Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

Multibody model of the human upper extremity for fracture simulation

About 3.8 million people are injured in accidents at work in Europe every year. The resulting high costs are incurred by the victims themselves, their families, employers and society. We have used a numerical simulation to reconstruct accidents at work for several years. To reconstruct these accidents MADYMO R7.5 with a numerical human model (pedestrian model) is used. However, this model is dedicated to the analysis of car-to-pedestrian accidents and thus cannot be fully used for reconstructing accidents at work. Therefore, we started working on the development of a numerical model of the human body for the purpose of simulating accidents at work. Developing a new numerical model which gives an opportunity to simulate fractures of the upper extremity bones is a stage of that work.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Origin,distribution, and perspective health benefits of particulate matter in the air of underground salt mine: a case study from Bochnia,Poland

Environmental Geochemistry and Health - The composition and distribution of airborne particles in different locations in a salt mine were determined in terms of their origin, the distance from the...     

Efficient uranium immobilization on red clay with phosphates

Uranium is a very toxic and radioactive element. Removal of uranium from wastewaters requires remediation technologies. Actual methods are costly and ineffective when uranium concentration is very low. Little is known about the enhancement of sorption of uranyl ions by phosphate ions on aluminosilicates. Here, we studied sorption of uranyl acetate on red clay in the presence of phosphates. The concentration of U(VI) ranged 0.0001–0.001 mol/L, whereas the concentration of PO₄ ^3? was constant at 0.0001 mol/L. We designed a new method for the analysis of ternary surface complexes. We observed for the first time a remarkable improvement of U(VI) sorption on red clay under the influence of phosphates. We also found that at least two different ternary surface complexes U(VI)–phosphate–clay are formed in the sorbent phase. The complexation of UO₂ ²⁺ cations by phosphate ligands in the sorbent phase was confirmed by the X-ray photoelectron spectra of U 4f electrons.     

Employment of passive sampling in monitoring indoor air quality in selected residences in a Tri-city area in Poland

Time-weighted average concentrations of selected volatile compounds were measured in chosen residences in a Tri-City area of Poland by means of passive sampling. The results were compared to those obtained by dynamic technique – sorption tubes filled with Tenax TA sorbent. Results obtained by employing the two techniques were similar. Total volatile organic compound (TVOC) parameters were also determined. An attempt was also made to evaluate the influence of outdoor air pollutants on indoor air quality.     

Determination of 4-nonylphenol in carp blood samples by solid phase extraction and chromatographic techniques

In this study, selective methods were developed for isolation, purification, separation and determination of 4-nonylphenol (4NP) in biological samples. Several methods such as high-performance liquid chromatography (HPLC) with fluorescence and diode array detection and gas chromatography coupled to mass spectromotry (GC-MS) are described for the simultaneous determination of 4NP. The nonylphenols in the plasma of fish were extracted through solid phase process by using octadecyl, polymeric and octadecyl endcapping sorbents. The average recoveries in plasma samples spiked with 4NP of levels 1?µg?mL^?1 were between 80–95% using added surrogate standards. The aim of this study was to determine whether trace amounts of 4NP in fish plasma samples could be detected by solid phase extraction and chromatographic methods (HPLC, GC-MS). This technique of monitoring the levels of endocrine-disruptors in plasma samples is consistent, reliable as well as inexpensive.     

Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

Nickel in the muscle tissues of freshwater fish from north eastern Poland should not cause human health concerns

Excessive intake of nickel (Ni) is known to produce adverse health effects in humans, including carcinogenicity and allergenicity. The main route of exposure for humans is diet, including fish. There is, however, little information concerning Ni content in freshwater fish in Poland. The aim of the study was to determine the concentrations of Ni in meat tissues of three fish species from north eastern Poland and assess toxic potential to healthy and susceptible sub-groups of individuals. The settings for the study lakes span a range of anthropogenic influence from protected areas to a basin with a town and several villages and another one influenced by a pesticide tomb leakage. Fish were netted and kept frozen until analysis. After defrosting, the fish were filleted and minced. The ashed samples were dissolved in nitric acid and analyzed for Ni by flame atomic absorption spectrometry. Roach meat contained 6.6–23 µg kg^?1 Ni, bream 9.5–178 µg kg^?1, and carp 16.5–139 µg kg^?1. These concentrations are low, indicating that the fish were not excessively contaminated with the metal. Consuming a 250 g portion of fish would result in an average nickel intake of 4 µg for roach, <10 µg for bream, and <20 µg for carp. These values represent only 0.4–2% of the maximum level that is likely to pose a risk of adverse effects as established in the USA. Consumption of fish from the study region need not necessarily pose a health threat.