不同挂膜方式生物滴滤塔处理含H2S恶臭气体

采用菌剂挂膜,活性污泥挂膜和自然挂膜3种不同方式形成生物滴滤塔,考察挂膜方式对生物滴滤塔去除H2s恶臭气体的影响。结果表明,当进气H2S浓度为5mg／m3时,菌剂挂膜、活性污泥挂膜、自然挂膜形成的生物滴滤塔出气H2s浓度分别为15．7～17．4、11．6～14．8和15．0～15．9μg／m3;塔内压降分别为3—4mm水柱、6mm水柱和4—5mm水柱;喷淋后滤出液中硫酸根的浓度分别为14、22和17mg／L,硫的转化率分别为45％、60％和50％。当进气H2S浓度增大至7mg／m3时,3个塔经过7d的调整后,均能达到稳定状态,稳定后3个塔中出气H2s浓度和压降基本没变,喷淋后滤出液中硫酸根浓度依次增大至25、31和30mg／L左右。采用活性污泥挂膜形成的生物滴滤塔处理H2s的能力比菌剂挂膜和自然挂膜的高。     

Uncovering causes and effects of desertification using a Leopold matrix in Binh Thuan Province,Vietnam

Vietnam is a coastal country projected to be heavily affected by climate change.Binh Thuan Province is part of the driest region of Vietnam and is prone to desertification.An expert panel participated in developing a Leopold matrix which allowed for identification of desertification impact factors on the province's socioeconomic activities and assessment of the strength of cause-effect relationships in terms of magnitude and importance.Land use planning,surface water,and the length of the dry season are considered the most important causes,with the overall highest scores for both magnitude and importance in the cause-effect relationship.The largest effects of the different factors are perceived on water supply for agriculture and household use.Water availability and land use planning are important remedial action domains,while drought and land cover require monitoring to assess impacts.The indicators of cause and effect can be used in a longer-term general monitoring and assessment framework to combat desertification in the area.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

Effects of untreated hospital effluents on the accumulation of toxic metals in sediments of receiving system under tropical conditions: Case of South India and Democratic Republic of Congo

Physicochemical and ecotoxicological analyses have been performed to assess the quality of sediments receiving untreated hospital effluents from Indian and Democratic Republic of Congo (DRC) hospitals. The sediments were collected monthly and characterized for grain size, organic matter, total organic carbon, total carbon, nitrogen, phosphorus, toxic metals and ecotoxicity. The results highlight the high concentration of toxic metals from the Indian hospital effluent receiving systems, especially for Cr, Cu, As, Zn and Hg. On the other hand, the metal concentrations in the sediment receiving system from DRC are low (e.g. maximum Hg and Zn concentration were 0.46 and 48.84 mg kg⁻¹ respectively). Ostracods exposed to sediment samples H2 (September month sample) and H3 (June and September month samples) were found dead after 6 d of exposure whereas the higher mortality rate for Congo sediments was 23% but was accompanied with 33 ± 7% of growth inhibition. The results of this study show the variation of sediment composition on toxic metal levels as well as toxicity related to both, the type of hospitals and the sampling period. Additionally, hospital effluent disposal practices at the study sites can lead to the pollution of water resources and may generate risks for aquatic organisms and human health.     

Cadmium background concentrations to establish reference quality values for soils of São Paulo State,Brazil

Proper assessment of soil cadmium (Cd) concentrations is essential to establish legislative limits. The present study aimed to assess background Cd concentrations in soils from the state of São Paulo, Brazil, and to correlate such concentrations with several soil attributes. The topsoil samples (n?=?191) were assessed for total Cd contents and for other metals using the USEPA 3051A method. The background concentration was determined according to the third quartile (75th). Principal component analysis, Spearman correlation, and multiple regressions between Cd contents and other soil attributes (pH, cation exchange capacity (CEC), clay content, sum of bases, organic matter, and total Fe, Al, Zn, and Pb levels) were performed. The mean Cd concentration of all 191 samples was 0.4 mg kg^?1, and the background concentration was 0.5 mg kg^?1. After the samples were grouped by parent material (rock origin) and soil type, the background Cd content varied, i.e., soils from igneous, metamorphic, and sedimentary rocks harbored 1.5, 0.4, and 0.2 mg kg^?1 of Cd, respectively. The background Cd content in Oxisols (0.8 mg kg^?1) was higher than in Ultisols (0.3 mg kg^?1). Multiple regression demonstrated that Fe was primarily attributed to the natural Cd contents in the soils (R ²?=?0.79). Instead of a single Cd background concentration value representing all São Paulo soils, we propose that the concentrations should be specific for at least Oxisols and Ultisols, which are the primary soil types.     

Which Formalism to Model the pH and Temperature Dependence of the Microbiological Processes in Soils? Emphasis on Nitrification

We compared three formalisms derived from (1) medical sciences, (2) environmental, and (3) agronomic models to simulate the effects of pH and temperature on the nitrification rate in arable soils. We evaluated these formalisms by implementing them in a simple growth model by comparing modelled and measured nitrate contents of soil samples with different initial soil pH after incubation at two temperatures. We found that the formalisms derived from medical sciences were more accurate and easily adapted to the data, suggesting that such formalisms may be profitably used in agronomic or environmental models.     

