Using Ion-Exchange Resins to Study Soil Response to Experimental Watershed Acidification

Ion-exchange resins (IER) offer alternative approaches to measuring ionic movement in soils that may have advantages over traditional approaches in some settings, but more information is needed to understand how IER compare with traditional methods of measurement in forested ecosystems. At the Bear Brook Watershed in Maine (BBWM), one of two paired, forested watersheds is treated bi-monthly with S and N (28.8 and 25.2kgha⁻¹yr⁻¹ of S and N, respectively). Both IER and ceramic cup tension lysimeters were used to study soil solution responses after ∼11 years of treatment. Results from both methods showed treatments resulted in the mobilization of base cations and Al, and higher SO₄—S and inorganic N in the treated watershed. Both methods indicated similar differences in results associated with forest type (hardwoods versus softwoods), a result of differences in litter quality and atmospheric aerosol interception capacity. The correlation between lysimeter and IER data for individual analytes varied greatly. Significant correlations were evident for Na (r=0.75), Al (r=0.65), Mn (r=0.61), Fe (r=0.57), Ca (r=0.49), K (r=0.41) and NO₃—N (r=0.59). No correlation was evident between IER and soil solution data for NH₄—N and Pb. Both IER and soil solution techniques suggested similar interpretations of biogeochemical behavior in the watershed.     

Comparison of 24 h averaged VOC monitoring results for residential indoor and outdoor air using Carbopack X-filled diffusive samplers and active sampling--a pilot study

Analytical results obtained by thermal desorption GC/MS for 24 h diffusive sampling of 11 volatile organic compounds (VOCs) are compared with results of time-averaged active sampling at a known constant flow rate. Air samples were collected with co-located duplicate diffusive sampling tubes and one passivated canister. A total of eight multiple-component sampling events took place at fixed positions inside and outside three private homes. Subsequently, a known amount of sample air was transferred from the canister to an adsorbent tube for analysis by thermal desorption GC/MS. Results for the 11 most prevalent compounds--Freon 11, 1,3-butadiene, benzene, toluene, tetrachloroethene, ethylbenzene, m,p-xylene, o-xylene, 4-ethyltoluene, 1,3,5-trimethylbenzene, and p-dichlorobenzene--show that the ratio of average study values (diffusive sampling to active sampling) is 0.92 with 0.70 and 1.14 extreme ratios. Absolute percent difference for duplicate samples using diffusive sampling was <10% for the four most prevalent compounds. Agreement between the two sampling approaches indicates that the prediction of approximately constant diffusive sampling rates based on previous laboratory studies is valid under the field conditions.     

Development of an extraction method for perchlorate in soils

Perchlorate originates as a contaminant in the environment from its use in solid rocket fuels and munitions. The current US EPA methods for perchlorate determination via ion chromatography using conductivity detection do not include recommendations for the extraction of perchlorate from soil. This study evaluated and identified appropriate conditions for the extraction of perchlorate from clay loam, loamy sand, and sandy soils. Based on the results of this evaluation, soils should be extracted in a dry, ground (mortar and pestle) state with Milli-Q water in a 1 ratio 1 soil ratio water ratio and diluted no more than 5-fold before analysis. When sandy soils were extracted in this manner, the calculated method detection limit was 3.5 microg kg(-1). The findings of this study have aided in the establishment of a standardized extraction method for perchlorate in soil.     

A Rapid Method for Assessing the Environmental Performance of Commercial Farms in the Pampas of Argentina

The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.     

A Simulation Study to Assess the Sensitivity of a Forest Health Monitoring Network to Outbreaks of Defoliating Insects

The sensitivity of the United States Forest Health Monitoring network to outbreaks of defoliating insects was examined by means of a simulation study. A model constructed specifically for the study was used to generate a wide variety of defoliation patterns in forested landscapes. Forest configuration was that of Minnesota, USA, as expressed by the GAP land cover classification. Combinations of model parameters were based on a Latin Hypercube sample. The relationship between the average number of plots defoliated and outbreak characteristics was then examined via multiple regression. Both theoretical and model results pointed to a strong, linear relationship between the average number of plots defoliated and outbreak size. Model results provided additional insight, suggesting a significant relationship between the average number of plots defoliated and other outbreak characteristics after outbreak size was taken into account.     

