王甫洲工程泄水闸围堰基础高喷防渗墙施工

王甫洲水利枢纽工程泄水闸施工围堰基础主要为砂卵石层，结构中密～密实，属较强～极强透水层。使用改制的ＢＺＫ—３Ａ 型喷灌机，大水量、大浆量、不分序连续施工，高压定喷构筑围堰基础防渗板墙。经围井开挖检查，钻孔及围井挖后抽水试验、泄水闸基坑开挖后的防渗效果分析表明，高喷防渗板墙厚度、墙体强度及墙体渗透系数均满足设计要求     

储煤筒仓系统爆炸危险因素分析

结合火力发电厂输煤系统运行状况，分析了储煤筒仓系统的爆炸危险因素，并作出了具体的预防及应对措施，对相关企业的安全工作有较好的参考价值。     

SF6绝缘电器的运行维护及其发展方向

SF6作为一种优良的绝缘介质在高压灭弧领域虽然得到了广泛的应用,但同时也存在一定的问题,其中具有代表性的就是它的泄漏及含水量超标。主要介绍了它们的危害、原因、对策及未来的发展方向。     

内窥镜检查在电站锅炉内部检验中的应用

工业内窥镜是电站锅炉内部检验中不可或缺的设备,主要用来对集箱、减温器、受热面管等内部人眼无法观察到的地方进行检验,从而确定承压部件内部是否存在严重影响锅炉安全运行的缺陷.本文通过对锅炉内窥实例进行分析和总结,阐述内窥镜检查在锅炉内检中的重要性并给相关工作人员提供借鉴与参考.     

Simultaneous treatment of PVC and oyster-shell wastes by mechanochemical means

This work presents a new process for dechlorinating poly-vinyl chloride (PVC) by the use of oyster-shell waste. The process consists of milling of PVC waste with oyster-shell waste, followed by washing the milled sample with water. The milling of PVC and oyster-shell mixture results in size reduction and rupture in bonds, leading to mechanically induced reactions between the two to form CaCl2 and hydrocarbon with C=C bonds. Washing the milled mixtures with water at room temperature allows complete removal of chlorine from the milled sample. More than 95% of chlorine in PVC was removed when 2h grinding is conducted for the mixture. The present process could offer a potential route to the handling and disposal of oyster-shell and PVC wastes.     

竹炭对废水中Cu2+的吸附

探讨了竹炭粒径、加入量、溶液 pH、吸附时间、Cu2+初始质量浓度等因素对竹炭吸附 Cu2+效果的影响.实验结果表明:竹炭对废水中Cu2+有很好的吸附效果,当竹炭粒径小于0.15 mm、加入量为 16 g/L、溶液 pH 为 6.0、Cu2+初始质量浓度 25 mg/L、吸附时间为 1.5 h 时,竹炭对 Cu2+的去...     

纳滤膜处理含锰废水

采用纳滤膜处理电解锰生产过程中产生的含锰废水,考察了操作压力、阻垢剂和反冲洗等因素对膜通量和各金属离子截留率的影响。实验结果表明:操作压力越大,膜通量越大,且膜通量随运行时间延长下降得越快;在操作压力为2.0 MPa的条件下,纳滤膜对Mg2+的截留率为90.69%,对Mn2+的截留率为89.72%,对Ca2+的截留率最高,达100%;加入阻垢剂后,纳滤膜的膜通量比未加入阻垢剂时的膜通量略大;反冲洗4次后,膜通量均可完全恢复。     

Effects of leachate accumulation on landfill stability in humid regions of China

Leachate levels are important to landfill stability and safety. High leachate or water levels often lead to landfill instability, which can cause accidents. Here a case study of a landfill located in a humid region of southern China is presented. Leachate distribution and quality were systematically analyzed, and the effect of leachate level on waste-mass stability was assessed. Boreholes were drilled in the field, samples were analyzed in the laboratory, and a simulation was performed. In addition, the safety and stability of the landfill was evaluated. The leachate level in the landfill was 9–19 m, which was higher than the top of the dam crest (8–20 m). Leachate accounted for more than 1/4 of the total landfill storage capacity. The contaminant concentration of the leachate samples collected directly from the waste body was very high, with large variation among the samples. The mean concentrations of NH₃–N, BOD, and COD from the waste body were 5404, 14,136, and 22,691 mg/L, nearly 2.7, 2.4, and 1.8 times the mean concentrations in the leachate pond, respectively. Three series of shear strength parameters were used in a slope stability analysis, and a limit equilibrium method was used to calculate the factor of safety (Fs). The analysis showed that Fs could be affected by potential anisotropy in the shear strength of the waste. The minimum values of Fs corresponding to series I were 1.84 and 1.17 for units ? and II, respectively. The Fs value of unit II was significantly lower than the safe design value (1.25). In addition, Fs decreased with increase in the normalized height of the leachate level, h/H, where h is the height of the leachate mound and H is the maximum thickness of the landfill. If the h/H values of units I and II are kept below 50% and 40%, respectively, a safe design value of 1.25 for Fs can be guaranteed. Therefore, some measures to prevent risk should be considered.     

用微孔填充理论研究活性炭对有机气体的吸附性能

用微孔填充理论研究了活性炭C40／4对丙酮、甲苯、二氯甲烷有机气体的吸附性能,测试了该活性炭对3种有机气体在不同温度下（288．15,293．15,298．15K）的吸附结果。用D—R方程处理了实验数据,建立了3种有机气体在活性炭C40／4上的等温吸附模型,并将实验测试值与理论预测值进行了比较。实验结果表明：微孔填充理论及D—R方程可很好地描述活性炭C40／4对有机气体的吸附性能,理论预测值与实验测试值的平均相对误差小于3％;有机气体分压较高时,由于发生毛细凝聚,理论预测值较实验测试值偏低。     

炭黑工业烟气余热的回收及利用

对油炉法炭黑生产过程烟气的来源，组成，发生量，特性作了介绍，着重研究了炭黑烟气余热的加收及利用。结果表明，采用余热锅炉串联多级空气预热器，是目前我国炭黑烟气余热回收及利用的最佳方法，采用这种方法，不仅可将高温炭黑烟气的余热量最大限度地回收及利用，同时可满足炭黑收集及烟气净化系统设备对炭黑烟气温度的要求，采用该法，炭黑烟气余热利用率可提高２０％以上，经济效益十分可观。