某钢厂热源厂房通风改造

厂房的热环境好坏直接影响着工人的身体健康和生产效率。通过对某钢铁厂二高线车间厂房热环境的调查分析表明：对于自然通风的厂房来说,厂房商度一定时,加大进、排风口的高差,合理设计进风口、排风口,降低中和面的高度,能增加通风排热,降低厂房内的平均温度;同时,在厂房内合理布置设备、生产平台等通风障碍物,保证室内气流组织的合理分布,对改善作业区的热环境非常有利;高温环境下,保证一定的风流速度能提高作业工人的热舒适感。     

Characteristic and correlation analysis of influent and energy consumption of wastewater treatment plants in Taihu Basin

Poor biodegradability and insufficient carbon source are discovered from influent. Influent indices presented positively normal distribution or skewed distribution. Average energy consumption of WWTPs in Taihu Basin was as high as 0.458 kWh/m³. Energy consumption increases with the increase in influent volume and COD reduction. The total energy consumption decreases with the NH₃-N reduction. The water quality and energy consumption of wastewater treatment plants (WWTPs) in Taihu Basin were evaluated on the basis of the operation data from 204 municipal WWTPs in the basin by using various statistical methods. The influent ammonia nitrogen (NH₃-N) and total nitrogen (TN) of WWTPs in Taihu Basin showed normal distribution, whereas chemical oxygen demand (COD), biochemical oxygen demand (BOD₅), suspended solid (SS), and total phosphorus (TP) showed positively skewed distribution. The influent BOD₅/COD was 0.4%–0.6%, only 39.2% SS/BOD₅ exceeded the standard by 36.3%, the average BOD₅/TN was 3.82, and the probability of influent BOD₅/TP>20 was 82.8%. The average energy consumption of WWTPs in Taihu Basin in 2017 was 0.458 kWh/m³. The specific energy consumption of WWTPs with a daily treatment capacity of more than 5 × 10⁴ m³ in Taihu Basin was stable at 0.33 kWh/m³. A power function relationship was observed between the reduction in COD and NH₃-N and the specific energy consumption of pollutant reduction, and the higher the pollutant reduction is, the lower the specific energy consumption of pollutant reduction presents. In addition, a linear relationship existed between the energy consumption of WWTPs and the specific energy consumption of influent volume and pollutant reduction. Therefore, upgrading and operation with less energy consumption of WWTPs is imperative and the suggestions for Taihu WWTPs based on stringent discharge standard are proposed in detail.     

基于代谢组学技术分析磷酸三苯酯诱导斑马鱼胚胎发育毒性的分子机制

磷酸三苯酯(TPhP)是广泛存在于环境介质和生物体内的一种典型有机磷阻燃剂。为探求TPhP诱发水生动物发育毒性的分子机制,本研究以斑马鱼为模式动物,将发育至2.5 hpf (hours post fertilization)的斑马鱼胚胎暴露于0.0025、0.1、1、10、100和1 000μg·L~(-1)TPhP溶液至7 dpf (days post fertilization),考察斑马鱼胚胎生长发育指标和线粒体功能的变化,通过代谢组学分析揭示相关分子机制。结果表明,环境相关浓度(0.0025、0.1和1μg·L~(-1)) TPhP对斑马鱼胚胎发育无显著影响,但是轻微干扰了斑马鱼的代谢过程。100和1 000μg·L~(-1)TPhP暴露引起斑马鱼心跳速率、孵化率和线粒体膜电位明显下调,畸形率分别增加6.8倍和12.5倍,死亡率分别增加7.2倍和16.5倍。代谢组学分析发现,10、100和1 000μg·L~(-1)TPhP显著抑制斑马鱼氨基酸代谢,降低缬氨酸、亮氨酸和异亮氨酸水平,抑制氨酰-tRNA生物合成过程;同时引起葡萄糖糖酵解过程和三羧酸循环发生障碍。氨基酸和糖代谢异常可能是TPhP引起斑马鱼发育畸形的主要原因,线粒体功能紊乱可能是TPhP诱发三羧酸循环障碍的原因。上述研究结果为TPhP发育毒性机制分析提供了新思路。     

Electro-catalytic activity of CeOx modified graphite felt for carbamazepine degradation via E-peroxone process

