Pharmaceuticals and other organic chemicals in selected north-central and northwestern Arkansas streams

Recently, our attention has focused on the low level detection of many antibiotics, pharmaceuticals, and other organic chemicals in water resources. The limited studies available suggest that urban or rural streams receiving wastewater effluent are more susceptible to contamination. The purpose of this study was to evaluate the occurrence of antibiotics, pharmaceuticals, and other organic chemicals at 18 sites on seven selected streams in Arkansas, USA, during March, April, and August 2004. Water samples were collected upstream and downstream from the influence of effluent discharges in northwestern Arkansas and at one site on a relatively undeveloped stream in north-central Arkansas. At least one antibiotic, pharmaceutical, or other organic chemical was detected at all sites, except at Spavinaw Creek near Mayesville, Arkansas. The greatest number of detections was observed at Mud Creek downstream from an effluent discharge, including 31 pharmaceuticals and other organic chemicals. The detection of these chemicals occurred in higher frequency at sites downstream from effluent discharges compared to those sites upstream from effluent discharges; total chemical concentration was also greater downstream. Wastewater effluent discharge increased the concentrations of detergent metabolites, fire retardants, fragrances and flavors, and steroids in these streams. Antibiotics and associated degradation products were only found at two streams downstream from effluent discharges. Overall, 42 of the 108 chemicals targeted in this study were found in water samples from at least one site, and the most frequently detected organic chemicals included caffeine, phenol, para-cresol, and acetyl hexamethyl tetrahydro naphthalene (AHTN).     

Identifying hydrologically sensitive areas: bridging the gap between science and application

Researchers have noted that current water quality protection strategies, like nutrient management plans, lack a sound hydrological underpinning for pollutant transport processes. This is especially true for areas like the northeastern U.S. where copious research has shown that variable source area hydrology largely governs runoff generation. The goal of this study was to develop a scientifically justified method to identify the locations that generate overland flow. Furthermore, this methodology must be computationally simple enough that it can be utilized or incorporated into nutrient management plans and other established water quality tools. We specifically tested the reliability of the 'distance from a stream,'D(s), and the 'topographic index,'lambda, to predict areas with a high propensity for generating overland flow, i.e. hydrologically sensitive areas (HSA). HSAs were defined by their probability of generating runoff, P(sat), based on 30 year simulations using a physically based hydrological model. Using GIS, each location's P(sat) was correlated with D(s) and lambda. We used three Delaware Co., NY watersheds in the New York City watershed system with areas varying in size from 1.6 to 37 km2 and with forested and agricultural land uses. The topographic index gave stronger, more regionally consistent correlations with P(sat) than did D(s). Equations correlating lambda and P(sat) for each month are presented and can be used to estimate hydrological sensitivity in the region surrounding our study watersheds, i.e. in Delaware Co. This work is currently being incorporated into an Internet Mapping System to facilitate user-friendly, on-line identification of HSAs.     

Efforts to Reduce Mortality to Hydroelectric Turbine-Passed Fish: Locating and Quantifying Damaging Shear Stresses

Severe fluid forces are believed to be a source of injury and mortality to fish that pass through hydroelectric turbines. A process is described by which laboratory bioassays, computational fluid dynamics models, and field studies can be integrated to evaluate the significance of fluid shear stresses that occur in a turbine. Areas containing potentially lethal shear stresses were identified near the stay vanes and wicket gates, runner, and in the draft tube of a large Kaplan turbine. However, under typical operating conditions, computational models estimated that these dangerous areas comprise less than 2% of the flow path through the modeled turbine. The predicted volumes of the damaging shear stress zones did not correlate well with observed fish mortality at a field installation of this turbine, which ranged from less than 1% to nearly 12%. Possible reasons for the poor correlation are discussed. Computational modeling is necessary to develop an understanding of the role of particular fish injury mechanisms, to compare their effects with those of other sources of injury, and to minimize the trial and error previously needed to mitigate those effects. The process we describe is being used to modify the design of hydroelectric turbines to improve fish passage survival.     

