Quality control of waste to incineration--waste composition analysis in Lidk?ping, Sweden.

In order to decrease environmental impacts in waste management the choice of treatment method must be based on the characteristics of the waste. Present sampling procedures do not provide statistically representative samples of solid waste and this provides difficulties in characterization. The objective of this study was to develop a procedure for waste component analysis and sampling of waste after collection and at plant level. A further objective was to characterize the waste delivered to an incineration plant for physical and chemical properties and to determine the amounts of delivered waste that could be classified as biofuels and fossil fuels. The proportions of recyclables and hazardous waste were also examined. Samples were taken randomly from waste trucks and divided by square implementation. Statistical analysis of the results showed that the number of sub-samples could be decreased with only a moderate increase in the confidence interval. This means that future waste composition analyses could be made more efficient and thereby less expensive. The analysis of the waste delivered to the Lidk?ping incineration plant (Central Sweden) showed that 66.4% of the household waste was composed of biofuels and 21.3% of non-renewable combustibles, of which 40.3% were recyclables. In addition, 11.6% of the household waste was non-combustible and 0.6% hazardous waste. The heat value for the biofuels was 18.0-19.7 MJ kg(-1) dry mass (DM) and for the fossil fuels 28.2-33.9 MJ kg(-1) DM. The industrial waste consisted of 35.9% biofuels, 62.0% fossil fuels, 1.6% non-combustible and 0.5% hazardous waste. The heat value was 19.5 MJ kg(-1) DM for the biofuels and 31.4 MJ kg(-1) DM for the fossil fuels.     

Revealing Preferences for Reductions of Public Risks: An Application of the CV Approach

In this paper the contingent valuation method (CVM) is applied to public risk reduction. Theory suggests that the size of the stated willingness to pay (WTP) for risk reduction depends on private activities aimed at reducing the risk level for the individual. The empirical results suggest that considering private averting activities increases the explanatory power of the estimated WTP function significantly. Thus, WTP passes the scope test which proposes that larger reductions from a larger baseline risk should be valued higher than lower risk reductions from a lower baseline risk. Furthermore, we demonstrate that the follow-up response format induces anchoring effects.     

Feeding rates of the jellyfish Aurelia aurita on fish larvae

We quantified feeding rates of field caught Aurelia aurita feeding on yolk sac cod (Gadus morhua) larvae in a series of incubation experiments. A short-time (~1 h) functional response experiment with a wide range of prey concentrations (0.5–16 prey l⁻¹, initial concentration) revealed that ingestion rates increased linearly over this range, such that clearance rates were similar between the different prey concentrations. This suggests that A. aurita is capable of efficiently utilizing dense prey patches. This indication was further supported by a linear increase of prey captured by A. aurita during 2.5 h of feeding at extremely high prey concentration (>200 prey l⁻¹). Clearance rate in darkness scaled with jellyfish diameter to a power of ~1.7 for jellyfish 3.9–9.5 cm in diameter. The jellyfish did not alter their umbrella pulse frequency in response to presence of fish larvae. There were no significant differences between A. aurita feeding rates in light and darkness for yolk sac prey ages 0–7 days (at 7.5°C). Although prey vision and escape abilities of fish may develop rapidly during early larval ontogeny, these factors apparently have little impact on interactions with predators such as A. aurita during the yolk sac stage.     

Small enterprise owners’ accident causation attribution and prevention

Small enterprises have difficulty in the systematic prevention of accidents. This study explores how owners of small enterprises attribute accident causation and what they learn about accident prevention after an accident. Interviews were carried out with owners of 22 small (1–19 employees) construction and metal industry enterprises that recently had reported an accident with an expected injury absence of over two weeks. Data were analysed using thematic analysis. The results reveal that after a relatively serious accident the owners predominantly attribute the incident to unforeseeable circumstances, and secondarily to worker faults. A possible explanation is both self- and group-defensive attributions in order to avoid responsibility and blame. The reciprocal and close social relations between owners and workers make it difficult for the owners to be solely responsible for the accident. The study presents a paradox: learning from the accidents seems to be negative as the owners need to abstain from accident prevention in order to maintain that accidents are unforeseeable, and the injured worker returns to work under the same unsafe conditions as before the accident. The study indicates that efforts to improve accident prevention in small enterprises need to find ways to avoid defensive attribution in order to attain successful outcomes.     

Crown density assessments, control surveys and reproducibility

This study aims to evaluate the quality of crown density data, based on independent, pairwise tree assessments. The data originates from monitoring of forest health (crown condition) in Norway; 250 plots, comprising 12 000 individual trees of Norway spruce, have been reassessed by a single observer during 1990–95. Of the trees, 2300 were controlled more than twice, providing the possibility of evaluating the quality of assessed temporal changes of crown density. True errors (standard deviation) are estimated to be about 10% for single trees and 5% for plot means, while the real standard deviation of the differences were slightly higher. The errors of the temporal changes of crown density were of similar magnitude. Systematic differences in crown density were found between sites and plot types, partly resulting from observer bias. However, the results suggest that observer bias is really the result of each observer's personal style in assessment.     

