Ambient halocarbon mixing ratios in 45 Chinese cities

During this study 158 whole air samples were collected in 45 Chinese cities in January and February 2001. The spatial distribution of different classes of halocarbons in the Chinese urban atmosphere, including chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), hydrofluorocarbons (HFCs), Halon-1211, and other chlorinated compounds is presented and discussed. Most of these compounds were enhanced compared to background levels. However, the mean enhancement of CFCs was relatively small, with CFC-12 and CFC-11 increases of 6% (range 1–31%) and 10% (range 2–89%), respectively, with respect to the global background. On the contrary, strongly enhanced levels of CFC replacement compounds and halogenated compounds used as solvents were measured. The average Halon-1211 concentration exceeded the background of 4.3 pptv by 75% and was higher than 10 pptv in several cities. Methyl chloride mixing ratios were also strongly elevated (78% higher than background levels), which is likely related to the widespread use of coal and biofuel in China.     

Size-resolved effective density of submicron particles during summertime in the rural atmosphere of Beijing, China

Particle density is an important physical property of atmospheric particles.The information on high time-resolution size-resolved particle density is essential for understanding the atmospheric physical and chemical aging processes of aerosols particles.In the present study,a centrifugal particle mass analyzer(CPMA) combined with a differential mobility analyzer(DMA) was deployed to determine the size-resolved effective density of 50 to 350 nm particles at a rural site of Beijing during summer 2016.The measured particle effective densities decreased with increasing particle sizes and ranged from 1.43 to 1.55 g/cm~3,on average.The effective particle density distributions were dominated by a mode peaked at around 1.5 g/cm~3 for 50 to350 nm particles.Extra modes with peaks at 1.0,0.8,and 0.6 g/cm3 for 150,240,and 350 nm particles,which might be freshly emitted soot particles,were observed during intensive primary emissions episodes.The particle effective densities showed a diurnal variation pattern,with higher values during daytime.A case study showed that the effective density of Aitken mode particles during the new particle formation(NPF) event decreased considerably,indicating the significant contribution of organics to new particle growth.     

Methylmercury exposure and health effects in humans: a worldwide concern

The paper builds on existing literature, highlighting current understanding and identifying unresolved issues about MeHg exposure, health effects, and risk assessment, and concludes with a consensus statement. Methylmercury is a potent toxin, bioaccumulated and concentrated through the aquatic food chain, placing at risk people, throughout the globe and across the socioeconomic spectrum, who consume predatory fish or for whom fish is a dietary mainstay. Methylmercury developmental neurotoxicity has constituted the basis for risk assessments and public health policies. Despite gaps in our knowledge on new bioindicators of exposure, factors that influence MeHg uptake and toxicity, toxicokinetics, neurologic and cardiovascular effects in adult populations, and the nutritional benefits and risks from the large number of marine and freshwater fish and fish-eating species, the panel concluded that to preserve human health, all efforts need to be made to reduce and eliminate sources of exposure.     

An analysis for the causes of accidents of repair,maintenance, alteration and addition works in Hong Kong

This study unveils causes of accidents in repair, maintenance, alteration and addition (RMAA) work. RMAA work is playing an increasingly important role in developed societies, including Hong Kong. Safety problems associated with RMAA work in Hong Kong has reached an alarming level. In view of rapid expansion of the RMAA sector and rising proportion of accidents in the construction industry, there is a pressing need to investigate causes of RMAA accidents. Structured interviews were conducted with RMAA contractors to explore causes of accidents in the RMAA sector. A two-round Delphi method with 13 safety experts was subsequently employed to verify the interview findings and rank the relative degree of importance for various causes of accidents. Accidents happen in RMAA work due to intersection of reasons. One of the root causes of accidents in RMAA works is low safety awareness of RMAA workers; however, wider organizational and industrial factors are not negligible. This study sheds light on why accidents happen in the RMAA sector. Only when the factors leading to accidents are identified can effective measures be made.     

Students' environmental concerns and opinions: a Chinese perspective

This study aims at comparing broadly the environmental concerns and opinions between Hong Kong and Beijing students. This is based on an earlier study in Australia which adopted a qualitative approach, using five open-ended question items. In their written comments the children's environmental opinions and concerns were explored. In general, upper primary students tended to be concerned more about the social environment relating to society, while junior and senior secondary students expressed more concern about the social environment relating to the nation and global issues.     

