Impact of long-term pesticide applications on some soil biological parameters

The soil oxidative and anaerobic processes, as well as, the microbial biomass were followed during three years in a cotton farm (Tatuí) where the recommended pesticides have been used for several years, and in an experimental field (S?o Paulo) treated first time with the same pesticides. The oxidative process was monitored by the dehydrogenase (DHA)-activity using triphenyltetrazolium chloride (TTC) as substrate. The anaerobic process was followed by the iron-oxide reduction, and the microbial biomass was estimated by the substrate (glucose)-indiced respiration. Increases in DHA-activity and in the microbial biomass occurred only in the farm soil, with concomitant decreases in iron-reduction. In the experimental field soil, the increases in DHA-activity were followed only by decreases in iron-reduction. Soil characteristics were the determining factor for different biological parameters after pesticide inputs. All the pesticides produced at least one clear but transient effect.     

A new sensitive test based on yeast cells for studying environmental pollution

Different tests based on yeast cells were developed for determination of mutagenic/carcinogenic action; however, they all showed lower sensitivity compared to bacterial tests, the main reason for this being the limited permeability of yeast cells. We found that general permeability of Saccharomyces cerevisiae cells can be increased by mutation and on this basis we developed a more sensitive test. The aim of this study was to prove the applicability of our test, called D7ts1, in environmental studies. Soil, water and air samples were taken during 1998 from regions in Bulgaria with declared low, average or high pollution levels and investigated for presence of mutagenic/carcinogenic activities in the bacterial test of Ames, the yeast D7 test of Zimmermann and our new D7ts1 test. Results obtained evidenced the following conclusions: (1) the usage of D7ts1 test instead of D7 test permits a clearer measurement of positive samples and detects mutagenic/carcinogenic activities undetectable by D7 test; (2) all samples with positive Ames test were positive in the D7ts1 test; however, some samples, clearly positive in the D7ts1, were negative in the Ames test; therefore, the simultaneous usage of D7ts1 and Ames tests in environmental studies is advantageous because it detects dangers for the human health activities to which bacterial cells do not respond; and (3) regions in Bulgaria declared clean were found to be polluted; particularly troubled are the whole-year positive data in the three tests for air samples from a 'clean' region.     

Glutamine synthetase and protease enzyme activities and growth response of ruminal bacterium Prevotella ruminicola strain B(1)4 to nitrogen source and concentration

The objective of this study was to determine the effects of varying nitrogen sources and concentrations upon glutamine synthetase and protease activities in Prevotella ruminicola strain B(1)4. Based on growth response it appears that ammonium chloride or pepticase limited P. ruminicola becomes nitrogen limited when nitrogen concentration is at 0.5 mM. However, when casein was provided as the sole source of nitrogen P. ruminicola becomes nitrogen limited at 2.5 mM. Glutamine synthetase activity was measured from mid-log phase cells grown in either nitrogen-limited or non-limited conditions. No activity was detectable in the non-limited treatments. However, in the N-limited treatments, pepticase had the highest activity (20.76 units), followed by ammonium chloride (18.72 units) and casein (14.42 units). Protease activity assays indicated that nitrogen-limited cultures had higher proteolytic activity than non-limited cultures. Moreover, these activities appeared to follow the same response pattern as the previously observed glutamine synthetase activities. The results of this study indicate that P. ruminicola strain B(1)4 protease activity may be influenced by nitrogen concentration such that activity increases when nitrogen availability decreases.     

Sorption and photolysis studies in soil and sediment of the herbicide napropamide

The influence of soil and sediment composition on sorption and photodegradation of the herbicide napropamide [N,N-diethyl-2-(1-naphthyloxy)propionamide] was investigated. Five soils and one sediment were selected for this study and the clay fractions were obtained by sedimentation. Sorption-desorption was studied by batch equilibration technique and photolysis in a photoreactor emitting within 300-450 nm wavelength with a maximum at 365 nm. Sorption increased with clay content and was not related to organic matter content. High irreversibility of sorption was related to the greater montmorillonite content. The presence of soil or sediment reduced photolysis rate due to screen effect and this process did not depend on solid composition but on particle size distribution.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Estimating separately personal exposure to ambient and nonambient particulate matter for epidemiology and risk assessment: why and how

This paper discusses the legal and scientific reasons for separating personal exposure to PM into ambient and nonambient components. It then demonstrates by several examples how well-established models and data typically obtained in exposure field studies can be used to estimate both individual and community average exposure to ambient-generated PM (ambient PM outdoors plus ambient PM that has infiltrated indoors), indoor-generated PM, and personal activity PM. Ambient concentrations are not highly correlated with personal exposure to nonambient PM or total PM but are highly correlated with personal exposure to ambient-generated PM. Therefore, ambient concentrations may be used in epidemiology as an appropriate surrogate for personal exposure to ambient-generated PM. Suggestions are offered as to how exposure to ambient-generated PM may be obtained and used in epidemiology and risk assessment.     

