Green renewal: incorporating environmental factors in equipment replacement decisions under technological change

Equipment replacement is a fact of life in every industrial setting, and this paper seeks to answer the question: How can firms and policy makers effectively balance environmental and economic concerns with respect to replacement decisions? A replacement model which includes both economic and environmental factors is presented. One must decide whether to keep the existing technology, upgrade to a newer technology which produces a smaller environmental burden, or wait for an even newer, cleaner technology which may be introduced soon. More than 25 000 test problems are solved, examining different objectives and covering a wide range of applications. Including environmental costs does not lead to a consistent increase in the adoption of cleaner technologies; however, including incentives to adopt newer technologies does. When one accounts for the environmental impact of producing new equipment and disposing of old equipment, earlier adoption of new technologies actually increases the total environmental burden in some cases.     

Removal of Volatile Aliphatic Hydrocarbons in a Soil Bioreactor

Soil removal of propane, isobutane and n-butane from a waste air stream was evaluated in the laboratory and in a prototype soil bioreactor. Laboratory investigations indicated first-order kinetics and the potential to degrade light aliphatic hydrocarbons and trichlorethylene, a compound ordinarily resistant to aerobic biological treatment. The predicted behavior of the bioreactor, based on laboratory studies, agreed closely with the actual behavior of the Reid system. The prototype bioreactor reduced the hydrocarbon concentrations in the air by at least 90percent with a residence time of 15 minutes and a pressure drop of 85 cm of water. The bioreactor functioned well through a range of temperatures, 12°C to 24°C.     

Consistent personality differences in house-hunting behavior but not decision speed in swarms of honey bees (<Emphasis Type="BoldItalic">Apis mellifera</Emphasis>)

Speed-accuracy tradeoffs are a common feature of decision-making processes, both in individual animals and in groups of animals working together to reach a single collective decision. Individual organisms display consistent differences in their “impulsivity,” and vary in their tendency to make rapid, impulsive choices as opposed to slower, more accurate decisions. However, we do not yet know whether groups of animals consistently differ in their tendency to prioritize decision speed over accuracy. We challenged 17 swarms of honey bees (Apis mellifera) to simultaneously choose a new nest site in each of three locations, and measured their decision speeds in each trial. We found that swarms displayed consistent personality differences in the number of waggle dances and shaking signals they performed and in how actively they scouted for new nest sites. However, swarms did not consistently differ in how long they took to choose a nest site. We suggest that house-hunting A. mellifera swarms may place an especially high emphasis on decision accuracy when choosing a nest site, and that chance events—such as the time when each swarm discovers a sufficiently high-quality nest site—may consequently play a greater role in determining a swarm’s decision speed than intrinsic characteristics such as a swarm’s “impulsivity.”     

Feasibility of mercury removal from simulated flue gas by activated chars made from poultry manures

Increased emphasis on reduction of mercury emissions from coal fired electric power plants has resulted in environmental regulations that may in the future require application of activated carbons as mercury sorbents for mercury removal. At the same time, the quantity of poultry manure generated each year is large and technologies that take advantage of the material should be explored. The purpose of the work was to obtain preliminary data to investigate if activated chars made from different poultry manures could adsorb mercury from simulated flue gas. In laboratory experiments, activated chars made from chicken cake and litter removed mercury from the gas as well as a commercial alternative. It was also found that acid-washing these chars after activation may improve pore structure but does not influence the mercury removal efficiency. Activated chars were also made from turkey cake and litter. These raw materials produced activated chars with similar pore structure as those made from chicken manure, but they did not adsorb mercury as well. Acid-washing the turkey manure-based chars improved their performance, but this step would add to the cost of production. Preliminary evaluations suggest that unwashed activated chars may cost as little as $0.95/kg to produce.     

How Should Support for Climate-Friendly Technologies Be Designed?

Stabilizing global greenhouse gas concentrations at levels to avoid significant climate risks will require massive “decarbonization” of all the major economies over the next few decades, in addition to the reduced emissions from other GHGs and carbon sequestration. Achieving the necessary scale of emissions reductions will require a multifaceted policy effort to support a broad array of technological and behavioral changes. Change on this scale will require sound, well-thought-out strategies. In this article, we outline some core principles, drawn from recent social science research, for guiding the design of clean technology policies, with a focus on energy. The market should be encouraged to make good choices: pricing carbon emissions and other environmental damage, removing distorting subsidies and barriers to competition, and supporting RD&D broadly. More specific policies are required to address particular market failures and barriers. For those technologies identified as being particularly desirable, some narrower RD&D policies are available.     

