Effect of chemical amendments on remediation of potentially toxic trace elements (PTEs) and soil quality improvement in paddy fields

Remediation of potentially toxic trace elements (PTEs) in paddy fields is fundamental for crop safety. In situ application of chemical amendments has been widely adapted because of its cost-effectiveness and environmental safety. The main purpose of this research was to (1) evaluate the reduction in dissolved concentrations of cadmium (Cd) and arsenic (As) with the application of chemical amendments and (2) monitor microbial activity in the soil to determine the remediation efficiency. Three different chemical amendments, lime stone, steel slag, and acid mine drainage sludge, were applied to paddy fields, and rice (Oryza sativa L. Milyang 23) was cultivated. The application of chemical amendments immobilized both Cd and As in soil. Between the two PTEs, As reduction was significant (p < 0.05) with the addition of chemical amendments, whereas no significant reduction was observed for Cd than that for the control. Among six soil-related variables, PTE concentration showed a negative correlation with soil pH (r = ?0.70 for As and r = ?0.54 for Cd) and soil respiration (SR) (r = ?0.88 for As and r = ?0.45 for Cd). This result indicated that immobilization of PTEs in soil is dependent on soil pH and reduces PTE toxicity. Overall, the application of chemical amendments could be utilized for decreasing PTE (As and Cd) bioavailability and increasing microbial activity in the soil.     

Optimizing Agricultural Best Management Practices in a Lake Erie Watershed

Implementing agricultural best management practices (BMPs) is influenced by a balance of desired environmental outcomes, economic feasibility, and stakeholder familiarity, the latter taken to be related to BMP acceptability. To explore this balance, we developed a multi‐objective decision support system for allocating BMP type and placement by coupling the Soil and Water Assessment Tool with a nondominated sorted genetic algorithm that minimizes total phosphorus (TP) yields from agricultural hydrologic response units (HRUs) and costs, while using stakeholder BMP familiarity as a constraint; conventional tillage, no tillage, nutrient management, riparian buffers, and contour cropping were explored. Using constraints representing current conditions, the optimization resulted in 59.6 to 81.0% reduction in agricultural TP yield from HRUs at costs ranging between US $0.8 and US $5.3 million. The constrained optimization tended to select mostly single BMPs or at most two BMPs for a given HRU due to these BMPs having higher acceptability to stakeholders. In contrast, the unconstrained case, representing full familiarity, selected 2‐ and 3‐BMP applications. There was little difference in costs between the constrained and unconstrained cases below an 80% TP yield reduction; however, significant differences were found at larger reductions, supporting the value of stakeholder education and extension efforts. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Persistent organochlorine residues in estuarine and marine sediments from Ha Long Bay, Hai Phong Bay, and Ba Lat Estuary, Vietnam

To assess the organochlorine contamination in the northeast coastal environment of Vietnam, a total of 41 surface sediments were collected from Ha Long Bay, Hai Phong Bay, and Ba Lat estuary, and analyzed for their organochlorine content. Organochlorine compounds (OCs) were widely distributed in the Vietnamese coastal environment. Among the OCs measured, DDT compounds predominated with concentrations ranging from 0.31 to 274 ng g(-1). The overall contamination level of DDTs in coastal sediments from northern Vietnam is comparable with those from other Asian countries. However, concentrations exceeding 100 ng g(-1) are comparable with high concentrations reported from India and China, the largest DDT consumers in the world. The overall concentrations of PCBs, HCHs, and chlordanes in surface sediments were in the ranges of 0.04-18.71 ng g(-1), not detected (n.d.) - 1.00 ng g(-1), and n.d. - 0.75 ng g(-1), respectively. Ha Long Bay and Hai Phong Bay were relatively more contaminated with DDTs and PCBs than other regions, respectively. In contrast, the distribution of HCHs was relatively homogeneous. OCs contamination in the coastal environment of Vietnam is closely related to shipping and industrial activities. The levels of DDT compounds in harbors and industrial areas exceeded their sediment quality guideline values suggested by Environment Canada [CCME (Canadian Council of Ministers of the Environment), 2002. Canadian sediment quality guidelines for the protection of aquatic life. In: Canadian Environmental Quality Guidelines. Canadian Council of Ministers of the Environment, Winnipeg, MB] and Australian and New Zealand [ANZECC and ARMCANZ, 2000. National water quality management strategy. Paper No. 4, Australian and New Zealand Guidelines for Fresh and Marine Water Quality, vol. 1, The Guidelines. Australia. Document: http://www.deh.gov.au/water/quality/nwqms/volume1.html], indicating that adverse effects may occur to marine species in that areas.     

