Land Conversion for Suburban Housing: A Study of Urbanization Around Warsaw and Olsztyn,Poland

In Poland of the 1990s, urban demand for housing land around city agglomerations increased rapidly. The decreasing profitability of agricultural production also caused farmers to become interested in the sale of agricultural land for nonagricultural purposes, and new land legislation granted them the right to sell their land. Polish counties simultaneously received self-governing status, which allowed them to define the priorities for local development. Counties received additional responsibility for land management and quickly demonstrated strong support for land conversion, which was perceived as a factor of local development. This paper argues that decentralization and the extension of private control over land have led to a loss of rural landscapes in Poland because farmers, county governments, and rural society in general gained from the conversion of agricultural to housing land. Rapid urbanization has significantly reduced the availability of open space around cities and threatened valuable landscapes, for it has occurred in the absence of environmental safeguards. This paper reports findings from research in two counties, located in regions with diverse economic growth rates. Decentralization is particularly problematic if tax regulations and intergovernmental fiscal relations reward local authorities for urbanization but not environmental protection. Note: This version was published online in June 2005 with the cover date of August 2004.     

New eco-friendly proposal for the crystallization of beet raw juice

In the past years we evaluated different strategies with the aim of eliminating completely from the beet sugar factory, the traditional calco-carbonic purification process taking into account the well-known problems related to the utilization of lime and the production of carbonation sludge.To complete the picture of the possible solutions to be adopted for the elimination of the traditional purification process, we tested and evaluated in laboratory and in pilot plants a new eco-friendly proposal.The results obtained, as well as the proposed flow-sheet and some economic evaluations, are presented and discussed.     

Dynamic strength tests for low elongation lanyards.

Lanyards are still important and common components of personal systems protecting against falls from a height. Experience with dynamic strength tests of lanyards indicates that test methods based on EN and ISO standards do not make objective assessment possible. This paper presents the results of theoretical and laboratory investigations of the performance of adjustable lanyards during fall arrest. The obtained results indicate that methods of testing and assessment based on those standards demonstrate considerable shortcomings when applied to low elongation lanyards. The assumptions for improved requirements and test methods of lanyards made of, e.g., steel wire and aramid ropes are also presented.     

Multibody model of the human upper extremity for fracture simulation

About 3.8 million people are injured in accidents at work in Europe every year. The resulting high costs are incurred by the victims themselves, their families, employers and society. We have used a numerical simulation to reconstruct accidents at work for several years. To reconstruct these accidents MADYMO R7.5 with a numerical human model (pedestrian model) is used. However, this model is dedicated to the analysis of car-to-pedestrian accidents and thus cannot be fully used for reconstructing accidents at work. Therefore, we started working on the development of a numerical model of the human body for the purpose of simulating accidents at work. Developing a new numerical model which gives an opportunity to simulate fractures of the upper extremity bones is a stage of that work.     

Efficiency of Filtering Materials Used in Respiratory Protective Devices Against Nanoparticles

The basic aim of this research was to establish the efficiency of filtering materials widely used in respiratory protection devices with particular interest in their porosity, degree of electric and changeable process parameters, such as the flow rate of the test nanoaerosol and the size range of nanoparticles. Tests were carried out with an NaCl solid aerosol of 3.2 × 10⁵ particles/cm³ for the range of particle size of 7–270 nm, at aerosol flow rate of 1800, 2700, 3600, 4500 and 5400 L/h. The tests showed that electrospun nonwovens were the most effective filtering materials for nanoparticles over 20 nm. Melt-blown electret nonwovens with lower porosity than electrospun nonwovens had higher values of penetration of 1%–4%. Those materials provided very efficient protection against nanoparticles of certain sizes only.     

The Influence of Anchor Devices on the Performance of Retractable Type Fall Arresters Protecting Against Falls From a Height

Retractable type fall arresters are part of the equipment used for protecting people against falls from a height. They are an intermediate part between full body harness worn by a man and the structural anchor at the worksite. The most important task of retractable type fall arresters is to arrest people’s falls and to reduce their harmful consequences. Information received from users as well as laboratories testing protective equipment indicates that the performance of such equipment is incorrect under specific conditions. The paper is concerned with an analysis of the conditions in which retractable type fall arresters demonstrate intermittent performance and with an explanation of that phenomenon. The results of tests investigating anchor devices and the performance of retractable type fall arresters are presented. External and internal factors contributing to intermittent performance have been determined and guidelines for safer use of these devices have been developed.     

Experimental Verification of the Computerized Method for Work Space Optimization in Conditions of Static Work

The aim of this study was to verify a theoretical model for upper extremity work space optimization. In order to do that, experimental studies were conducted in which two parameters of the electromyography (EMG) signal were analyzed: AMP (amplitude calculated as Root Mean Square) and SZC (coefficient of the slope of the regression line between time and Zero Crossing values). Values of forces in muscles (parameter MOD) were calculated from theoretical studies. A comparison of experimental (AMP, SZC) and theoretical (MOD) parameters was performed by analyzing the coefficient of correlation between those parameters and differentiation of muscular load according to external load value. Analysis showed that the theoretical and experimental results are in step, which means that the developed model can be used for upper extremity work space optimization.     

EU Directive,ICNIRP Guidelines and Polish Legislation on Electromagnetic Fields

This review describes the general provisions of and the philosophy behind European Directive 2004/40/EC and ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines. As an example of national legislation on the protection of workers against excessive electromagnetic field exposure, regulations established in Poland are summarized. The problems of a practical implementation of the Directive’s provisions are discussed.     

Health risk assessment of occupational exposure to a magnetic field from magnetic resonance imaging devices.

Health care staff who operate magnetic resonance imaging (MRI) devices are exposed to a static magnetic field of significant spatial heterogenity always produced by MRI magnets during the whole shift. They can also be exposed to pulses of a time-varying magnetic field (gradient field) present only during patients' examinations. The level of the workers' exposure depends both on the type of the magnet and on the ergonomic design of each MRI device. The paper presents methods used for measuring and assessing workers' exposure. It also discusses the results of inspection measurements carried out next to approximately 20 MRI devices of approximately 0.2-2.0 T. The presented characteristic and overview of the variability of workers' exposure to a variety of MRI devices supports the need for data on monitoring occupational exposure to MRI. International exposure assessment standards and guidelines (International Commission on Non-Ionizing Radiation Protection [ICNIRP], Institute of Electrical and Electronics Engineers [IEEE], American Conference of Governmental and Industrial Hygienists [ACGIH], European Commission directive), and those established in Poland are also compared.