Characterizing sources of nitrate leaching from an irrigated dairy farm in Merced County, California

Dairy farms comprise a complex landscape of groundwater pollution sources. The objective of our work is to develop a method to quantify nitrate leaching to shallow groundwater from different management units at dairy farms. Total nitrate loads are determined by the sequential calibration of a sub-regional scale and a farm-scale three-dimensional groundwater flow and transport model using observations at different spatial scales. These observations include local measurements of groundwater heads and nitrate concentrations in an extensive monitoring well network, providing data at a scale of a few meters and measurements of discharge rates and nitrate concentrations in a tile-drain network, providing data integrated across multiple farms. The various measurement scales are different from the spatial scales of the calibration parameters, which are the recharge and nitrogen leaching rates from individual management units. The calibration procedure offers a conceptual framework for using field measurements at different spatial scales to estimate recharge N concentrations at the management unit scale. It provides a map of spatially varying dairy farming impact on groundwater nitrogen. The method is applied to a dairy farm located in a relatively vulnerable hydrogeologic region in California. Potential sources within the dairy farm are divided into three categories, representing different manure management units: animal exercise yards and feeding areas (corrals), liquid manure holding ponds, and manure irrigated forage fields. Estimated average nitrogen leaching is 872 kg/ha/year, 807 kg/ha/year and 486 kg/ha/year for corrals, ponds and fields respectively. Results are applied to evaluate the accuracy of nitrogen mass balances often used by regulatory agencies to assess groundwater impacts. Calibrated leaching rates compare favorably to field and farm scale nitrogen mass balances. These data and interpretations provide a basis for developing improved management strategies.     

Human impacts on fire occurrence: a case study of hundred years of forest fires in a dry alpine valley in Switzerland

Forest fire regimes are sensitive to alterations of climate, fuel load, and ignition sources. We investigated the impact of human activities and climate on fire occurrence in a dry continental valley of the Swiss Alps (Valais) by relating fire occurrence to population and road density, biomass removal by livestock grazing and wood harvest, temperature and precipitation in two distinct periods (1904–1955 and 1956–2006) using generalized additive modeling. This study provides evidence for the role played by humans and temperature in shaping fire occurrence. The existence of ignition sources promotes fire occurrence to a certain extent only; for example, high road density tends to be related to fewer fires. Changes in forest uses within the study region seem to be particularly important. Fire occurrence appears to have been negatively associated with livestock pasturing in the forest and wood harvesting, in particular during the period 1904–1955. This study illustrates consistently how fire occurrence has been influenced by land use and socioeconomic conditions. It also suggests that there is no straightforward linear relationship between human factors and fire occurrence.     

Stable isotope signatures for characterising the biological stability of landfilled municipal solid waste

Stable isotopic signatures of landfill leachates are influenced by processes within municipal solid waste (MSW) landfills mainly depending on the aerobic/anaerobic phase of the landfill. We investigated the isotopic signatures of δ¹³C, δ²H and δ¹⁸O of different leachates from lab-scale experiments, lysimeter experiments and a landfill under in situ aeration. In the laboratory, columns filled with MSW of different age and reactivity were percolated under aerobic and anaerobic conditions. In landfill simulation reactors, waste of a 25 year old landfill was kept under aerobic and anaerobic conditions. The lysimeter facility was filled with mechanically shredded fresh waste. After starting of the methane production the waste in the lysimeter containments was aerated in situ. Leachate and gas composition were monitored continuously. In addition the seepage water of an old landfill was collected and analysed periodically before and during an in situ aeration.We found significant differences in the δ¹³C-value of the dissolved inorganic carbon (δ¹³C-DIC) of the leachate between aerobic and anaerobic waste material. During aerobic degradation, the signature of δ¹³C-DIC was mainly dependent on the isotopic composition of the organic matter in the waste, resulting in a δ¹³C-DIC of ?20‰ to ?25‰. The production of methane under anaerobic conditions caused an increase in δ¹³C-DIC up to values of +10‰ and higher depending on the actual reactivity of the MSW. During aeration of a landfill the aerobic degradation of the remaining organic matter caused a decrease to a δ¹³C-DIC of about ?20‰. Therefore carbon isotope analysis in leachates and groundwater can be used for tracing the oxidation–reduction status of MSW landfills.Our results indicate that monitoring of stable isotopic signatures of landfill leachates over a longer time period (e.g. during in situ aeration) is a powerful and cost-effective tool for characterising the biodegradability and stability of the organic matter in landfilled municipal solid waste and can be used for monitoring the progress of in situ aeration.