Spatial distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in soils from typical oil-sewage irrigation area, Northeast China

Air pollution is one of the major environmental problems in India, affecting health of thousands of 'urban' residents residing in mega cities. The need of the day is to evolve an 'effective' and 'efficient' air quality management plan (AQMP) encompassing the essential 'key players' and 'stakeholders.' This paper describes the formulation of an AQMP for mega cities like Delhi in India taking into account the aforementioned key 'inputs.' The AQMP formulation methodology is based on past studies of Longhurst et al., (Atmospheric Environment, 30, 3975-3985, 1996); Longhurst & Elsom, ((1997). Air Pollution-II, Vol. 2 (pp. 525-532)) and Beatti et al., (Atmospheric Environment, 35, 1479-1490, 2001). Further, the vulnerability analysis (VA) has been carried out to evaluate the stresses due to air pollution in the study area. The VA has given the vulnerability index (VI) of 'medium to high' and 'low' at urban roadways/intersections and residential areas, respectively.     

A phycocyanin probe as a tool for monitoring cyanobacteria in freshwater bodies

In many countries, the presence of cyanobacteria in freshwater bodies used for both drinking water and recreational purposes is under increasing public health attention. Water managers are considering how to implement monitoring that leads to a minimization of the risks incurred by the users of potentially contaminated sites. To address this question, this study involved assessing the performance of a submersible probe for measuring phycocyanin-specific fluorescence as a function of cyanobacterial biomass, with the aim of applying it as a tool for surveillance management. Its advantages and limits compared to more traditional analyses are discussed. The monitoring of cyanobacteria in the water bodies of western France was carried out using a minifluorimeter specific to the fluorescence of phycocyanin, a pigment specific to cyanobacteria. The results are compared with the analyses recommended by the World Health Organisation (chlorophyll a and cell counting). This study based on nearly 800 samples shows a significant correlation between the phycocyanin content and the cyanobacterial biomass, expressed as the number of cells per mL (R2 = 0.73). This submersible probe is simple and rapid to use, making it possible to take into account horizontal and vertical heterogeneities in the proliferation growth. In this way, we are able to detect at an early stage the conditions that could potentially lead to a risk, in order to start sampling. Due to its sensitivity, this tool proves suitable for monitoring aimed at reducing the risks incurred by the users of contaminated sites and launching preventative actions. The use of the phycocyanin probe provides an effective tool to complement traditional analyses of cyanobacterial presence. It is suggested that a surveillance protocol based on phycocyanin concentration can significantly improved the accuracy of the extent of cyanobacterial bloom development in the light of spatial and temporal variabilities associated with these occurrences.     

Dynamic extreme values modeling and monitoring by means of sea shores water quality biomarkers and valvometry

Water quality can be evaluated using biomarkers such as tissular enzymatic activities of endemic species. Measurement of molluscs bivalves activity at high frequency (e.g., valvometry) during a long time period is another way to record the animal behavior and to evaluate perturbations of the water quality in real time. As the pollution affects the activity of oysters, we consider the valves opening and closing velocities to monitor the water quality assessment. We propose to model the huge volume of velocity data collected in the framework of valvometry using a new nonparametric extreme values statistical model. The objective is to estimate the tail probabilities and the extreme quantiles of the distribution of valve closing velocity. The tail of the distribution function of valve closing velocity is modeled by a Pareto distribution with parameter ??_t,τ, beyond a threshold τ according to the time t of the experiment. Our modeling approach reveals the dependence between the specific activity of two enzymatic biomarkers (Glutathione-S-transferase and acetylcholinesterase) and the continuous recording of oyster valve velocity, proving the suitability of this tool for water quality assessment. Thus, valvometry allows in real-time in situ analysis of the bivalves behavior and appears as an effective early warning tool in ecological risk assessment and marine environment monitoring.     

Degradation of ethylenethiourea pesticide metabolite from water by photocatalytic processes

In this study, photocatalytic (photo-Fenton and H₂O₂/UV) and dark Fenton processes were used to remove ethylenethiourea (ETU) from water. The experiments were conducted in a photo-reactor with an 80 W mercury vapor lamp. The mineralization of ETU was determined by total organic carbon analysis, and ETU degradation was qualitatively monitored by the reduction of UV absorbance at 232 nm. A higher mineralization efficiency was obtained by using the photo-peroxidation process (UV/H₂O₂). Approximately 77% of ETU was mineralized within 120 min of the reaction using [H₂O₂]₀ = 400 mg L^?1. The photo-Fenton process mineralized 70% of the ETU with [H₂O₂]₀ = 800 mg L^?1 and [Fe²⁺] = 400 mg L^?1, and there is evidence that hydrogen peroxide was the limiting reagent in the reaction because it was rapidly consumed. Moreover, increasing the concentration of H₂O₂ from 800 mg L^?1 to 1200 mg L^?1 did not enhance the degradation of ETU. Kinetics studies revealed that the pseudo-second-order model best fit the experimental conditions. The k values for the UV/H₂O₂ and photo-Fenton processes were determined to be 6.2 × 10^?4 mg L^?1 min^?1 and 7.7 × 10^?4 mg L^?1 min^?1, respectively. The mineralization of ETU in the absence of hydrogen peroxide has led to the conclusion that ETU transformation products are susceptible to photolysis by UV light. These are promising results for further research. The processes that were investigated can be used to remove pesticide metabolites from drinking water sources and wastewater in developing countries.