Ignition of dust-air atmospheres by ultrasonic waves

This paper shows the results of our investigations on the ignition source ultrasound in dust-air atmospheres. Ultrasound is, on the one hand, considered to be an ignition source according to international safety standards (EN 1127–1 (2011)). On the other hand, though, ultrasound is used for various applications in gases and air, such as level and flow measurement, or in the process industry, but no explosion accidents have yet been reported. Our research now shows that it is indeed possible to ignite dust-air mixtures in ultrasound fields under certain conditions. We conducted our experiments in an ultrasound standing wave field and used maize starch, calcium stearate and sulfur dust. For ignitions, an absorbing target was needed to convert the acoustic energy into heat. From theoretical estimations and experiments critical conditions that provoke ultrasonically triggered explosions are identified.     

Uncertainty modelling in multi-criteria analysis of water safety measures

Water utilities must assess risks and make decisions on safety measures in order to obtain a safe and sustainable drinking water supply. The World Health Organization emphasises preparation of water safety plans, in which risk ranking by means of risk matrices with discretised probability and consequence scales is commonly used. Risk ranking enables prioritisation of risks, but there is currently no common and structured way of performing uncertainty analysis and using risk ranking for evaluating and comparing water safety measures. To enable a proper prioritisation of safety measures and an efficient use of available resources for risk reduction, two alternative models linking risk ranking and multi-criteria decision analysis (MCDA) are presented and evaluated. The two models specifically enable uncertainty modelling in MCDA, and they differ in terms of how uncertainties in risk levels are considered. The need of formal handling of risk and uncertainty in MCDA is emphasised in the literature, and the suggested models provide innovations that are not dependent on the application domain. In the case study application presented here, possible safety measures are evaluated based on the benefit of estimated risk reduction, the cost of implementation and the probability of not achieving an acceptable risk level. Additional criteria such as environmental impact and consumer trust may also be included when applying the models. The case study shows how safety measures can be ranked based on preference scores or cost-effectiveness and how measures not reducing the risk enough can be identified and disqualified. Furthermore, the probability of each safety measure being ranked highest can be calculated. The two models provide a stepwise procedure for prioritising safety measures and enable a formalised handling of uncertainties in input data and results.     

The importance of experience in the interpretation of conspecific chemical signals

Foraging bumblebees scent mark flowers with hydrocarbon secretions. Several studies have found these scent marks act as a repellent to bee foragers. This was thought to minimize the risk of visiting recently depleted flowers. Some studies, however, have found a reverse, attractive effect of scent marks left on flowers. Do bees mark flowers with different scents, or could the same scent be interpreted differently depending on the bees’ previous experience with reward levels in flowers? We use a simple experimental design to investigate if the scent marks can become attractive when bees forage on artificial flowers that remain rewarding upon the bees’ return after having depleted them. We contrast this with bees trained in the more natural scenario where revisits to recently emptied flowers are unrewarding. The bees’ association between scent mark and reward value was tested with flowers scent marked from the same source. We find that the bees’ experience with the level of reward determines how the scent mark is interpreted: the same scent can act as both an attractant and a repellent. How experience and learning influence the interpretation of the meaning of chemical signals deposited by animals for communication has rarely been investigated.     

The evaluation of an analytical method for polychlorinated terpenes (PCC) in biological samples using an internal standard

The quantitative analysis of PCC (Toxaphene) residues in biological samples using gas chromatography with electron capture detection has been evaluated. Dechlorane 603, a chloroalicyclic compound is used as internal standard and modifications of the injection system for proper evaporation of this high-boiling compound is described. In the cleanup procedure PCB (and 1 – 3 % of the PCC) are removed by adsorption chromatography. Chlordane components and DDT compounds remaining in the PCC fraction constitute 5 – 10 % and 13 – 16 %, respectively, of the peak area in the chromatograms of the samples investigated. The quantitative results are influenced by the number of PCC-peaks chosen for the calculations and have to be specified together with the PCC-levels reported. The recoveries of PCC from spiked samples (20 ug PCC per gram crude fat above “natural” level) are 61 – 98 %, the lower figures obtained with samples containing low levels of PCC-residues. The practical limit of detection is about 10 ng PCC per g extracted fat.     

