A dynamic statistical experiment for atmospheric interactions

Interactions among atmospheric parameters exist at different scales. The pristine approach for observational or model data analysis involves changing the input parameters one at a time (OAT) and studying the effect on the system. Limitations of this approach for atmospheric applications are discussed. A fractional factorial (FF) based study is evolved and a methodology is outlined involving dynamic graphical analysis. Observational data from the FIFE and HAPEX‐MOBILHY experiments are utilized with a vegetation and soil moisture scheme dynamically coupled in a planetary boundary layer model to demonstrate the robustness of this approach. Both low‐resolution and high‐resolution designs are considered. Various aspects of the vegetation‐atmosphere interactions are delineated. Results obtained from the interaction‐based FF approach differ considerably from the earlier OAT‐type studies.     

Assessing land use impacts on flood processes in complex terrain by using GIS and modeling approach

A distributed hydrologic modeling and GIS approach is applied for the assessment of land use impact in the Steinsel sub-basin, Alzette, Grand-Duchy of Luxembourg. The assessment focuses on the runoff contributions from different land use classes and the potential impact of land use changes on runoff generation. The results show that the direct runoff from urban areas is dominant for a flood event compared with runoff from other land use areas in this catchment, and tends to increase for small floods and for the dry season floods, whereas the interflow from forested, pasture and agricultural field areas contributes to the recession flow. Significant variations in flood volume, peak discharge, time to the peak, etc., are found from the model simulation based on the three hypothetical land use change scenarios.     

Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.     

Quantitative structure - activity study on the reductivedehalogenation potency of the halogenated aromatics

Ｑｕａｎｔｉｔａｔｉｖｅｓｔｒｕｃｔｕｒｅ－ａｃｔｉｖｉｔｙｓｔｕｄｙｏｎｔｈｅｒｅｄｕｃｔｉｖｅｄｅｈａｌｏｇｅｎａｔｉｏｎｐｏｔｅｎｃｙｏｆｔｈｅｈａｌｏｇｅｎａｔｅｄａｒｏｍａｔｉｃｓＨｕａｎｇＱｉｎｇｇｕｏ；ＷａｎｇＬｉａｎｓｈｅｎｇ；Ｈａｎ...     

重金属对土壤—植物系统中氮的转化与NO3-淋失影响的研究

本项研究采用“微宇宙”方法,在实验室植物生长箱可控条件下,进行动态模拟实验。实验选择了七种重金属,按照土壤阳离子代换量计算出三种不同等级的土壤重金属剂量,研究它们对京津渤地区典型土壤(碳酸盐草甸土)中氮的转化与NO_3~-淋失影响。实验结果表明:七种重金属对该类土壤中氮的转化与NO_3~-淋失量有明显影响,但其表现的程度和特征有很大差异。其作用强度的次序为:Hg~(2 )>>Cd~(2 )>>Ni~(2 )>>Zn~(2 )>Pb~(2 )>Cu~(2 )>Cr~(3 )。各重金属作用的持续时间不同:Hg~(2 )、Cd~(2 )达7—11周以上,而其余重金属在4—7周。实验结论:本地区碳酸盐土壤虽然对重金属有较大的容量,但从土壤—植物系统污染生态学角度,仍可选择NO_3~-作为一项反映重金属对土壤生态毒性的早期诊断指标。     

长白山西坡风灾干扰区的恢复和保护

长白山西坡发生的灾害性风灾干扰,一方面给长白山自然保护区的森林资源造成巨大损失,同时也提出了如何加强保护和加速恢复的新课题。文中分析了风灾干扰区的更新格局和过程以及干扰后处理的有关问题,提出了从立地和景观水平促进更新恢复的保护措施     

旅游资源的环境保护对策

随着旅游和假日经济的日益升温，旅游资源的环境保护就显得更为迫切。本文基于旅游业的可持续发展要求，提出了有效保护旅游资源环境的几点对策     

水解酸化─厌氧─好氧─混凝─吸附工艺处理洁霉素生产丁提高浓度有机废水

采用水解酸化厌氧好氧混凝吸附工艺处理洁霉素生产丁提高浓度有机废水，工程实践表明，ＣＯＤＣｒ和ＢＯＤ５去除率在９９％以上，所排废水各项指标达到国家排放标准。     

绿色化学浅议

绿色化学是更高层次的化学，其产生是为了避免或减少化学过程对人类健康和环境造成的危害，由此出现的技术是环境友好的技术。绿色化学的发展能节省资源、减少环境污染，并将成为可持续发展战略的核心内容之一。     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.