Shine a light: Under-ice light and its ecological implications in a changing Arctic Ocean

The Arctic marine ecosystem is shaped by the seasonality of the solar cycle, spanning from 24-h light at the sea surface in summer to 24-h darkness in winter. The amount of light available for under-ice ecosystems is the result of different physical and biological processes that affect its path through atmosphere, snow, sea ice and water. In this article, we review the present state of knowledge of the abiotic (clouds, sea ice, snow, suspended matter) and biotic (sea ice algae and phytoplankton) controls on the underwater light field. We focus on how the available light affects the seasonal cycle of primary production (sympagic and pelagic) and discuss the sensitivity of ecosystems to changes in the light field based on model simulations. Lastly, we discuss predicted future changes in under-ice light as a consequence of climate change and their potential ecological implications, with the aim of providing a guide for future research.     

Mapping risks associated with soil copper contamination using availability and bio-availability proxies at the European scale

Environmental Science and Pollution Research - Soil contamination by trace elements like copper (Cu) can affect soil functioning. Environmental policies with guidelines and soil survey measurements...     

Towards a Regional Index of Biological Integrity: the Example of Forested Riparian Ecosystems

Our premise is that measures of ecological indicators and habitat conditions will vary between reference standard sites and reference sites that are impacted, and that these measures can be applied consistently across a regional gradient in the form of a Regional Index of Biological Integrity (RIBI). Six principles are proposed to guide development of any RIBI: 1) biological communities with high integrity are the desired endpoints; 2) indicators can have a biological, physical, or chemical basis; 3) indicators should be tied to specific stressors that can be realistically managed; 4) linkages across geographic scales and ecosystems should be provided; 5) reference standards should be used to define target conditions; and 6) assessment protocols should be efficiently and rapidly applied. To illustrate how a RIBI might be developed, we show how four integrative bioindicators can be combined to develop a RIBI for forest riparian ecosystems in the Mid-Atlantic states: 1) macroinvertebrate communities, 2) amphibian communities, 3) avian communities, and 4) avain productivity, primarily for the Louisiana waterthrush (Seirius motacilla). By providing a reliable expression of environmental stress or change, a RIBI can help managers reach scientifically defensible decisions.     

Assessing tether anchor labeling and usability in pickup trucks

Objective: The objective of this study was to investigate vehicle factors associated with child restraint tether use and misuse in pickup trucks and evaluate 4 labeling interventions designed to educate consumers on proper tether use.

Methods: Volunteer testing was performed with 24 subjects and 4 different pickup trucks. Each subject performed 8 child restraint installations among the 4 pickups using 2 forward-facing restraints: a Britax Marathon G4.1 and an Evenflo Triumph. Vehicles were selected to represent 4 different implementations of tether anchors among pickups: plastic loop routers (Chevrolet Silverado), webbing routers (Ram), back wall anchors (Nissan Frontier), and webbing routers plus metal anchors (Toyota Tundra). Interventions included a diagram label, Quick Response (QR) Code linked to video instruction, coordinating text label, and contrasting text tag.

Results: Subjects used the child restraint tether in 93% of trials. However, tether use was completely correct in only 9% of trials. An installation was considered functional if the subject attached the tether to a tether anchor and had a tight installation (ignoring routing and head restraint position); 28% of subjects achieved a functional installation. The most common installation error was attaching the tether hook to the anchor/router directly behind the child restraint (near the top of the seatback) rather than placing the tether through the router and attaching it to the anchor in the adjacent seating position. The Nissan Frontier, with the anchor located on the back wall of the cab, had the highest rate of correct installations but also had the highest rate of attaching the tether to components other than the tether anchor (seat adjustor, child restraint storage hook, around head restraint). None of the labeling interventions had a significant effect on correct installation; not a single subject scanned the QR Code to access the video instruction. Subjects with the most successful installations spent extensive time reviewing the vehicle manuals.

Conclusion: Current implementations of tether anchors among pickup trucks are not intuitive for child restraint installations, and alternate designs should be explored. Several different labeling interventions were ineffective at achieving correct tether use in pickup trucks.     

Relationship between neuropsychological tests and driver's license renewal tests in Parkinson's disease

Objective: To determine whether the standard Spanish driving test (ASDE test) was able to identify patients with Parkinson's disease (PD) at risk of unsafe driving and to examine the relationship between the ASDE test and the Useful Field of View (UFOV) as well as with a battery of neuropsychological tests in drivers with PD.

