Occurrence of alternative flame retardants in indoor dust from New Zealand: indoor sources and human exposure assessment

Due to worldwide restrictions on polybrominated diphenyl ethers (PBDEs), the demand for alternative flame retardants (AFRs), such as organophosphate flame retardants (OPFRs), novel brominated FRs (NBFRs) and hexabromocyclododecanes (HBCDs), has recently increased. Little is known about human exposure to NBFRs and OPFRs and that their levels in dust have been scarcely evaluated worldwide. To increase the knowledge regarding these chemicals, we measured concentrations of five major NBFRs, ten OPFRs and three HBCD isomers in indoor dust from New Zealand homes. Dust samples were taken from living room floors (n=34) and from mattresses of the same houses (n=16). Concentrations (ngg(-1)) of NBFRs were: 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) (<2-175), decabromodiphenyl ethane (DBDPE) (<5-1430), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB) (<2-2285) and bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH) (<2-640). For OPFRs, concentrations (ngg(-1)) ranged between: tri-ethyl-phosphate (TEP) (<10-235), tri-n-butyl-phosphate (TnBP) (<20-7545), tris-(2-chloroethyl)-phosphate (TCEP) (<20-7605), tris-(1-chloro-2-propyl) phosphate (TCPP) (20-7615), tri-(2-butoxyethyl)-phosphate (TBEP) (50-27325), tris-(2,3-dichloropropyl)-phosphate (TDCPP) (20-16560), tri-phenyl-phosphate (TPhP) (20-35190), and tri-cresyl-phosphate (TCP) (<50-3760). HBCD concentrations fell in the range <2-4100ngg(-1). BTBPE, DBDPE, TBPH, TBEP, and TnBP showed significant positive correlation (p<0.05) between their concentrations in mattresses and the corresponding floor dust (n=16). These data were used to derive a range of plausible exposure scenarios. Although the estimated exposure is well below the corresponding reference doses (RfDs), caution is needed given the likely future increase in use of these FRs and the currently unknown contribution to human exposure by other pathways such as inhalation and diet.     

Heavy metal contamination from mining sites in South Morocco: 1. Use of a biotest to assess metal toxicity of tailings and soils

Our work was conducted to investigate the heavy metal toxicity of tailings and soils collected from five metal mines located in the south of Morocco. We used the MetPAD biotest Kit which detects the toxicity specifically due to the heavy metals in environmental samples. This biotest initially developed to assess the toxicity of aquatic samples was adapted to the heterogeneous physico-chemical conditions of anthropogenic soils. Contrasted industrial soils were collected from four abandoned mines (A, B, C and E) and one mine (D) still active. The toxicity test was run concurrently with chemical analyses on the aqueous extracts of tailings materials and soils in order to assess the potential availability of heavy metals. Soil pH was variable, ranging from very acidic (pH 2.6) to alkaline values (pH 8.0-8.8). The tailings from polymetallic mines (B and D) contained very high concentrations of Zn (38,000-108,000 mg kg(-1)), Pb (20,412-30,100 mg kg(-1)), Cu (2,019-8,635 mg kg(-1)) and Cd (148-228 mg kg(-1)). Water-extractable metal concentrations (i.e., soil extracts) were much lower but were highly toxic as shown by the MetPAD test, except for soils from mines A, E and site C3 from mine C. The soil extracts from mine D were the most toxic amongst all the soils tested. On this site, the toxicity of soil water extracts was mainly due to high concentrations of Zn (785-1,753 mg l(-1)), Cu (1.8-82 mg l(-1)) and Cd (2.0-2.7 mg l(-1)). The general trend observed was an increase in metal toxicity measured by the biotest with increasing available metal contents in tailings materials and soils. Therefore, the MetPAD test can be used as a rapid and sensitive predictive tool to assess the heavy metal availability in soils highly contaminated by mining activities.     