Characterisation, dissemination and persistence of gentamicin resistant Escherichia coli from a Danish university hospital to the waste water environment

The aim of the study was to investigate the potential spread of gentamicin resistant (GEN(R)) Escherichia coli isolates or GEN(R) determinants from a Danish university hospital to the waste water environment. Waste water samples were collected monthly from the outlets of the hospital bed wards and the inlet of the related waste water treatment plant (WWTP) from October 2002 to August 2003. Waste water samples were also collected monthly from a residential area in the same period to be able to compare the prevalence of GEN(R)E. coli isolates from hospital related and residential waste water. The waste water isolates were compared to GEN(R)E. coli isolates obtained consecutively from September 2002 to September 2003 from patients mainly with urinary tract infections at the hospital with respect to Pulsed Field Gel Electrophoresis (PFGE) profiles. All isolates were investigated for GEN(R) mechanisms (aac(3)-II, aac(3)-IV, ant(2')-I, armA), phenotypic resistance pattern, and virulence genes (hlyA, chuA, sfaS, fogG, malX, traT, iutA, fyuA, iroN, cnf1) to investigate if the hospital and waste water could be reservoirs of antimicrobial resistance and virulence. The ability for GEN(R) determinants to transfer horizontally was investigated by mating experiments. A total of 38, 15, 21, and two GEN(R)E. coli were isolated from patients, the hospital outlets, the inlet of the WWTP, and the residential area, respectively. GEN(R)E. coli were more prevalent in waste water from the hospital and the WWTP than in waste water from the residential area. PFGE profiling revealed no spread of specific patient isolates to the waste water. The aac(3)-II gene was detected both in patient and waste water isolates. Furthermore horizontal transfer of the aac(3)-II gene of patient origin to a recipient was shown in vitro, indicating a potential spread of the gene from patient isolates to waste water isolates. Regardless of origin, most isolates exhibited multi-resistance and contained several virulence genes. In conclusion, our study showed a possible spread of aac(3)-II from the hospital to the waste water. Most of the GEN(R)E. coli isolates from both patients and waste water had a multi-resistant phenotype and contained virulence genes and should therefore be considered reservoirs of antimicrobial resistance and virulence genes.     

Magnetoreception in birds: no intensity window in “fixed direction” responses

Under 502 nm turquoise light combined with 590 nm yellow light and in total darkness, European robins, Erithacus rubecula, no longer prefer their migratory direction, but exhibit so-called fixed direction responses that do not show the seasonal change between spring and autumn. We tested robins under these light conditions in the local geomagnetic field of 46 μT, a field of twice this intensity, 92 μT, and a field of three times this intensity, 138 μT. Under all three magnetic conditions, the birds preferred the same easterly direction under turquoise-and-yellow light and the same northwesterly direction under dark, while they were oriented in their seasonally appropriate direction under control conditions. “Fixed direction” responses are thus not limited to a narrow intensity window as has been found for normal compass orientation. This can be attributed to their origin in the magnetite-based receptor in the upper beak, which operates according to fundamentally different principles than the radical pair mechanism in the retina mediating compass orientation. “Fixed direction” responses are possibly a relict of a receptor mechanism that changed its function, now mainly providing information on magnetic intensity.     

The determination of partition coefficients of organic compounds in technical products and waste waters for the estimation of their bioaccumulation potential using reversed phase thin layer chromatography

Reversed phase thin layer chromatography (RPTLC) has been investigated for the estimation of octanol/water partition coefficients (P), an important parameter for the prediction of the environmental behaviour of organic chemicals. A strong correlation between P derived from the traditional octanol/water system and RPTLC has been established over five orders of magnitude. RPTLC data are likewise correlated to results obtained by high performance chromatography (HPLC). Due to the low costs, simplicity and separation power RPTLC is especially suited for the investigation and screening of mixtures of compounds before more complicated tests are involved.

Results from a round robin test on the determination of partition coefficients by HPLC, RPTLC and the batch method indicate the simplicity and accuracy of the RPTLC technique. Applications of the RPTLC‐technique on technical products and industrial waste waters are described.     

Chaos and complexity in development

SUMMARY

The paper outlines some main features of chaos theory. Examples of chaotic systems in society and the environment are given. Spontaneous interaction of components, without being planned or directed, is known as ‘self-organising behaviour’. Chaos is an essential aspect of this self organisation, occurring in many forms. A chaotic system is defined as one that shows sensitivity to initial conditions. If the errors relative to the initial conditions become too great, the system will eventually collapse. Development projects are sensitive to such initial conditions. In particular, two examples in development are outlined in some detail and commented upon. One is the occurrence of a project promoting self-organising systems among the poorest of the poor. The other outlines how rehabilitation after resettlement in a power project has transgressed the ‘edge of chaos’ socio-emotionally, in spite of the socioeconomic development being good.     

Generic framework for meso-scale assessment of climate change hazards in coastal environments

This paper presents a generic framework for assessing inherent climate change hazards in coastal environments through a combined coastal classification and hazard evaluation system. The framework is developed to be used at scales relevant for regional and national planning and aims to cover all coastal environments worldwide through a specially designed coastal classification system containing 113 generic coastal types. The framework provides information on the degree to which key climate change hazards are inherent in a particular coastal environment, and covers the hazards of ecosystem disruption, gradual inundation, salt water intrusion, erosion and flooding. The system includes a total of 565 individual hazard evaluations, each graduated into four different hazard levels based on a scientific literature review. The framework uses a simple assessment methodology with limited data and computing requirements, allowing for application in developing country settings. It is presented as a graphical tool—the Coastal Hazard Wheel—to ease its application for planning purposes.