The use of ionic liquids based on choline chloride for metal deposition: A green alternative?

Ionic liquids are studied intensively for different applications. They tend to be denoted as “green solvents”, largely because of their low vapour pressure. In recent years toxicity and biotoxicity of ionic liquids have also been investigated, which proved that not all of these are “green”. In this paper the use of ionic liquids based on choline chloride and ethylene glycol in electrochemistry is discussed in the context of their use as green solvents. Due to their low toxicity and ready biodegradability, these deep eutectic solvents are promising for the electrodeposition of metals. The influence of the use of these liquids as metal deposition baths on the waste water is investigated. Drag-out was found to be the most influencing parameter on the environmental impact of the process, as it is three times higher compared to classical solutions due to the higher viscosity of the ionic liquid. There are no major changes needed in the rinsing configuration of classic electroplating plants, and ion exchange to remove the metal out of the waste water was not hindered by the presence of the ionic liquid. The formation of by-products during the deposition of metals has to be further investigated and evaluated in consideration of the environmental impact.     

Fuzzy Decision Analysis for Integrated Environmental Vulnerability Assessment of the Mid-Atlantic Region1

A fuzzy decision analysis method for integrating ecological indicators was developed. This was a combination of a fuzzy ranking method and the analytic hierarchy process (AHP). The method was capable of ranking ecosystems in terms of environmental conditions and suggesting cumulative impacts across a large region. Using data on land cover, population, roads, streams, air pollution, and topography of the Mid-Atlantic region, we were able to point out areas that were in relatively poor condition and/or vulnerable to future deterioration. The method offered an easy and comprehensive way to combine the strengths of fuzzy set theory and the AHP for ecological assessment. Furthermore, the suggested method can serve as a building block for the evaluation of environmental policies.     

CEN Standards for Testing and Certifying Personal Protective Equipment—Status Quo and Deficiencies: Examples

By establishing the internal market, the European Union intended to create an area in which safety and health at work are guaranteed. For this purpose, a series of directives was passed.

The EC Directive 89/686/EEC “Approximation of the laws of the Member States relating to personal protective equipment” is of particular interest to the manufacturers of personal protective equipment (PPE). On the European level, harmonized standards, that put these basic health and safety requirements into more concrete terms have to be available. The European Standardizing Committee (CEN) is charged with the elaboration of European standards.

A total of 176 standards relating to personal protective equipment have to be setup; 57 of them are available at present. All CEN members are obliged to transpose them without modification into national standards. Formerly existing national standards have to be withdrawn.

Existing European standards sometimes show deficiencies regarding the specification of requirements according to Directive 89/686/EEC: the standardization of PPE for special fields of application and insufficient harmonization of provisions for different PPE serving the same protective purpose. Test methods are not always described precisely enough.     

An Assessment of Residues from Duct Injection Demonstration Sites

The duct injection retrofit process for flue gas cleanup of sulfur dioxide emissions has been demonstrated at several sites in the United States through a series of U.S. Department of Energy research projects. As a subcontractor on one of the projects, the University of North Dakota Energy & Environmental Research Center performed a comprehensive characterization of four residues from three demonstration sites. The characterization task objective was to facilitate understanding of materials handling and to identify potential disposal and utilization options for these high-volume coal utilization solid residues. Characterization included evaluation of the physical and engineering properties, chemical composition, mineralogy, and leaching potential. Chemical characterization results provided interesting and valuable information from the standpoint of the bulk chemistry and phase assemblages, as well as potential environmental issues associated with the use or disposal of these materials. Results of the chemical and mineralogical characterizations indicate that duct injection residues will be suitable for specific utilization applications and that disposal of these residues should be similar to many conventional coal combustion residues. Significant mineralogical phase changes were noted in long-term leaching experiments.     

The prevention of occupational injuries in two industrial plants using an incident reporting scheme

INTRODUCTION: The aim of this study was to examine whether the introduction of an incident reporting scheme with feedback in two industrial plants had an effect on the number of major incidents. METHOD: An intervention design with measurements before the implementation of the incident reporting scheme and two years later was used to examine the relationship between incident rates, safety climate, the willingness to report incidents and perceived management commitment to safety. RESULTS: The results showed that a successful implementation of an incident reporting scheme was followed by a decline in the incidence of major incidents at a Danish metal plant. A key factor in implementing the scheme was top management commitment, which was lacking at another plant, where the implementation of a similar scheme failed. CONCLUSION: Although the study shows some encouraging results concerning the use of incident reporting schemes to prevent occupational accidents, the possibility to draw causal conclusions is limited in the present study, and further studies are needed before the effectiveness of such schemes can be evaluated with certainty.     

GEOGRAPHIC INFORMATION SYSTEM BASED NONPOINT POLLUTION MODELING1

ABSTRACT: The reauthorization of the Clean Water Act reemphasizes the need for regional scale monitoring and management of nonpoint pollution loads. The magnitude of the task will require that local governments and their consultants integrate information systems and modeling if they are to manage the massive data sets and conduct the array of simulations that will be needed to support the decision making processes. Interfacing geographic information systems (GIS) and nonpoint pollution modeling is a logical approach. The objective of the present study was to use the 37,000-acre area defined by the Kensington Quadrangle sheet in Montgomery County, Maryland, to show that GIS-supported nonpoint pollution modeling is practical and economically attractive. The purpose of the GIS is to estimate the spatial distribution of nonpoint nitrogen, phosphorous, zinc, lead, BOD, and sediment using a model developed by the Northern Virginia Planning District Commission. The system allows the user to change land uses in subareas to simulate the consequences of additional development or alternate management strategies. The tests show that in-house development of this type of special purpose GIS is a practical alternative to vendor supplied systems and that the required databases can be developed quite reasonably.