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C₅–C₃₄) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs = 0.10–1.10 ng L⁻¹, r² = 0.9940–0.9994) and for soil samples (LODs = 0.10–0.77 ng kg⁻¹, r² = 0.9946–0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.     

砂土与EPS颗粒混合的轻质土(LSES)临界循环应力比的试验研究

循环荷载下,砂土与EPS颗粒混合的轻质土(LSES)存在临界循环应力比Sth,将割线弹性模量衰减系数δ与循环次数的关系曲线能保持平缓的最大循环应力比定义为Sth,它是结构稳定与破坏两种状态的界限指标,根据动三轴试验结果,认为影响Sth的主要因素有围压、水泥掺量和EPS颗粒含量。一般来说,水泥掺量的增加、围压和EPS颗粒含量的减小均会提高Sth,但由于高围压下的结构重塑,水泥掺量低且EPS颗粒含量高的试样的Sth表现出一些不同的性状。     

Cultivation modes and deficit irrigation strategies to improve 13C carbon isotope,photosynthesis, and winter wheat productivity in semi-arid regions

Environmental Science and Pollution Research - Determining the effect of ridge-furrow cultivation mode on 13C carbon isotope discrimination, photosynthetic capacity, and leaf gas exchange...     

Molecular mechanism of zinc neurotoxicity in Alzheimer’s disease

Environmental Science and Pollution Research - Zinc (Zn) is an essential trace element for most organisms, including human beings. It plays a crucial role in several physiological processes such as...     

Advanced microbial fuel cell for waste water treatment—a review

Environmental Science and Pollution Research - Petroleum, coal, and natural gas reservoir were depleting continuously due to an increase in industrialization, which enforced study to identify...     

Association between meteorological indicators and COVID-19 pandemic in Pakistan

Environmental Science and Pollution Research - This study was designed to investigate the impact of meteorological indicators (temperature, rainfall, and humidity) on total COVID-19 cases in...     

IMPACT OF IRRIGATION WELLS ON BASEFLOW OF THE BIG BLUE RWER,NEBRASKA1

ABSTRACT: The Kansas-Nebraska Big Blue River compact requires that the state of Nebraska insure a minimum flow of the Big Blue River across the state line. There are two options that the state of Nebraska may use to ensure minimum flows. The obvious option is to limit surface-water irrigators along the river. However, under the terms of the compact, a second option may be to regulate irrigation wells that are within one mile of the river and were installed after November 1, 1968. The objective of this study is to quantify the effects of 17 irrigation wells that may be regulated on baseflow of the Big Blue River. A finite-element model is used to study the hydrogeologic system between DeWitt and Beatrice, Nebraska. The 17 wells that may be regulated are located between these towns and are developed in sediments deposited in a cross-cutting paleovalley anchor alluvium associated with the Big Blue River. While there wore considerable existing data, additional data were gathered by drilling an additional nine test holes, conducting several aquifer tests, stream-stage measurements, and baseflow calculation through extensive stream-discharge measurements, establishment of a ground water-level monitoring network, determining the amount of water pumped for irrigation and municipal use in the area, and a short-term precipitation network. The model was calibrated using observed baseflow and ground water level data. The model clearly shows that regulating the 17 wells to maintain baseflow would have a minimal effect on the overall water budget. This is reasonable, especially considering that there are over 250 irrigation wells in the project area. The 17 wells considered pumped only 6 percent of the total pumpage within the modeled area during the irrigation season of 1984. The computer model provides the documentation needed to demonstrate this fact. Although much of the resources spent and a significant amount of hydrogeologic data are being collected over a period of three years on a relatively small area, the simulation model could be improved through further field testing of the aquifer and stream-bed sediment characteristics and quantification of ground water recharge, discharge, and evapotranspiration rates.     

Modeling long-term attainable soil organic carbon sequestration across the highlands of Ethiopia

Environment, Development and Sustainability - The objectives of this study across the highlands of Ethiopia were: (i) to characterize the association between soil organic carbon (SOC) stocks and...