Applicability of grid-net detection system for landfill leachate and diesel fuel release in the subsurface

The grid-net system estimating the electrical conductivity changes was evaluated as a potential detection system for the leakage of diesel fuel and landfill leachate. Aspects of electrical conductivity changes were varied upon the type of contaminant. The electrical conductivity in the homogeneous mixtures of soil and landfill leachate linearly increased with the ionic concentration of pore fluid, which became more significant at higher volumetric water contents. However, the electrical conductivity in soil/diesel fuel mixture decreased with diesel fuel content and it was more significant at lower water contents. The electrode spacing should be determined by considering the type of contaminant to enhance the electrode sensitivity especially when two-electrode sensors are to be used. The electrode sensitivity for landfill leachate was constantly maintained regardless of the electrode spacings while that for the diesel fuel significantly increased at smaller electrode spacings. This is possibly due to the fact that the insulating barrier effect of the diesel fuel in non-aqueous phase was less predominant at large electrode spacing because electrical current can form the round-about paths over the volume with relatively small diesel fuel content. The model test results showed that the grid-net detection system can be used to monitor the leakage from waste landfill and underground storage tank sites. However, for a successful application of the detection system in the field, data under various field conditions should be accumulated.     

Analysis on biochemical methane potential of agricultural byproducts with different types of silage storage

The aim of this work is to estimate biogas production by anaerobic digestion of agricultural byproduct silage at the low carbon green village in South Korea. The composition of agricultural byproduct from hot pepper farms was analyzed and it was found to be favorable with anaerobic digestion. In the cases of silage materials, the theoretical methane potentials of all of the ensiled materials were increased with silage storage having an increased range from 103 to 120 % compared to that without ensiling. The biochemical methane potential (BMP) tests showed that the ultimate methane potential of ensiled material was measured to be higher than that of raw material without silage storage, while the first order hydrolysis constant was lower. All of the silage materials containing microbial additives used in this study showed higher ultimate methane potentials and first order hydrolysis constants than raw material and silage material without additives. The change of ultimate methane potential was analyzed over time, and all of the test materials, except Day 2, showed higher ultimate methane potential than raw material, Day 0, and the highest was found on Day 40.     

Environmental assessment on electrokinetic remediation of multimetal-contaminated site: a case study

In this study, an environmental assessment on an electrokinetic (EK) system for the remediation of a multimetal-contaminated real site was conducted using a green and sustainable remediation (GSR) tool. The entire EK process was classified into major four phases consisting of remedial investigations (RIs), remedial action construction (RAC), remedial action operation (RAO), and long-term monitoring (LTM) for environmental assessment. The environmental footprints, including greenhouse gas (GHG) emissions, total energy used, air emissions of criteria pollutants, such as NO_x, SO_x, and PM₁₀, and water consumption, were calculated, and the relative contribution in each phase was analyzed in the environmental assessment. In the RAC phase, the relative contribution of the GHG emissions, total energy used, and PM₁₀ emissions were 77.3, 67.6, and 70.4 %, respectively, which were higher than those of the other phases because the material consumption and equipment used for system construction were high. In the RAO phase, the relative contributions of water consumption and NO_x and SO_x emissions were 94.7, 85.2, and 91.0 %, respectively, which were higher than those of the other phases, because the water and electricity consumption required for system operation was high. In the RIs and LTM phases, the environmental footprints were negligible because the material and energy consumption was less. In conclusion, the consumable materials and electrical energy consumption might be very important for GSR in the EK remediation process, because the production of consumable materials and electrical energy consumption highly affects the GHG emissions, total energy used, and air emissions such as NO_x and SO_x.     