Little Egrets (Egretta Garzetta) and Trace-Metal Contamination in Wetlands of China

The rapidly developing Asian countries may face threatening environmental contamination, that however remains largely unassessed. We studied persistent trace elements in three wetlands, Poyang Lake, relatively unpolluted, and Tai Lake, and Pearl River Delta, selected as hotspots of pollution in Central China. We adopted as indicator the Little Egret, a widespread colonial waterbird, and during 1999 and 2000 we collected and analysed the same samples as for a parallel study we conducted in Pakistan, e.g. eggs, body feathers of chicks, prey spontaneously regurgitated by the chicks, and sediments at the areas most used by foraging egrets. The levels of trace-metals at our three study areas were similar, or within the range, of those found in the few other studies for East Asia, with few exceptions. The concentrations of the various elements were below the threshold that may affect the survival or reproduction of the birds, and even the highest concentrations relative to background, i.e. Se in eggs, and Hg in feathers at Pearl Delta, do not pose toxic hazards. In sediments, the levels of trace elements were lower than the critical levels assumed for contaminated soil, except for alarming high levels of As at Poyang. These results do not confirm our expectation, that Poyang was relatively uncontaminated, while Tai and Pearl were polluted. Although trace metal concentration differed significantly among the three study areas, these differences were minor and were not consistent among elements and samples. The bioaccumulation ratios from sediments through prey, feather and egg, were consistent with our previous findings for Pakistan. Only Hg exhibited high bioaccumulation, while Se and Zn had low accumulation, and the other elements no accumulation. This reasserts that feathers of predators such as egrets, may be more sensitive indicators of environmental contamination for the elements subject to bioaccumulation, whereas the sediments or the organisms low in the food chain are better indicators for the other elements.     

Nutrient pathways and their susceptibility to past and future change in the Eurasian Arctic Ocean

Climate change is altering nutrient cycling within the Arctic Ocean, having knock-on effects to Arctic ecosystems. Primary production in the Arctic is principally nitrogen-limited, particularly in the western Pacific-dominated regions where denitrification exacerbates nitrogen loss. The nutrient status of the eastern Eurasian Arctic remains under debate. In the Barents Sea, primary production has increased by 88% since 1998. To support this rapid increase in productivity, either the standing stock of nutrients has been depleted, or the external nutrient supply has increased. Atlantic water inflow, enhanced mixing, benthic nitrogen cycling, and land–ocean interaction have the potential to alter the nutrient supply through addition, dilution or removal. Here we use new datasets from the Changing Arctic Ocean program alongside historical datasets to assess how nitrate and phosphate concentrations may be changing in response to these processes. We highlight how nutrient dynamics may continue to change, why this is important for regional and international policy-making and suggest relevant research priorities for the future.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01673-0.     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

Factors affecting TCLP lead leachability from computer CPUs

The factors impacting lead leachability from computer central processing units (CPUs) during the toxicity characteristic leaching procedure (TCLP) were investigated. Several CPUs were disassembled and their component materials were decreased in size to meet the requirements of the TCLP. The impact of CPU composition was examined by leaching different combinations of the CPU components. The ferrous metal content of the mixture greatly impacted lead leaching. TCLP lead concentrations of CPUs predicted by leaching the lead-bearing printed wire boards alone were much greater than those measured when the ferrous metal of the CPU was included in the mixture. The leaching of iron and zinc from the galvanized steel components of the CPU created electrochemical conditions where lead was less soluble. Additional size reduction beyond that required by the TCLP did not result in additional lead leaching. As the volume of head space above the leaching solution increased, the concentration of lead measured increased as well.     

Effect of temperature and organic nutrients on the biodegradation of linear alkylbenzene sulfonate (LAS) during the composting of anaerobically digested sludge from a wastewater treatment plant

Limits on the application of biosolids (anaerobically processed sludges from wastewater treatment plants) as fertilizers for the amendment of soil are becoming greater because of the accumulation of recalcitrant substances, making necessary the use of techniques that bring the concentration of xenobiotics to lower concentrations than those permitted. In general, the biosolids composting process is sufficient to reduce the usual concentration of linear alkylbenzene sulfonates (LAS) to low levels. In this work, an assessment is made on the effect of temperature in the capacity of enriched bacterial populations to biodegrade LAS, together with the influence that the available nutrients may have in the biodegradation of these compounds. The results show that the microbial metabolism of LAS was not observed in the thermophilic range. The optimum temperature for the biodegradation of LAS appears to be around 40 degrees C, this is, the lowest assayed here, and at this temperature the differences in the biodegradation of LAS among the nutritionally supplemented cultures are small.