Soxhlet extraction parameters’ influence on the recovery of polychlorinated dibenzo‐p‐dioxins and dibenzofurans (PCDD/F) from a sediment,and artifact formation of PCDD

Soxhlet extraction of polychlorinated dibenzo‐p‐dioxins/dibenzofurans (PCDD/F) from sediment was studied using a designed experimental set‐up. Three variables were studied: three solvent combinations n‐hexane/methanol, dichloromethane/acetone and toluene/methanol; two extraction times, 8 and 16 h, and addition of bulk substances (sodium carbonate). The extraction efficiency was almost identical in all extractions, with the exception of extraction where toluene/ methanol was combined with sodium carbonate. In these samples a major effect was observed, due to formation of Hx‐, Hp‐ and OCDD isomers. Composition of formed PCDD was similar to PCDD isomers found in pentachlorophenol products.     

Polybrominated diphenyl ether exposure to electronics recycling workers--a follow up study

Workers at an electronics recycling plant have previously been shown to have elevated serum levels of polybrominated diphenyl ethers (PBDEs) compared to referents without occupational PBDE exposure. Subsequent structural changes and industrial hygiene measures at the plant were applied to improve the work environment. The present study aims to assess the impact of these work environment changes on the occupational exposure to PBDEs.

Blood were drawn from the workers and analyzed at two different laboratories, and serum concentrations of several PBDE congeners were determined by GC/MS or GC/HRMS. Cross-sectional studies were performed prior to (in 1997; N = 19) and after (in 2000; N = 27) workplace improvements. Longitudinal studies were performed on twelve of the workers that were sampled at both occasions.

Even though the amount of processed goods had doubled in 2000 as compared to 1997, there was a significant decrease in the serum levels of BDE-183 and BDE-209. For BDE-209 the levels observed in year 2000 were even lower than in referents with no occupational exposure. In contrast to the decrease of higher brominated diphenyl ethers, the concentrations of BDE-47 did not significantly change. For BDE-153, the cross-sectional study indicated no change, whereas the longitudinal follow up indicated a significant increase.

This study shows that the industrial hygiene improvements clearly reduced the occupational exposure to BDE-183 and BDE-209 at the plant. Still, the levels of hexa- to nonaBDEs but not BDE-209 were elevated, compared to referents with no occupational exposure.     

A simplified precise method for adjusting serum levels of persistent organohalogen pollutants to total serum lipids

In order to obtain biomarker values that reflect body burden of persistent organohalogen pollutants (POP), concentrations of lipophilic POP in serum or plasma are generally expressed on a lipid weight basis, and not on a fresh weight basis. There are two different approaches to determine the lipid content in serum and plasma. The gravimetric determination is more expensive, and longer experience is needed as compared with the preferable enzymatic determination. Clinical chemistry laboratories at most hospitals perform enzymatic determinations of cholesterol and triglycerides on a routine basis, whereas analysis of phospholipids is not part of these analyses. In the present study, therefore, we evaluated the association between the sum of measured triglyceride, cholesterol, and phospholipid levels in serum among 617 individuals with the sum of only triglyceride and cholesterol levels. There was a very strong linear association between the sums of serum concentrations of triglycerides and cholesterols and the total lipid concentrations. As much as 97.2% of the variation in total lipid concentrations was explained by the sum of the triglyceride and cholesterol concentrations, with the following regression: Total lipid=0.9+1.3 *(Cholesterol+Triglycerides). Almost identical relationships were recorded in subgroups with men, women and subjects of different age. Thus, total lipid concentrations in blood serum can be accurately estimated by analyzing only cholesterol and triglycerides in the matrix.     

Biphenyl degradation kinetics by Burkholderia xenovorans LB400 in two-phase partitioning bioreactors

Biphenyl could be successfully degraded by Burkholderia xenovorans LB400, initially described as Pseudomonas sp. LB400, in two-phase partitioning bioreactors (TPPBs). TPPBs are comprised of an aqueous, cell containing phase, and an immiscible, biocompatible organic phase that partitions toxic and/or poorly soluble substrates (in this case biphenyl) based on maintaining a thermodynamic equilibrium. The critical LogKO/W of the organism was found to be approximately 5.5, indicating that solvents with a LogKO/W larger than 5.5 are suitable as delivery phases for B. xenovorans LB400. Two solvents selected for the TPPB system were octadecene and bis(2-ethylhexyl)sebacate (BES). In one experiment a total of 6.6 g biphenyl per l aqueous-phase-equivalent (biphenyl delivered in solvent, at an aqueous phase to solvent ratio of 10) could be degraded in 25 h during batch operation with octadecene. The specific growth rate and the half saturation constant of the Monod model were estimated to be mumax=0.25 h-1 and KS=0.0001 g l-1, and the yield coefficient was YX/S=0.48 g biomass per g biphenyl. These parameter estimates were used to predict the time course of biphenyl degradation at different initial substrate concentrations and with biphenyl delivered from the two solvents with different partitioning behaviour for biphenyl. The predictions were validated by experimental data, confirming the microbial kinetics as well as the expected partitioning effects.