磁性Fe_3O_4/石墨烯纳米复合材料催化降解水中17β-雌二醇

利用化学沉淀法制备磁性四氧化三铁/石墨烯(Fe3O4/GE)纳米复合材料,并将其与H2O2构成非均相Fenton体系用于催化降解水中微量的17β-雌二醇(E2),研究了初始p H值,初始H2O2浓度,催化剂用量对E2降解的影响。结果表明,Fe3O4/GE纳米复合材料在无需外加光源的条件下能够有效催化降解E2。在p H 7.0,E2初始浓度为1 mg/L,初始H2O2浓度为15 mmol/L,Fe3O4/GE投加量为15 mg/L的条件下,反应8 h后可去除92.9%的E2。Fe3O4/GE具有便捷的磁分离特性和稳定的催化活性,经过7次循环使用后对E2的降解效率仍保持在91.5%左右。     

4种营养元素对水华鱼腥藻和四尾栅藻增殖的影响

以水华鱼腥藻和四尾栅藻分别作为蓝藻,绿藻代表藻种,采用均匀设计实验方法(uniform design experimentation,UDE)设计藻类AGP实验。采用通径分析法(Path Analysis,PA)对氮、磷、铁和锰在不同藻种增殖过程中的影响程度进行分析。结果表明,4种营养元素对水华鱼腥藻增殖影响的决策排序为FeTNTPMn,微量金属元素铁是影响水华鱼腥藻(蓝藻)增殖的主要因素;对四尾栅藻增殖影响的决策排序为TNTPFeMn,常量元素是影响四尾栅藻(绿藻)增殖的主要因素。联合通径分析法和逐步二次方回归分析法(QRA)建立的数学模型,可用于预判藻增殖。     

碱熔融—微波晶化法合成粉煤灰沸石及其对Cd2+的吸附

以粉煤灰为主要原料,采用碱熔融—微波晶化法合成粉煤灰沸石。采用XRD,SEM,TEM等技术表征了粉煤灰沸石的微观结构,并对其吸附Cd²⁺的性能进行了研究。表征结果显示,粉煤灰沸石主要由X型沸石、P型沸石和铝组成,粉煤灰沸石中有排列规则、呈蜂窝状的孔穴和孔道存在,其孔穴和孔道大小分布均匀,致密。粉煤灰沸石的比表面积为108.49 m²/g,平均孔径为3.779 nm,孔体积为0.221 mL/g。实验结果表明,在溶液pH为7、吸附时间30 min的最佳吸附条件下,Cd²⁺去除率均大于94%。粉煤灰沸石对Cd²⁺的吸附可很好地用二级动力学方程进行拟合,相关系数为0.999 99。可用Langmuir等温吸附模型描述该吸附过程,该吸附过程是单分子层吸附,主要是化学吸附,粉煤灰沸石对Cd²⁺的饱和吸附量为49.261 mg/g。     

能源回弹效应的研究进展及其政策涵义

“十二五”期间节能减排的目标是单位GDP能耗下降16％,为实现这一目标,政府采取了以提高能源效率为核心的节能减排政策,但是能源效率的提高可能产生潜在的“回弹效应”,即可能增加能源的使用从而使得节能减排目标难以实现.本文在文献研究的基础上,分析了回弹效应的类型和产生机理,梳理了国内外文献中关于回弹效应测度的实证结果,指出了当前实证研究中存在的主要问题,并从公共政策制定的角度设计了经济模型和其他社会科学相结合的定性比较分析研究方案,主张从经济主体行为反应、替代品价格、能源补贴以及发展新能源政策等多重视角研究回弹效应发生的内在机理,从而对能源政策产生明确的导向.最后,提出了加强能源回弹效应研究的具体政策建议.     

