Contamination and potential sources of polybrominated diphenyl ethers (PBDEs) in water and sediment from the artificial Lake Shihwa, Korea

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in water and sediment collected from the artificial Lake Shihwa and surrounding creeks. Total concentrations of 23 PBDE congeners in water and sediment ranged from 0.16 to 11.0 ng L⁻¹ and from 1.3 to 18 700 ng g⁻¹ dry weight, respectively. The concentrations of BDE 209 in water and sediment were 1-2 orders of magnitude higher than the total concentrations of other PBDE congeners. The concentrations of total PBDEs and BDE 209 in sediments were the highest compared to previously reported worldwide levels. The highest concentrations of PBDEs in water and sediments were found in creeks near industrial complexes. The PBDE concentrations gradually decreased with increasing distance from the creeks to the inshore and then offshore regions of the lake. BDE 209 was a major congener, accounting for 80% of the total PBDEs in water and sediment, consistent with a high consumption of deca-BDE for the brominated flame retardant market in Korea. Non-parametric multidimensional scaling ordination showed that surrounding creeks are major pathways of PBDE contamination associated with deca-BDE technical mixtures used in industrial complexes around Lake Shihwa. A significant correlation between total organic carbon and total PBDE concentration was found in sediments, and the correlation coefficients for individual PBDE congeners relatively increased from lower to higher brominated congeners.     

Revised relative potency values for PCDDs, PCDFs, and non-ortho-substituted PCBs for the optimized H4IIE-luc in vitro bioassay

While the World Health Organization 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalency factors are useful estimates of relative potencies of mixtures when conducting risk assessments, they are not useful when comparing the results of bioassays such as the H4IIE-luc to concentrations of TCDD equivalents calculated from instrumental analyses. Since there are thousands of dioxin-like compounds (DLCs), one use of screening assays is to determine if all of the aryl hydrocarbon receptor (AhR) active DLCs in a mixture have been accounted for in instrumental analyses. For this purpose, bioassay-specific relative potency (ReP) values are needed. RePs of 21 polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls that exhibit effects mediated through the AhR were determined by use of the H4IIE-luc assay. Different values of RePs are derived, depending on the statistical, curve-fitting methods used to derive them from the dose–response relationships. Here, we discuss the various methods for deriving RePs from in vitro data and their assumptions and effects on values of RePs. Full dose–response curves of 2,3,7,8-TCDD and other representative DLCs were used to estimate effective concentrations at multiple points (e.g., EC20-50-80), which were then used to estimate ReP of each DLC to 2,3,7,8-TCDD.     

Determinants of homeowners' attitudes to the installation of high-voltage overhead transmission lines

This article deals comprehensively with factors which influence attitudes to the placement of high-voltage overhead transmission lines (HVOTLs). It employs an analytical schema which links the initial stimulus of the power lines' proposal in an area to Background and Socio-economic independent variables and a set of mediating variables. From a survey of 600 residents in three different domiciliary settings in Queensland, Australia, results indicate an absence of positive attitudes and, at best, neutral ones to HVOTL placement. By multinomial logistic regression, the study probes the grounds behind negativity and extreme negativity, uncovering direct links between these attitudes and certain of the variables included in the analytical schema.     

Field application of electrokinetic remediation for multi-metal contaminated paddy soil using two-dimensional electrode configuration

In this study, we evaluated the feasibility of in situ electrokinetic remediation for arsenic (As)-, copper (Cu)-, and lead (Pb)-contaminated soil, in a pilot-scale field application with two-dimensional electrode configurations. Square and hexagonal configurations with different electrode spacing, 1 m and 2?m, were investigated under a constant 100 V. A square configuration with electrode spacing of 2 m removed 61.5 % of As, 11.4 % of Cu, and 0.9 % of Pb, respectively, and a hexagonal configuration with the same spacing showed a higher removal efficiency in top (59 % of As, 0–0.5 m) and middle (53 % of As, 0.5–1.0 m) layers, but much lower removal efficiency in the bottom layer (1–1.5 m), which was thought to be due to groundwater flow through periodic rise and fall of tides. Fractionation analysis showed that As bound to Fe–Mn oxyhydroxide was the main form of As removed by the electrokinetic process. The two-dimensional configuration wasted less electrical energy by Joule heating, and required fewer electrode installations, compared to the one-dimensional electrode configuration.     

Effect of culture time on the growth curve and power performance in a microbial fuel cell at a fixed amount of liquid culture

The microbial fuel cell uses the microorganism biochemistry to carry on the energy conversion. Concerning the experimental precision, the colony culture would be replaced by a fixed amount of liquid culture for Microbial fuel cell of Escherichia coli. The anode and cathode chambers whose each volume is 100 mL were utilized, the effective surface area of proton exchange membrane Nafion-117 is about 9 cm². In addition, the electrode area of carbon cloth is 20 cm². Three kinds of Escherichia coli, named as BCRC No. 10322, 10675 and 51534, respectively, would be selected. Results show that the electricity performance of Escherichia coli of BCRC No.51534 is better than the other microorganism studied because of having a larger open circuit voltage of 1.01 V and limiting current 22 mA, the maximum power density of 1342 mW/m^2, and average working power density of 295 mW/m² would be produced. These results would be useful to improve the performance of microbial fuel cell.     