•CeO_x/GF-EP process had the better degradation efficiency than GF-EP process. •CeO_x/GF-EP process had the flexible application in the pH range from 5.0 to 9.0. •CeO_x could enhance surface hydrophilicity and reduce the charge-transfer resistance. •The interfacial electron transfer process was revealed. E-peroxone (EP) was one of the most attractive AOPs for removing refractory organic compounds from water, but the high energy consumption for in situ generating H₂O₂ and its low reaction efficiency for activating O₃ under acidic conditions made the obstacles for its practical application. In this study, cerium oxide was loaded on the surface of graphite felt (GF) by the hydrothermal method to construct the efficient electrode (CeO_x/GF) for mineralizing carbamazepine (CBZ) via EP process. CeO_x/GF was an efficient cathode, which led to 69.4% TOC removal in CeO_x/GF-EP process with current intensity of 10 mA in 60 min. Moreover, CeO_x/GF had the flexible application in the pH range from 5.0 to 9.0, TOC removal had no obvious decline with decrease of pH. Comparative characterizations showed that CeO_x could enhance surface hydrophilicity and reduce the charge-transfer resistance of GF. About 5.4 mg/L H₂O₂ generated in CeO_x/GF-EP process, which was 2.1 times as that in GF-EP process. The greater ozone utility was also found in CeO_x/GF-EP process. More O₃ was activated into hydroxyl radicals, which accounted for the mineralization of CBZ. An interfacial electron transfer process was revealed, which involved the function of oxygen vacancies and Ce³⁺/Ce⁴⁺ redox cycle. CeO_x/GF had the good recycling property in fifth times’ use.     

石化生产装置挥发性有机化合物的泄漏检测

阐述了石化生产装置挥发性有机化合物泄漏检测工作的主要环节,介绍了主要的泄漏检测对象和检测部位,以及对检测人员的要求,给出了从检测仪器的检定和核查、响应因子、检测方法、背景干扰、数据记录等方面确保检测质量的方法.     

序批式反应器处理精对苯二甲酸废水

采用序批式反应器（SBR）处理模拟精对苯二甲酸（PTA）废水,考察了曝气量、沉降时间、进水方式等对对苯二甲酸（TA）生物降解效果的影响。实验结果表明,对于TA质量浓度小于1500mg／L的废水,采用完全曝气SBR运行4h,TA和COD的去除率均能达到95％以上,TA平均去除速率随TA浓度的增加而增大。TA质量浓度为1500mg／L时,曝气量、沉降时间和进水方式是影响其降解效果的主要因素。采用SBR处理高浓度PTA废水可克服污泥膨胀和抗冲击负荷能力弱的问题,且系统的稳定性和PTA废水的处理效果较好。     

医疗废弃物焚烧挥发性氯含量与热值测试与估算

通过测定上海某医疗废弃物处置公司设定燃烧工况条件下某时间段内烟气中HC l的平均排放速率,估算出上海地区医疗垃圾废物中的可燃烧转化氯含量在2.33%~2.64%左右;通过测定各较小采样时间段(2 m in)的烟气HC l浓度测定发现批次进料造成烟气中HC l浓度近4倍的波动,通过初步的热平衡估算得到医疗废弃物的热值大致在21.8 M J/kg,得到的结果可为我国医疗废弃物的焚烧工艺设计提供基础依据。     

不同状态下的同一污泥胞外聚合物提取方法研究

以由厌氧污泥向好氧污泥转变前后2种不同状态下的污泥为研究对象,采用5种不同方法对污泥胞外聚合物(EPS)进行了提取实验。实验结果表明,NaOH法提取的EPS含量最高,但会导致胞内物质泄漏。CER和离心提取法较温和,但EPS产量不高。甲醛-NaOH和H2SO4法提取的EPS含量较高,且无大量细胞自溶发生,是有效的EPS提取方法。厌氧污泥转变为好氧污泥后蛋白质/多糖(PN/PS)比例有所增加,表明EPS各组分含量发生改变。红外分析表明厌氧污泥转变为好氧污泥前后EPS中主要组成成分没有发生改变,但各成分含量有所增加,特征明显的峰表明EPS中存在蛋白质、多聚糖。     

MBR—NF处理印染废水

采用MBR—纳滤(MBR—NF)组合工艺处理印染废水。运行结果表明:MBR出水的COD、ρ(NH3-N)和TN分别为94,0.93,8.88mg/L,COD、NH3-N和TN的平均去除率分别为87%、95.8%和70.2%,出水水质满足GB4287—92《纺织染整工业水污染物排放标准》中的一级标准;再经NF处理后出水COD、色度、ρ(总Fe)、ρ(总Mn)和pH分别为11～30mg/L、2.3～7.4倍、0.065～0.095mg/L、0mg/L和8.06～8.21,水质可满足印染工艺回用要求。     

火电厂烟气在线监测系统存在的主要问题及进一步加强在线监测工作的建议

火电厂燃煤过程排放的污染物是我国大气污染的主要来源之一,烟气排放连续监测系统(CEMS)是实现烟气排放连续监测有效的现代化仪器设备。介绍了目前我国火电厂烟气的CEMS主要存在的问题,并针对这些存在的问题提出了相应的解决方案。