Analysis and characterization of cultivable heavy metal-resistant bacterial endophytes isolated from Cd-hyperaccumulator Solanum nigrum L. and their potential use for phytoremediation

This study investigates the heavy metal-resistant bacterial endophytes of Cd-hyperaccumulator Solanum nigrum L. grown on a mine tailing by using cultivation-dependent technique. Thirty Cd-tolerant bacterial endophytes were isolated from roots, stems, and leaves of S. nigrum L. and classified by amplified ribosomal DNA-restriction analysis into 18 different types. Phylogenetic analysis based on 16S rDNA sequences showed that these isolates belonged to four groups: Actinobacteria (43%), Proteobacteria (23%), Bacteroidetes (27%) and Firmicutes (7%). All the isolates were then characterized for their plant growth promoting traits as well as their resistances to different heavy metals; and the actual plant growth promotion and colonization ability were also assessed. Four isolates were re-introduced into S. nigrum L. under Cd stress and resulted in Cd phytotoxicity decrease, as dry weights of roots increased from 55% to 143% and dry weights of above-ground from 64% to 100% compared to the uninoculated ones. The total Cd accumulation of inoculated plants increased from 66% to 135% (roots) and from 22% to 64% (above-ground) compared to the uninoculated ones. Our research suggests that bacterial endophytes are a most promising resource and may be the excellent candidates of bio-inoculants for enhancing the phytoremediation efficiency.     

The relationship between mixed-liquor particle size and solids retention time in the activated sludge process

Particle size distribution (PSD) analysis was used to evaluate the quality of mixed liquors collected from different activated sludge process modifications (i.e., conventional activated sludge, modified Ludzack-Ettinger, high-purity oxygen, step-anoxic, and oxidation ditch). An experiment protocol was developed to define the allowable sample holding time and provide representative and repeatable results. Samples of 26 treatment plants, with a total of 37 samples, were tested. A new indicator, called mean particle size (MPS), was introduced to describe the integrated mean particle size. The results of MPSs of three cut-off sizes (0.5 to 50, 100, and 200 microm) showed that the average size of mixed-liquor biosolids increased with increasing solids retention time (SRT), and the number of particles in the sedimentation supernatant decreased with increasing SRT. Particle deflocculation occurred after excessive sample holding time, and analysis within 12 hours generally eliminated sample holding problems. The results provide a methodology using PSD for characterizing mixed-liquor biosolids.     

Carbon content of common airborne fungal species and fungal contribution to aerosol organic carbon in a subtropical city

Interest in the role and contribution of fungi to atmospheric aerosols and processes grows in the past decade. Substantial data or information such as fungal mass or carbon loading to ambient aerosols is however still lacking. This study aimed to quantify the specific organic carbon content (OC per spore) of eleven fungal species commonly found airborne in the subtropics, and estimated their contribution to organic carbon in aerosols. The specific OC contents showed a size-dependent relationship (r = 0.64, p < 0.05) and ranged from 3.6 to 201.0 pg carbon per spore or yeast cell, giving an average of 6.0 pg carbon per spore (RSD 51%) for spore or cell size less than 10 μm. In accounting for natural variations in the composition and abundance of fungal population, weighted-average carbon content for field samples was adopted using the laboratory determined specific OC values. An average of 5.97 pg carbon per spore (RSD 3.8%) was enumerated from 28 field samples collected at the university campus. The mean fungal OC concentration was 3.7, 6.0 and 9.7 ng m^?3 in PM_2.5, PM_2.5–10 and PM₁₀, respectively. These corresponded to 0.1%, 1.2% and 0.2% of the total OC in PM_2.5, PM_2.5–10 and PM₁₀, respectively. In the study period, rain provided periods with low total OC but high fungal prevalence and fungi contributed 7–32% OC in PM_2.5–10 or 2.4–7.1% OC in PM₁₀. More extensive studies are deserved to better understand the spatial-, temporal- and episodic dependency on the fungal OC contribution to the atmospheric aerosols.     

Functional gene expression of oil-degrading bacteria resistant to hexadecane toxicity

Contamination with oil poses a threat to the environment and to human health worldwide. Biological methodologies have proved to be economical, versatile and efficient for the remediation of pollutants. In this paper, a highly efficient oil-degrading bacterial strain USTB-2 was isolated from an oil production well of Dagang oil field in Tianjin, China. The 16S rRNA sequence of USTB-2 showed 100% similarity with that of Bacillus subtilis BSn5. Hexadecane is one of the most important components in petroleum. The half inhibitory ratio (IC₅₀) of hexadecane inhibited organisms, determined by microcalorimetry, was lower in USTB-2 than in B. BSn5. The results indicate that the strain USTB-2 degrades hexadecane to make it less toxic compared with the normal strain. RT-PCR was used to evaluate the expression of oil-degrading enzymes, specifically 4-hydroxyphenylacetate 3-monooxygenase genes (HPMO). A sharp increase in the expression of HPMO genes was observed for USTB-2, while the expression of HPMO genes in reference strain B. BSn5 remained relatively stable. These methods can be used to study the metabolic potential of microorganisms for in situ oil decontamination.