Nitrate-contaminated groundwater remediation by combined autotrophic and heterotrophic denitrification for sulfate and pH control: batch tests

Groundwater remediation was evaluated for combined autotrophic and heterotrophic denitrification under high (154 mg/L as CaCO₃) and low (95 mg/L as CaCO₃) alkaline conditions. Two levels of acetate (47 and 94 mg/L) and ethanol (24 and 48 mg/L) were added to the reactors. Obtained denitrification rates were 2.89, 2.58, 3.55, 1.96, and 2.0 mg-N/L?·?h for high alkaline conditions, whereas under low alkaline conditions has given 2.36, 1.94, 2.47, 2.74, and 2.29 mg-N/L?·?h for control, 47 and 94 mg/L acetate, and 24 and 48 mg/L ethanol, respectively. Nitrite was accumulated for controls but reactors with acetate and ethanol did not accumulate nitrite. Acetate and ethanol addition decreased sulfate to nitrate ratios in the range of 4.5–7.58 for high alkaline conditions (12.77 for control) and 4.43–6.78 for low alkaline conditions (7.90 for control). Acetate was more efficient compared with ethanol in controlling sulfate production and pH maintenance.     

Selective Leaching of Valuable Metals from Waste Printed Circuit Boards

Abstract

This study was carried out to recover valuable metals from the printed circuit boards (PCBs) of waste computers. PCB samples were crushed to smaller than 1 mm by a shredder and initially separated into 30% conducting and 70% nonconducting materials by an electrostatic separator. The conducting materials, which contained the valuable metals, were then used as the feed material for magnetic separation, where it was found that 42% of the conducting materials were magnetic and 58% were nonmagnetic. Leaching of the nonmagnetic component using 2 M H₂SO₄ and 0.2 M H₂O₂ at 85 °C for 12 hr resulted in greater than 95% extraction of Cu, Fe, Zn, Ni, and Al. Au and Ag were extracted at 40 °C with a leaching solution of 0.2 M (NH₄)₂S₂O₃, 0.02 M CuSO₄, and 0.4 M NH₄OH, which resulted in recovery of more than 95% of the Au within 48 hr and 100% of the Ag within 24 hr. The residues were next reacted with a 2 M NaCl solution to leach out Pb, which took place within 2 hr at room temperature.     

Independent factors associated with bicycle helmet use in a Korean population: A cross-sectional study

Objective: Although identification of factors that influence helmet use during bicycle riding is necessary for the selection of groups that require safe cycling education, limited baseline data are available. The aim of the present study was to analyze the rate of helmet use and the demographic factors that were independently associated with helmet use among Korean bicycle riders.

Methods: In this cross-sectional study, we used public data from the Sixth Korean National Health and Nutrition Examination Survey conducted in 2013 and 2014. Helmet users were defined as subjects who always, usually, or frequently wore helmets when cycling. Independent factors associated with helmet use were determined using odds ratios (ORss) adjusted for 5 demographic factors via multivariate logistic regression analysis.

Results: In the total population, 4,103 individuals were bicycle riders; among these, 782 individuals (19.1%) wore helmets. A total of 21.1% of male riders used helmets, compared to 15.5% of female riders (P <.001). The adjusted logistic regression model revealed that female sex (OR = 0.665; 95% confidence interval [CI], 0.554–0.797), teenage status (OR = 0.475, 95% CI, 0.333–0.678), and low household income (OR = 0.657, 95% CI 0.513–0.841) were significantly associated with nonuse of helmets.

Conclusions: Female sex, teenage status, and low household income were independent factors associated with the nonuse of helmets. We identified factors associated with helmet use during bicycle riding through analysis of baseline data on helmet usage.     

Significance of autochthonous Bacillus sp. KK1 on biomineralization of lead in mine tailings

The aim of the study was to isolate and characterize potential autochthonous bacteria for biomineralization of Pb in mine tailings. A total of four bacteria were isolated from the soil samples and assayed for tolerance to Pb and other heavy metals. Isolate KK1 exhibited maximum Pb resistance and was subsequently identified as Bacillus sp. based on the partial 16S rRNA gene sequences. The isolate KK1 reduced the Pb ions and did not harbor pbrT gene. Selective sequential extraction of bioaugmented soil revealed that the isolate significantly reduced (26%) the exchangeable fraction and increased (38%) the carbonate fraction of Pb. X-ray diffraction studies confirmed the role of bacterially induced calcite precipitation in the bioremediation of mine tailings. A significant increase in the urease (334%), DHO (dehydrogenase) (14%), and phosphatase (37%) activity was observed in the bioaugmented mine soil.