Seasonal Variations and Chemical Forms of Heavy Metals in Soils and Dusts from the Satellite Cities of Seoul, Korea

This research investigated heavy metal pollution of soils and dusts in two representative satellite cities of Seoul, Korea and studied the seasonal variations in metal concentrations through the rainy season and the chemical forms of metals using a sequential extraction analysis. The metal dispersion pattern was illustrated to match with urban structure. Soil and dust samples were collected from the cities of Uijeongbu and Koyang, which are the northern and northwestern satellite cities of Seoul (the capital), before and after rainy season. Concentrations of Cu, Pb and Zn were higher than those of the world averages for soils, and their levels decreased after rain, particularly in highly contaminated samples. Relatively high pH values were found in roadside soils, but no seasonal variation was found after the rainy season. The three metals (Cu, Pb and Zn) in soils and dusts were associated with various chemical fractions of soils and dusts as distinguished by the sequential extraction scheme, and a strong similarity of metal association between soils and dusts was found, which indicates that airborne dust may be a principle source of soil contamination. Copper is uniformly distributed, and Pb is largely associated with the reducible phase. There is an appreciable proportion of total Zn in the exchangeable/water-acid soluble fraction. After the rainy season, the most soluble fractions in soils and dusts were leached away. In terms of mobility and bioavailability of metals in soils and dusts, the order Zn >> Cu > Pb is suggested. Geographical variations of total metals corresponded well with urbanised areas of cities, especially the industrial complex and major motorways.     

The identification of readily bioavailable pollutants in lake shkodra/skadar using semipermeable membrane devices (SPMDs), bioassays and chemical analysis

GOAL, SCOPE AND BACKGROUND: Lake Shkodra/Skadar is the largest lake in the Balkans region and located on the border between Albania to the south and Montenegro to the north. Because of the wide range of endemic, rare or endangered plant and animal species it supports, Lake Shkodra/Skadar and its extensive associated wetlands are internationally recognised as a site of significance and importance (Ramsar site). In recent years, social and economic changes in both Albania and Montenegro have lead to unprecedented levels of urban and industrial effluent entering the lake. Of particular concern is the increasing input of toxic hydrophobic organic pollutants (HOPs) into the lake and the degree to which these compounds are available for uptake by aquatic biota. Semipermeable membrane devices (SPMDs) have been shown to sample the readily bioavailable fraction (dissolved phase) of waterborne HOPs and in doing so provide relevant data for exposure assessment. The aim of the current study was to use SPMD-based sampling in conjunction with appropriate bioassays and chemical analysis to identify readily bioavailable HOPs in the lake. METHODS: SPMDs were constructed and deployed at three sites in the Albanian sector and three sites in the Montenegrin sector of Lake Skadar/Shkodra for 21 days. Following the dialytic recovery of target analytes and size exclusion chromatographic clean-up, aliquots of SPMD samples were subjected to GC-MS scan analysis for major components, GC-MS SIM analysis for 16 priority pollutant polycyclic aromatic hydrocarbons (PP-PAHs) and assayed for EROD-inducing, estrogenic and mutagenic potential using rainbow trout liver cells (RTL-W1), the yeast estrogen screen (YES) and the Ames Test, respectively. RESULTS AND DISCUSSION: A total of 39 compounds were tentatively identified in SPMD samples from the six sampling sites. Alkylated PAHs were the most abundant and ubiquitous compounds present along with various sterols and sterol derivatives. Numerous other compounds remain unidentified. 15 of the 16 targeted PP-PAHs were present in samples from one or more of the sampling sites indicating these compounds are both readily bioavailable and widely distributed in Lake Shkodra/Skadar. Total PP-PAH concentrations ranged between 3991 ng/SPMD and 10695 ng/SPMD. Bioassays carried out on SPMD samples revealed significant EROD-inducing and estrogenic potential at five of the six sampling sites indicating toxicologically relevant compounds are readily available for uptake by resident aquatic biota. EROD-inducing potential was positively correlated with targeted PP-PAH concentration (r2 = 0.74). However, comparison of bioassay- and analytically-derived toxicity equivalents revealed targeted PP-PAHs were responsible for less than 0.06% of the total EROD-inducing potential. CONCLUSIONS AND OUTLOOK: The combination of SPMD-based sampling with appropriate bioassays and chemical analysis provided an effective tool for the identification of environmentally relevant waterborne pollutants in Lake Shkodra/Skadar. Our results show that toxicologically relevant HOPs including EROD-inducing and potentially estrogenic compounds are widely distributed in the lake and readily available for uptake by aquatic biota. Our results also suggest that alkylated PAHs rather than parent compounds may be of greater toxicological relevance in the lake. As anthropogenic influences continue to increase, SPMD-based sampling is expected to play a central role in future research concerned with the identification, monitoring and assessment of the risk posed by HOPs to Lake Shkodra/Skadar's aquatic biota.     

The measurement of corporate environmental performance and its application to the analysis of efficiency in oil industry

This paper addresses a measurement of corporate environmental performance, and its application to the analysis of efficiency in the petroleum firms. In order to measure firms' environmental performance, we suggest a framework called “Gscore” that consists of five categories, namely general environmental management (GEM), input, process, output, and outcome. Gscore is a proxy measure of corporate environmental performance based on voluntary environment, health, and safety (EHS) report and is calculated by aggregating the points of the above five-categories. We apply our measurement framework to the data of 39 firms' voluntary EHS reports which are available on the internet. Ten of them, on which efficiency analysis was conducted with Gscore, assets, employee, and profits, are in petroleum and refining industry. According to our results: (1) a gap is found between rhetoric and practical environmental management stemming from calculating the relation between GEM and data part in 39 EHS reports. (2) On the whole, EHS reports of petroleum firms have something in common, but there are significant differences in the type and amounts of disclosed data among the EHS reports. (3) From the results of efficiency analysis, it is found that the number of employee exerts a considerable influence on determining the relative efficiency of petroleum firms, then Gscore, profits, and assets in sequence. Furthermore, Exxon, Ashland, Phillips Petroleum, and ARCO are shown to be efficient among 10 petroleum firms.