Efficient removal of triphenylmethane dyes from aqueous medium by in situ electrogenerated Fenton's reagent at carbon-felt cathode

Fenton's reagent (Fe2+ +H2O2) has been electrogenerated in situ in an undivided electrolytic cell from the effective reduction of Fe3+ and O2 at carbon-felt cathode for the treatment of aqueous solutions of four triphenylmethane dyes (TPMs), namely malachite green (MG), crystal violet (CV), methyl green (MeG) and fast green FCF (FCF), at pH 3.0 and room temperature. MG has been used as a model among them to study the influence of some experimental parameters on the decay kinetics, COD removal and current efficiency. The results in such electro-Fenton system are explained in terms of the many parasitic reactions involving .OH. Higher efficiency values are obtained with rising organic content and decreasing applied current. The first stage of the mineralization process, involving aromatic by-products, leads to fast decoloration as well as quick initial COD removal that fit well to a pseudo-first-order kinetics. At prolonged electrolysis time, the mineralization rate and efficiency decrease due to the formation of hardly oxidizable compounds and the enhancement of wasting reactions. Solutions of all four TPMs are quickly degraded following a pseudo-first-order decay kinetics. The absolute rate constant (kTPM) for their reaction with .OH increases in the order MeG相似文献   

Removal of propham from water by using electro-Fenton technology: kinetics and mechanism

The removal of a carbamate herbicide, propham, from aqueous solution has been carried out by the electro-Fenton process. Hydroxyl radical, a strong oxidizing agent, was generated catalytically and used for the oxidation of propham aqueous solutions. The degradation kinetics of propham evidenced a pseudo-first order degradation. The absolute rate constant of second order reaction kinetics between propham and ()OH was determined as (2.2+/-0.10)x10(9)m(-1)s(-1). The mineralization of propham was followed by the organic carbon (TOC) removal. The optimal Fe(3+) concentration was found as 0.5mM at 300mA. The 94% of initial TOC of 0.25mM propham solution was removed in 8h at the optimal conditions by using the cathode area to solution volume ratio of 3.33dm(-1). The maximum mineralization current efficiency values were obtained at 60mA in the presence of 0.5mM Fe(3+). During the electro-Fenton treatment, several degradation products were formed. These intermediates were identified by using high performance liquid chromatography, liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry and ion chromatography analysis. The identified by-products allowed proposing a pathway for the propham mineralization.     

INCREASING WATER SUPPLY BY MIXING OF FRESH AND SALINE GROUND WATERS1

ABSTRACT: The quality of ground water in any aquifer takes its final form due to natural mixture of waters, which may originate from different sources. Water quality varies from one aquifer to another and even within the same aquifer itself. Different ground water quality is obtained from wells and is mixed in a common reservoir prior to any consumption. This artificial mixing enables an increase in available ground water of a desired quality for agricultural or residential purposes. The question remains as to what proportions of water from different wells should be mixed together to achieve a desired water quality for this artificial mixture. Two sets of laboratory experiments were carried out, namely, the addition of saline water to a fixed volume of fresh water. After each addition, the mixture volume and the electric conductivity value of the artificially mixed water were recorded. The experiments were carried out under the same laboratory temperature of 20°C. A standard curve was developed first experimentally and then confirmed theoretically. This curve is useful in determining either the volume or discharge ratio from two wells to achieve a predetermined electrical conductivity value of the artificial mixture. The application of the curve is given for two wells within the Quaternary deposits in the western part of the Kingdom of Saudi Arabia.     

Modeling individual tree mortality for crimean pine plantations

Individual tree mortality model was developed for crimean pine (Pinus nigra subsp. pallasiana) plantations in Turkey. Data came from 5 year remeasurements of the permanent sample plots. The data comprises of 115 sample plots with 5029 individual trees. Parameters of the logistic equation were estimated using weighted nonlinear regression analysis. Approximately 80% of the observations were used for model development and 20% for validation. The explicatory variables in the model were ratio of diameter of the subject tree and basal area mean diameter of the sample plot as measure of competition index for individual trees, basal area and site index. All parameter estimates were found highly significant (p < 0.001) in predicting mortality model. Chi-square statistics indicate that the most important variable is d / d(q), the second most important is site index, and the third most important predictor is stand basal area. Examination of graphs of observed vs. predicted mortality rates reveals that the mortality model is well behaved and match the observed mortality rates quite well. Although the phenomenon of mortality is a stochastic, rare and irregular event, the model fit was fairly good. The logistic mortality model passed a validation test on independent data not used in parameter estimation. The key ingredient for obtaining a good mortality model is a data set that is both large and representative of the population under study and the data satisfy both requirements. The mortality model presented in this paper is considered to have an appropriate level of reliability.     