Methods: Thirty-seven patients with PD and 33 controls matched by age and education level were included in an observational study. All participants were active drivers and patients with PD underwent study procedures after taking the medication in the “on” period. Subjects with a Mini-Mental State Examination (MMSE) score ≤ 24 were excluded. Neuropsychological tests (Repeatable Battery for Neuropsychological Status [RBANS], Trail Making Test [TMT-A and -B], and Block Design test), driving performance tests (ASDE Driver Test and UFOV), and daytime sleepiness (Epworth Sleepiness Scale) were assessed.

Results: The PD group performed significantly worse than healthy controls in the ASDE Motor Coordination tests. No significant differences were observed in anticipation speed, multiple reaction time, concentrated attention, and resistance to monotony. All participants successfully completed the UFOV tests. Statistically significant differences between patients with PD and controls were found in processing speed (UFOV1; P =.03) and more patients with PD were found in the categories of higher driving risk levels (P =.03). In addition, patients with PD showed worse scores than healthy controls in visuospatial capacities (Line Orientation), psychomotor speed (Coding and TMT-A), memory (List Recognition, Story Recall), and executive function (TMT-B). The driving tests (ASDE and UFOV) showed a low sensitivity and a high specificity but a higher percentage of patients in the PD group failed in multiple reaction time, concentrated attention, and resistance to monotony. In addition, 18.9% of patients with PD showed a cutoff of 4 for UFOV risk. In the discriminant analysis, Line Orientation (visuospatial/constructive domain) and Figure Recall (delayed memory) were found to be statistically significant with a rate of correct classification of unsafe drivers with PD of 78.2%. In addition, normal results on the Line Orientation item were associated with a 1.5 times higher probability of non-risky driving in the multivariate analysis.

Conclusions: At early stages of the disease, about 19% of patients with PD showed difficulties that may affect their driving capabilities. Line Orientation and Figure Recall are useful to alert clinicians to the risk of unsafe driving. For this reason, patients with PD should be evaluated for driving abilities more regularly to determine the extent of deficits that may influence driving performance.     

Love and work: career–family attitudes of new entrants into the labor force

This paper reports the development of the Career–Family Attitudes Measure (CFAM), a new 56-item instrument for measuring individuals' attitudes towards managing the career and family interface. The measure was administered to a large sample of high school students and factor analyzed to reveal six dimensions of career and family attitudes, which were then scaled. Females in the sample had significantly more positive attitudes towards Balance and Independence than did males, while males had significantly more positive attitudes towards Dominance and Spousal Support than did females. Antecedents such as parental employment history and educational aspirations were significantly related to several of the scales. Results indicated that career–family attitudes involve preferences for the integration of career and family rather than for trade-offs between them. Research to establish the validity and explore the many applications of the CFAM is needed. © 1998 John Wiley & Sons, Ltd.     

Effective Transboundary Aquifer Areas: An Approach for Transboundary Groundwater Management

The natural complexity, heterogeneity, and extent of transboundary aquifers around the world, have led to controversy over which method or criteria should be used to identify and delineate their boundaries. Currently, there is no standard methodology that aquifer‐sharing countries can use to delineate the area of a transboundary aquifer. In the case of Mexico and Texas, Mexico uses administrative boundaries, whereas Texas uses geological boundaries. This paper proposes a method for delineation and prioritization of aquifers (or aquifer areas) called effective transboundary aquifer areas (ETAAs), which uses a combination of physical criteria (geological boundaries, topography, and hydrography) and the location and density of active water wells in the borderland between Mexico and Texas. This method identifies the area of priority (productivity area) in the aquifer using pumping patterns or hot spots regardless of the aquifer’s surficial geological limits, therefore offering a more effective, local and practical management option at the transboundary level. Different geological features or pumping patterns will have different sizes and locations of ETAAs within the same aquifer. In West Texas, which is dominated by bolsons, the method produces limited options for ETAAs, whereas in South Texas in the easternmost border the identified ETAAs are more significant.