that are overall consistent with current model performance. The large cold bias in temperature at 1.5 m is likely due to too cold soil initial temperatures and inappropriate snow treatments. The large overprediction in precipitation in July is due likely to too frequent afternoon convective rainfall and/or an overestimation in the rainfall intensity. The normalized mean biases and errors are ?1.6% to 9.1% and 15.3–18.5% in January and ?18.7% to ?5.7% and 13.9–20.6% in July for max 1-h and 8-h O₃ mixing ratios, respectively, and those for 24-h average PM_2.5 concentrations are 8.3–25.9% and 27.6–38.5% in January and ?57.8% to ?45.4% and 46.1–59.3% in July. The large underprediction in PM_2.5 in summer is attributed mainly to overpredicted precipitation, inaccurate emissions, incomplete treatments for secondary organic aerosols, and model difficulties in resolving complex meteorology and geography. While O₃ prediction shows relatively less sensitivity to horizontal grid resolutions, PM_2.5 and its secondary components, visibility indices, and dry and wet deposition show a moderate to high sensitivity. These results have important implications for the regulatory applications of MM5/CMAQ for future air quality attainment.     

Strategies for applying gray water effluent on ornamental sunflower crops

Environmental Science and Pollution Research - In a context of scarcity of good quality water, reuse is a mandatory practice to increase water availability, thus allowing the exploitation of more...     

Exploring Homeowner Diffusion of Yard Care Knowledge as One Step Toward Improving Urban Ecosystems

Urban ecosystems are increasingly influenced by residential yard care decisions. This had led researchers to focus on homeowner education programs when it comes to yard care. Typically, the success of programs designed to influence yard care is based on whether the target subject changes his or her behavior in a more environmentally conscious manner. This threshold, however, fails to consider if individuals share this information with their friends and neighbors, thus having a possible spillover effect. In this paper, we focus on the transmission of new lawn management information among neighbors and consider (1) if individuals discuss information they learned in a short-term educational program, (2) what factors are associated with diffusion, (3) what information individuals share, and (4) what barriers to transmission exist. In the Minneapolis–St. Paul metropolitan area, we used data from a mailed survey, group discussions, and mailed information exchanges. Results indicate that best management practices for yards can diffuse through the neighborhood (approximately 34 % shared information with their neighbors in a one-month period). In addition, factors such as (1) attending a group discussion, 2) individual social connectedness, (3) length of home ownership, and (4) the presence of children in the household were found to be positively related to increased sharing of information. Also, for lawns, the content of information shared tended to be about increasing grass height and reducing fertilizer applications. Finally, we find barriers to sharing ideas based on spatial, temporal, or perception factors but overcoming some of these barriers is possible.