Matching response to context in complex political emergencies: 'relief', 'development', 'peace-building' or something in-between?

There is an ongoing debate over the value and pitfalls of the policy and practice of 'linking relief and development' or 'developmental relief' in aid responses to complex political emergencies (CPEs). Driven by concerns about relief creating dependence, sometimes doing harm and failing to address root causes of emergencies despite its high cost, pursuit of both relief and development has become a dominant paradigm among international aid agencies in CPEs as in 'natural' disasters. In CPEs a third objective of 'peace-building' has emerged, along with the logic that development can itself help prevent or resolve conflict and sustain peace. However, this broadening of relief objectives in ongoing CPEs has recently been criticised on a number of counts, central concerns being that it leads to a dilution of commitment to core humanitarian principles and is overly optimistic. This paper addresses these issues in the light of two of the CPEs studied by the COPE project: Eritrea and Somalia/Somaliland. It is argued that the debate has so far suffered from lack of clarity about what we mean by 'relief', 'development' and, for that matter, 'rehabilitation' and 'peace-building'. The wide spectrum of possible aid outcomes does not divide neatly into these categories. The relief-development divide is not always as clear-cut, technically or politically, as the critics claim. Moreover such distinctions, constructed from the point of view of aid programmers, are often of little relevance to the concerns of intended beneficiaries. Second, there has been insufficient attention to context: rather than attempting to generalise within and across CPE cases, a more productive approach would be to examine more closely the conditions under which forms of aid other than basic life support can fruitfully be pursued. This leads to consideration of collective agency capacity to respond effectively to diverse needs in different and changing circumstances.     

What happens to the state in conflict?: political analysis as a tool for planning humanitarian assistance

It is now part of received wisdom that humanitarian assistance in conflict and post-conflict situations may be ineffective or even counterproductive in the absence of an informed understanding of the broader political context in which so-called 'complex political emergencies' (CPEs) occur. Though recognising that specific cases have to be understood in their own terms, this article offers a framework for incorporating political analysis in policy design. It is based on a programme of research on a number of countries in Africa and Asia over the last four years. It argues that the starting-point should be an analysis of crises of authority within contemporary nation-states which convert conflict (a feature of all political systems) into violent conflict; of how such conflict may in turn generate more problems for, or even destroy, the state; of the deep-rooted political, institutional and developmental legacies of political violence; and of the difficulties that complicate the restoration of legitimate and effective systems of governance after the 'termination' of conflict. It then lists a series of questions which such an analysis would need to ask--less in order to provide a comprehensive check-list than to uncover underlying political processes and links. It is hoped these may be used not only to understand the political dynamics of emergencies, but also to identify what kinds of policy action should and should not be given priority by practitioners.     

Ethoxylated Soybean Polyols for Polyurethanes

Soybean polyols prepared by ring opening reactions of epoxidized soybean oil with hydrogen active compounds (water, alcohols, organic or inorganic acids, thiols, hydrogen etc.) have a low reactivity in the reaction with isocyanates because the hydroxyl groups are secondary. This paper presents a simple and convenient method to increase the reactivity of soybean polyols with secondary hydroxyl groups by ethoxylation reactions with the preservation of triglyceride ester bonds. The method uses mild reaction conditions: low alkoxylation temperature of 35–45 °C, low pressure of 0.1–0.2 MPa (15–30 p.s.i.) and a superacid as catalyst (HBF₄). The new soybean polyols have a higher reactivity toward isocyanates in polyurethane formation due to the high percentage of primary hydroxyl groups. The primary hydroxyl content was determined by the second order kinetics of polyol reaction with phenyl isocyanate.     

Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review

Studies on the use of natural fibers as replacement to man-made fiber in fiber-reinforced composites have increased and opened up further industrial possibilities. Natural fibers have the advantages of low density, low cost, and biodegradability. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. In this paper, the different chemical modifications on natural fibers for use in natural fiber-reinforced composites are reviewed. Chemical treatments including alkali, silane, acetylation, benzoylation, acrylation, maleated coupling agents, isocyanates, permanganate and others are discussed. The chemical treatment of fiber aimed at improving the adhesion between the fiber surface and the polymer matrix may not only modify the fiber surface but also increase fiber strength. Water absorption of composites is reduced and their mechanical properties are improved.