Decolorization of remazol yellow RR gran by white rot fungus Phanerochaete chrysosporium

In this study, the removal of color, chemical oxygen demand (COD) and aromatic group from one of the azo dyes, Remazol Yellow RR Gran, had been carried out by using one of the white rot fungi, Phanerochaete chrysosporium. Experimental studies were performed in growth media containing different amounts of dye and glucose. Color measurements were done at 436nm wavelength using spectrophotometer while aromatic group measurements were done at 280 nm wavelength using UV/Visible spectrophotometer. As a result of this study the values of the removable color concentration were determined as 10 mgl(-1) and lower. The optimum medium glucose concentration was determined to be 2 gl(-1) during color removal processes, aromatic group measurements were done in samples in the UV region at 280 nm wavelength. As a result of the measurements, it was shown that certain amount of aromatic group remained in the model wastewater at the end of the process.     

Using of leaching reactant obtained from mill scale in hydrometallurgical copper extraction

Environmental Science and Pollution Research - This study, which covered a set of leaching processes at a few stages, investigated the inclusion of iron found in mill scale, which is a waste of the...     

Sequential extraction of cadmium in different soil phases and plant parts from a former industrialized area

Cd concentrations in mobile phases of soil are more representative than total Cd concentration for estimating Cd bioavailability, physicochemical reactivity and mobility. In this study, selective sequential extraction procedures were used to determine Cd in different soil phases. Soil samples and plants grown in these soils were collected from a serpentine and copper-mining area in Maden-Elazig-Turkey. The extracted fractions were exchangeable/carbonate, reducible-iron/manganese oxides, oxidizable-organic matter and sulfides, and residual phases except silicates. Concentrations of Cd in soils and plant samples were determined by flame atomic absorption spectrometry and inductively coupled plasma-mass spectrometry. We found that Cd concentrations in the EDTA and NH₂OH·HCl extracts are higher in most soil samples compared to the other extracts. We conclude that Cd levels in mobile phases are unexpectedly high. The observed Cd concentrations are in ranges of 0.03–3.4 mg kg⁻¹ for soil and 0.02–2.5 mg kg⁻¹ for plant parts. The percentages of cadmium up to 56% in exchangeable and carbonates fractions were observed to be significantly higher than in those values less than 2% reported in literature. This study has shown that the modified extraction method can be usefully applied to determine Cd concentrations in potentially mobile phase of soil. Furthermore, it was concluded that Brassicasea and Rumex leaves can be used as hyperaccumulator plants because their translocation factor and/or enrichment coefficient values were found to be higher than 1.0.     

Assessing monthly average solar radiation models: a comparative case study in Turkey

Solar radiation data are required by solar engineers, architects, agriculturists, and hydrologists for many applications such as solar heating, cooking, drying, and interior illumination of buildings. In order to achieve this, numerous empirical models have been developed all over the world to predict solar radiation. The main objective of this study is to examine and compare 147 solar radiation models available in the literature for the prediction of monthly solar radiation at Ankara (Turkey) based on selected statistical measures such as percentage error, mean percentage error, root mean square error, mean bias error, and correlation coefficient. Our results showed that Ball et al. (Agron J 96:391?C397, 2004) model and Chen et al. (Energy Convers Manag 47:2859?C2866, 2006) model performed best in the estimation of solar radiation on a horizontal surface for Ankara.     

Establishing ecological networks for habitat conservation in the case of ?e?me�CUrla Peninsula, Turkey

The study involves the Çe?me?CUrla Peninsula, where habitat fragmentation and loss, which threaten biological diversity, have become an urgent matter of concern in recent decades. The study area has been subjected to anthropogenic pressures and alterations due to ongoing and impending land uses. Therefore, ecological networks, as an appropriate way to deal with habitat fragmentation and loss and to improve ecological quality, were identified in the study area as one of the early attempts in the country to maintain its rich biodiversity. In this sense, core areas and ecological linkages as primary components of ecological networks were established on the basis of sustaining natural habitats. A GIS-based model was created to identify core areas and to facilitate the ecological connectivity. The modeling process for core areas and corridors combined 14 and 21 different variables, respectively. The variables were used as environmental inputs in the model, and all analyses were materialized in ArcGIS 9.2 using grid functions of image analysis and spatial analyst modules. As a result, six core areas and 36 corridor alternatives were materialized. Furthermore, some recommendations for the implementation and management of the proposed ecological networks were revealed and discussed.