The Factor Decomposition on Carbon Emission of China——Based on LMDI Decomposition Technology

Carbon emission is the current hot issue of global concern. How to assess various contributing factors for carbon emission is of great importance to find out the key factors and promote carbon emission reduction. In this paper, the author constructs an identical equation for carbon emission, based on the economic aggregate, the economic structure, the efficiency of energy utilization, the structure of energy consumption, and the coefficient of carbon emission; by applying to LMDI decomposition technology, the author analyzes the carbon emission of China from 1995 to 2007 at industrial level and regional level. The results show that the expansion of economic aggregate is the main reason for China’ s rapidly increasing carbon emission and the increase of energy utilization efficiency is the key factor that can hold back the increase of carbon emission. In addition, the change of industrial structure or regional structure and the change of traditional energy structure have limited influence on the carbon emission, and their potentials have not yet been exploited. At the end of this paper, the author proposes the efforts that China should make to reduce carbon emission.     

Investigation of PM2.5 pollution during COVID-19 pandemic in Guangzhou, China

The COVID-19 pandemic has raised awareness about various environmental issues,including PM_2.5 pollution.Here,PM_2.5 pollution during the COVID-19 lockdown was traced and analyzed to clarify the sources and factors influencing PM_2.5 in Guangzhou,with an emphasis on heavy pollution.The lockdown led to large reductions in industrial and traffic emissions,which significantly reduced PM_2.5 concentrations in Guangzhou.Interestingly,the trend of PM_2.5     

历史上的灾难年2007

2007年是历史上的灾难年。由于受全球气候变暖影响,我国多个省市发生了各种自然灾害,如干旱、洪水、泥石流、滑坡、飓风等,尤其是洪涝灾害,经济损失惨重。另有朝鲜、缅甸以及南亚的印度、孟加拉国、尼泊尔也成了一片泽国;就连美国也未幸免于洪灾。现简述如下。     

A review of mechanochemistry applications in waste management

Mechanochemistry is defined to describe the chemical and physicochemical transformation of substances during the aggregation caused by the mechanical energy. Mechanochemical technology has several advantages, such as simple process, ecological safety and the possibility of obtaining a product in the metastable state. It potentially has a prospective application in pollution remediation and waste management. Therefore, this paper aims to give an overall review of the mechanochemistry applications in waste management and the related mechanisms. Based on our study, the modification of fly ash and asbestos-containing wastes (ACWs) can be achieved by mechanochemical technology. Waste metal oxides can be transformed into easily recyclable sulfide by mechanochemical sulfidization. Besides, the waste plastics and rubbers, which are usually very difficult to be recycled, can also be recycled by mechanochemical technology.     

Determination of organochlorine and organophosphate pesticide residues in fruits,vegetables and sediments

Abstract

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean‐up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean‐up for sediment extract was carried out on a10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL.

The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'‐DDT and endosulfan sulphate, which was 0.01 mg/kg.

The detection limit for oganochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 μg/kg and for organophosphate pesticides less than 10 μg/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Crystallization and Mechanical Properties of Recycled Poly(ethylene terephthalate) Toughened by Styrene–Ethylene/Butylenes–Styrene Elastomer

Recycled poly(ethylene terephthalate) (R-PET) was blended with 15–30 wt% of styrene–ethylene/butylenes–styrene (SEBS) block copolymer and maleic anhydride grafted SEBS (SEBS-g-MA). Effects of nucleation and toughening of the elastomers were evaluated systematically by study of morphology, crystallization, thermal and mechanical properties of the blend. The addition of 30 wt% SEBS promoted the formation of co-continuous structure of the blend and caused the fracture mechanism to change from strain softening to strain hardening. Addition of SEBS-g-MA resulted in significant modification of phase morphology and obviously improved the impact strength. The compatibilization reaction of PET with SEBS-g-MA accelerated the crystallization of PET and increased the crystallinity. The shifts in glass transition temperature of PET towards that of SEBS-g-MA and the higher modulus for R-PET/SEBS-g-MA (70/30) blend found by DMA are also indications of better interactions under the conditions of compatibilization and interpenetrating structure.